qscan-1.2/0000777000175000006270000000000007546763746006260 5qscan-1.2/README0000644000175000006270000001633707546763742007062 .:. QSCAN .:. Documentation for version 1.0 ------------------------ BLURB ------------------------ The Qmail virus scanner (QScan) is a mail filter for Qmail that scans incoming messages using the Sophos Antivirus engine, immediately rejecting infected content. It is designed to be minimalistic, yet extremely fast and secure, and uses multiple pipes instead of the traditional temporary files and privilege separation. It works with non-native versions of the virus scanner (such as under OpenBSD with Linux or FreeBSD emulation). ------------------------ REQUIREMENTS ------------------------ QScan requires three properly installed helpers : - ripmime, available from http://www.pldaniels.com/ripmime/ - sweep, part of the Sophos Antivirus - http://www.sophos.com/ - Qmail :) ------------------------ INSTALLATION ------------------------ You must create a temporary directory to extract MIME attachments, and replace Qmail's original qmail-queue program with Qscan. Quick way to achieve this for the impatients : mkdir /var/qmail/qscan chmod 700 /var/qmail/qscan chown qmaild:qmail /var/qmail/qscan ln /var/qmail/bin/qmail-queue /var/qmail/bin/qmail-queue-old Now, let's compile and install Qscan : ./configure --help ./configure [your beloved flags] make install-strip The last step is to replace the original qmail-queue program with our filter : rm /var/qmail/bin/qmail-queue ln -s /usr/local/sbin/qscan /var/qmail/bin/qmail-queue Depending on your local configuration, it may be needed or not, but start with doing it : chown qmaild:qmail /usr/local/sbin/qscan chmod 6711 /usr/local/sbin/qscan After testing, if everything's ok for you, remove the setuid bit : chown 0:0 /usr/local/sbin/qscan chmod 711 /usr/local/sbin/qscan Nota : To compile under Irix, you have to issue this before typing ./configure : export CC=cc export CFLAGS=-I/usr/freeware/include export LDFLAGS=-L/usr/freeware/lib32 To compile under Solaris 8, use GNU Make, not Solaris basic make. Then do : export PATH=/usr/ccs/bin:$PATH export MAKE=gmake ------------------------ CONCURRENCY LIMITS ------------------------ As virus scanning is a CPU-intensive operation, QScan tries to be smart and enforces a concurrency limit. By default, only 10 mails are scanned for virus at the same time. It doesn't mean that you can't receive more simultanous mails, though. You can receive an unlimited number of mails coming from the local network, and an unlimited number of mails without attachments from the network. But mails coming from a remote source with suspect attachments will be a bit delayed if already 10 scanners are currently running. It's a preventive mesure against unwanted CPU hogs. If your system is fast enough, you can raise the limit with the --with-concurrency switch passed to the 'configure' script. For instance : ./configure --with-concurrency=10 On the other hand, on low-end personal machines, you can lower that limit down to 1. ------------------------ USAGE ------------------------ Once the link from /var/qmail/bin/qmail-queue to /usr/local/sbin/qscan has been created, the filter should be active. Check that everything's working by sending *FROM A REMOTE MACHINE* a mail with random content. The delivered mail should have a Received: header line with 'qscan' in its content. Then, check the virus scanner by sending the traditional EICAR fake virus. Your mail should be blocked, and additional info should be logged in /var/log/maillog (or wherever your syslog messages with the 'mail' facility are going to) . To avoid useless MIME extraction and analys, Qscan will bypass all filters and directly replace itself with qmail-queue-old if : - the mail was locally injected. Local redirections through .qmail files and fastforward are smartly handled, scanning only occurs once. - the QS_BYPASS environment variable is defined. Feel free to define it the same way you define RELAYHOST to allow relaying to your internal network. ------------------------ ARCHITECTURE ------------------------ qmail-smtpd a,d qmail-qmtpd feed qscan with two streams as data is received from a remote client : - descriptor 0 contains the body of the incoming message, - descriptor 1 is the envelope data. After sanity checks, qscan spawns ripmime and qmail-queue-old. The message is read from qmail-smtpd and asynchronously dispatched to ripmime and qmail-queue-old. +------> qmail-queue-old (0) | | qmail-smtpd (0) -------> qscan | | +------> ripmime (0) ripmime fills /var/qmail/qscan// with found attachments, and qmail-queue-old stores the original data in a temporary queue. ripmime is then killed, while qmail-queue-old stays on hold, waiting for envelope data. If /var/qmail/scan// is not empty, the current concurrency is evaluated by reading the number of directories in /var/qmail/scan/ . If the concurrency is above the max one, the client is placed on hold until the number decreases. If the number is still high after one minute, a 99 error code (temporary error) is returned, so that the remote client will retry later. Please note that there's a little race, as no locking is made when evaluating the number of active scanners. In a real world, it's not harmful, and it keeps the code simple. As soon as possible, the sweep virus scanned is spawned to walk into the /var/qmail/scan/ directory. qscan read the output of the sweep command to check for alerts. +------> qmail-queue-old (0) | | qmail-smtpd (0) -------> qscan ^ | +------- sweep (1) If a system call fails, or if a child unexpectedly dies, qscan removes the MIME extraction folder and exits with error code 99. If a virus is reported, qscan send the report to syslog, removes the MIME extraction folder and exits with error code 39 (reported as a permanent error by qmail-smtpd) . In both cases, an early closed pipe causes qmail-queue-old to clean its own queue. If the message can safely be delivered, qscan transparently bridges the envelope from qmail-smtpd to qmail-queue-old : qmail-smtpd (1) -------> qscan -------> qmail-queue-old (1) Once the envelope has been fed, qmail-send is triggered and injects it in the Qmail's todo queue. ------------------------ SECURITY CONSIDERATIONS ------------------------ qscan needs read and write access to the /var/qmail/qscan directory. ripmime needs only write access to the /var/qmail/qscan directory. sweep needs only read access to the /var/qmail/qscan directory. ripmime and sweep can be chroot()ed and/or systraced. No shell is ever spawned. -Frank DENIS "Jedi/Sector One" . qscan-1.2/AUTHORS0000644000175000006270000000003307546574321007225 Jedi/Sector One qscan-1.2/COPYING0000644000175000006270000004311007507257261007211 GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation's software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Library General Public License instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things. To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software. Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all. The precise terms and conditions for copying, distribution and modification follow. GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The "Program", below, refers to any such program or work, and a "work based on the Program" means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as "you". Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does. 1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change. b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License. c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following: a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.) The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation. 10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found. Copyright (C) This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Also add information on how to contact you by electronic and paper mail. If the program is interactive, make it output a short notice like this when it starts in an interactive mode: Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. This is free software, and you are welcome to redistribute it under certain conditions; type `show c' for details. The hypothetical commands `show w' and `show c' should show the appropriate parts of the General Public License. Of course, the commands you use may be called something other than `show w' and `show c'; they could even be mouse-clicks or menu items--whatever suits your program. You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the program, if necessary. Here is a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision' (which makes passes at compilers) written by James Hacker. , 1 April 1989 Ty Coon, President of Vice This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Library General Public License instead of this License. qscan-1.2/ChangeLog0000644000175000006270000000050207546763653007740 * Version 1.2 : Check for nanosleep, and use it in place of usleep whenever possible. See the new wait_seconds() function. Default concurrency limit bumped to 10. * Version 1.1 : Implement concurrency limit : new --with-concurrency autoconf switch. Dmalloc support. * Version 1.0 : Initial release. qscan-1.2/INSTALL0000644000175000006270000002230607507257261007213 Copyright 1994, 1995, 1996, 1999, 2000, 2001 Free Software Foundation, Inc. This file is free documentation; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. Basic Installation ================== These are generic installation instructions. The `configure' shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses those values to create a `Makefile' in each directory of the package. It may also create one or more `.h' files containing system-dependent definitions. Finally, it creates a shell script `config.status' that you can run in the future to recreate the current configuration, and a file `config.log' containing compiler output (useful mainly for debugging `configure'). It can also use an optional file (typically called `config.cache' and enabled with `--cache-file=config.cache' or simply `-C') that saves the results of its tests to speed up reconfiguring. (Caching is disabled by default to prevent problems with accidental use of stale cache files.) If you need to do unusual things to compile the package, please try to figure out how `configure' could check whether to do them, and mail diffs or instructions to the address given in the `README' so they can be considered for the next release. If you are using the cache, and at some point `config.cache' contains results you don't want to keep, you may remove or edit it. The file `configure.ac' (or `configure.in') is used to create `configure' by a program called `autoconf'. You only need `configure.ac' if you want to change it or regenerate `configure' using a newer version of `autoconf'. The simplest way to compile this package is: 1. `cd' to the directory containing the package's source code and type `./configure' to configure the package for your system. If you're using `csh' on an old version of System V, you might need to type `sh ./configure' instead to prevent `csh' from trying to execute `configure' itself. Running `configure' takes awhile. While running, it prints some messages telling which features it is checking for. 2. Type `make' to compile the package. 3. Optionally, type `make check' to run any self-tests that come with the package. 4. Type `make install' to install the programs and any data files and documentation. 5. You can remove the program binaries and object files from the source code directory by typing `make clean'. To also remove the files that `configure' created (so you can compile the package for a different kind of computer), type `make distclean'. There is also a `make maintainer-clean' target, but that is intended mainly for the package's developers. If you use it, you may have to get all sorts of other programs in order to regenerate files that came with the distribution. Compilers and Options ===================== Some systems require unusual options for compilation or linking that the `configure' script does not know about. Run `./configure --help' for details on some of the pertinent environment variables. You can give `configure' initial values for variables by setting them in the environment. You can do that on the command line like this: ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix *Note Defining Variables::, for more details. Compiling For Multiple Architectures ==================================== You can compile the package for more than one kind of computer at the same time, by placing the object files for each architecture in their own directory. To do this, you must use a version of `make' that supports the `VPATH' variable, such as GNU `make'. `cd' to the directory where you want the object files and executables to go and run the `configure' script. `configure' automatically checks for the source code in the directory that `configure' is in and in `..'. If you have to use a `make' that does not support the `VPATH' variable, you have to compile the package for one architecture at a time in the source code directory. After you have installed the package for one architecture, use `make distclean' before reconfiguring for another architecture. Installation Names ================== By default, `make install' will install the package's files in `/usr/local/bin', `/usr/local/man', etc. You can specify an installation prefix other than `/usr/local' by giving `configure' the option `--prefix=PATH'. You can specify separate installation prefixes for architecture-specific files and architecture-independent files. If you give `configure' the option `--exec-prefix=PATH', the package will use PATH as the prefix for installing programs and libraries. Documentation and other data files will still use the regular prefix. In addition, if you use an unusual directory layout you can give options like `--bindir=PATH' to specify different values for particular kinds of files. Run `configure --help' for a list of the directories you can set and what kinds of files go in them. If the package supports it, you can cause programs to be installed with an extra prefix or suffix on their names by giving `configure' the option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. Optional Features ================= Some packages pay attention to `--enable-FEATURE' options to `configure', where FEATURE indicates an optional part of the package. They may also pay attention to `--with-PACKAGE' options, where PACKAGE is something like `gnu-as' or `x' (for the X Window System). The `README' should mention any `--enable-' and `--with-' options that the package recognizes. For packages that use the X Window System, `configure' can usually find the X include and library files automatically, but if it doesn't, you can use the `configure' options `--x-includes=DIR' and `--x-libraries=DIR' to specify their locations. Specifying the System Type ========================== There may be some features `configure' cannot figure out automatically, but needs to determine by the type of host the package will run on. Usually `configure' can figure that out, but if it prints a message saying it cannot guess the host type, give it the `--build=TYPE' option. TYPE can either be a short name for the system type, such as `sun4', or a canonical name which has the form: CPU-COMPANY-SYSTEM where SYSTEM can have one of these forms: OS KERNEL-OS See the file `config.sub' for the possible values of each field. If `config.sub' isn't included in this package, then this package doesn't need to know the host type. If you are _building_ compiler tools for cross-compiling, you should use the `--target=TYPE' option to select the type of system they will produce code for. If you want to _use_ a cross compiler, that generates code for a platform different from the build platform, you should specify the host platform (i.e., that on which the generated programs will eventually be run) with `--host=TYPE'. In this case, you should also specify the build platform with `--build=TYPE', because, in this case, it may not be possible to guess the build platform (it sometimes involves compiling and running simple test programs, and this can't be done if the compiler is a cross compiler). Sharing Defaults ================ If you want to set default values for `configure' scripts to share, you can create a site shell script called `config.site' that gives default values for variables like `CC', `cache_file', and `prefix'. `configure' looks for `PREFIX/share/config.site' if it exists, then `PREFIX/etc/config.site' if it exists. Or, you can set the `CONFIG_SITE' environment variable to the location of the site script. A warning: not all `configure' scripts look for a site script. Defining Variables ================== Variables not defined in a site shell script can be set in the environment passed to `configure'. However, some packages may run configure again during the build, and the customized values of these variables may be lost. In order to avoid this problem, you should set them in the `configure' command line, using `VAR=value'. For example: ./configure CC=/usr/local2/bin/gcc will cause the specified gcc to be used as the C compiler (unless it is overridden in the site shell script). `configure' Invocation ====================== `configure' recognizes the following options to control how it operates. `--help' `-h' Print a summary of the options to `configure', and exit. `--version' `-V' Print the version of Autoconf used to generate the `configure' script, and exit. `--cache-file=FILE' Enable the cache: use and save the results of the tests in FILE, traditionally `config.cache'. FILE defaults to `/dev/null' to disable caching. `--config-cache' `-C' Alias for `--cache-file=config.cache'. `--quiet' `--silent' `-q' Do not print messages saying which checks are being made. To suppress all normal output, redirect it to `/dev/null' (any error messages will still be shown). `--srcdir=DIR' Look for the package's source code in directory DIR. Usually `configure' can determine that directory automatically. `configure' also accepts some other, not widely useful, options. Run `configure --help' for more details. qscan-1.2/Makefile.am0000644000175000006270000000005207546574321010212 AUTOMAKE_OPTIONS = 1.4 SUBDIRS = \ src qscan-1.2/Makefile.in0000644000175000006270000003132207546762440010230 # Makefile.in generated by automake 1.6.1 from Makefile.am. # @configure_input@ # Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 # Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ SHELL = @SHELL@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ prefix = @prefix@ exec_prefix = @exec_prefix@ bindir = @bindir@ sbindir = @sbindir@ libexecdir = @libexecdir@ datadir = @datadir@ sysconfdir = @sysconfdir@ sharedstatedir = @sharedstatedir@ localstatedir = @localstatedir@ libdir = @libdir@ infodir = @infodir@ mandir = @mandir@ includedir = @includedir@ oldincludedir = /usr/include pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = . ACLOCAL = @ACLOCAL@ AUTOCONF = @AUTOCONF@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_DATA = @INSTALL_DATA@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_HEADER = $(INSTALL_DATA) transform = @program_transform_name@ NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : EXEEXT = @EXEEXT@ OBJEXT = @OBJEXT@ PATH_SEPARATOR = @PATH_SEPARATOR@ AMTAR = @AMTAR@ AWK = @AWK@ CC = @CC@ DEPDIR = @DEPDIR@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ ISODATE = @ISODATE@ PACKAGE = @PACKAGE@ QMAIL_QUEUE = @QMAIL_QUEUE@ RIPMIME = @RIPMIME@ STRIP = @STRIP@ SWEEP = @SWEEP@ VERSION = @VERSION@ am__include = @am__include@ am__quote = @am__quote@ install_sh = @install_sh@ AUTOMAKE_OPTIONS = 1.4 SUBDIRS = \ src subdir = . ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = config.h CONFIG_CLEAN_FILES = depcomp = am__depfiles_maybe = DIST_SOURCES = RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \ uninstall-info-recursive all-recursive install-data-recursive \ install-exec-recursive installdirs-recursive install-recursive \ uninstall-recursive check-recursive installcheck-recursive DIST_COMMON = README AUTHORS COPYING ChangeLog INSTALL Makefile.am \ Makefile.in NEWS aclocal.m4 config.h.in configure configure.ac \ install-sh missing mkinstalldirs DIST_SUBDIRS = $(SUBDIRS) all: config.h $(MAKE) $(AM_MAKEFLAGS) all-recursive .SUFFIXES: $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.ac $(ACLOCAL_M4) cd $(top_srcdir) && \ $(AUTOMAKE) --gnu --ignore-deps Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe) $(top_builddir)/config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(srcdir)/configure: $(srcdir)/configure.ac $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) cd $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): configure.ac cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) config.h: stamp-h1 @if test ! -f $@; then \ rm -f stamp-h1; \ $(MAKE) stamp-h1; \ else :; fi stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status @rm -f stamp-h1 cd $(top_builddir) && $(SHELL) ./config.status config.h $(srcdir)/config.h.in: $(top_srcdir)/configure.ac $(ACLOCAL_M4) cd $(top_srcdir) && $(AUTOHEADER) touch $(srcdir)/config.h.in distclean-hdr: -rm -f config.h uninstall-info-am: # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @set fnord $$MAKEFLAGS; amf=$$2; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" mostlyclean-recursive clean-recursive distclean-recursive \ maintainer-clean-recursive: @set fnord $$MAKEFLAGS; amf=$$2; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ETAGS = etags ETAGSFLAGS = tags: TAGS ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ mkid -fID $$unique TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(ETAGS_ARGS)$$tags$$unique" \ || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) top_distdir = . distdir = $(PACKAGE)-$(VERSION) am__remove_distdir = \ { test ! -d $(distdir) \ || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ && rm -fr $(distdir); }; } GZIP_ENV = --best distcleancheck_listfiles = find . -type f -print distdir: $(DISTFILES) $(am__remove_distdir) mkdir $(distdir) @for file in $(DISTFILES); do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkinstalldirs) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d $(distdir)/$$subdir \ || mkdir $(distdir)/$$subdir \ || exit 1; \ (cd $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$(top_distdir)" \ distdir=../$(distdir)/$$subdir \ distdir) \ || exit 1; \ fi; \ done -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r $(distdir) dist-gzip: distdir $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) dist dist-all: distdir $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist $(am__remove_distdir) GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf - chmod -R a-w $(distdir); chmod a+w $(distdir) mkdir $(distdir)/=build mkdir $(distdir)/=inst chmod a-w $(distdir) dc_install_base=`$(am__cd) $(distdir)/=inst && pwd` \ && cd $(distdir)/=build \ && ../configure --srcdir=.. --prefix=$$dc_install_base \ $(DISTCHECK_CONFIGURE_FLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ && (test `find $$dc_install_base -type f -print | wc -l` -le 1 \ || { echo "ERROR: files left after uninstall:" ; \ find $$dc_install_base -type f -print ; \ exit 1; } >&2 ) \ && $(MAKE) $(AM_MAKEFLAGS) dist-gzip \ && rm -f $(distdir).tar.gz \ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck $(am__remove_distdir) @echo "$(distdir).tar.gz is ready for distribution" | \ sed 'h;s/./=/g;p;x;p;x' distcleancheck: distclean if test '$(srcdir)' = . ; then \ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ exit 1 ; \ fi test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left after distclean:" ; \ $(distcleancheck_listfiles) ; \ exit 1; } >&2 check-am: all-am check: check-recursive all-am: Makefile config.h installdirs: installdirs-recursive installdirs-am: install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]* maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic mostlyclean-am distclean: distclean-recursive -rm -f config.status config.cache config.log distclean-am: clean-am distclean-generic distclean-hdr distclean-tags dvi: dvi-recursive dvi-am: info: info-recursive info-am: install-data-am: install-exec-am: install-info: install-info-recursive install-man: installcheck-am: maintainer-clean: maintainer-clean-recursive maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic uninstall-am: uninstall-info-am uninstall-info: uninstall-info-recursive .PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am check check-am clean \ clean-generic clean-recursive dist dist-all dist-gzip distcheck \ distclean distclean-generic distclean-hdr distclean-recursive \ distclean-tags distcleancheck distdir dvi dvi-am dvi-recursive \ info info-am info-recursive install install-am install-data \ install-data-am install-data-recursive install-exec \ install-exec-am install-exec-recursive install-info \ install-info-am install-info-recursive install-man \ install-recursive install-strip installcheck installcheck-am \ installdirs installdirs-am installdirs-recursive \ maintainer-clean maintainer-clean-generic \ maintainer-clean-recursive mostlyclean mostlyclean-generic \ mostlyclean-recursive tags tags-recursive uninstall \ uninstall-am uninstall-info-am uninstall-info-recursive \ uninstall-recursive # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: qscan-1.2/NEWS0000644000175000006270000000046707546763673006701 * Version 1.2 : - This versions fixes a compilation issue on some GlibC versions. Reported by Aaron East . - The default concurrency limit has been bumped to 10. * Version 1.1 : - Concurrency limits for running virus scanners are now enforced. * Version 1.0 : - Initial release. qscan-1.2/aclocal.m40000644000175000006270000010000707546762440010020 # aclocal.m4 generated automatically by aclocal 1.6.1 -*- Autoconf -*- # Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2002 # Free Software Foundation, Inc. # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. # Do all the work for Automake. -*- Autoconf -*- # This macro actually does too much some checks are only needed if # your package does certain things. But this isn't really a big deal. # Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2002 # Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # serial 8 # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be # written in clear, in which case automake, when reading aclocal.m4, # will think it sees a *use*, and therefore will trigger all it's # C support machinery. Also note that it means that autoscan, seeing # CC etc. in the Makefile, will ask for an AC_PROG_CC use... AC_PREREQ([2.52]) # Autoconf 2.50 wants to disallow AM_ names. We explicitly allow # the ones we care about. m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl # AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) # AM_INIT_AUTOMAKE([OPTIONS]) # ----------------------------------------------- # The call with PACKAGE and VERSION arguments is the old style # call (pre autoconf-2.50), which is being phased out. PACKAGE # and VERSION should now be passed to AC_INIT and removed from # the call to AM_INIT_AUTOMAKE. # We support both call styles for the transition. After # the next Automake release, Autoconf can make the AC_INIT # arguments mandatory, and then we can depend on a new Autoconf # release and drop the old call support. AC_DEFUN([AM_INIT_AUTOMAKE], [AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl AC_REQUIRE([AC_PROG_INSTALL])dnl # test to see if srcdir already configured if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) fi # Define the identity of the package. dnl Distinguish between old-style and new-style calls. m4_ifval([$2], [m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl AC_SUBST([PACKAGE], [$1])dnl AC_SUBST([VERSION], [$2])], [_AM_SET_OPTIONS([$1])dnl AC_SUBST([PACKAGE], [AC_PACKAGE_TARNAME])dnl AC_SUBST([VERSION], [AC_PACKAGE_VERSION])])dnl _AM_IF_OPTION([no-define],, [AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl # Some tools Automake needs. AC_REQUIRE([AM_SANITY_CHECK])dnl AC_REQUIRE([AC_ARG_PROGRAM])dnl AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) AM_MISSING_PROG(AUTOCONF, autoconf) AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) AM_MISSING_PROG(AUTOHEADER, autoheader) AM_MISSING_PROG(MAKEINFO, makeinfo) AM_MISSING_PROG(AMTAR, tar) AM_PROG_INSTALL_SH AM_PROG_INSTALL_STRIP # We need awk for the "check" target. The system "awk" is bad on # some platforms. AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([AC_PROG_MAKE_SET])dnl _AM_IF_OPTION([no-dependencies],, [AC_PROVIDE_IFELSE([AC_PROG_][CC], [_AM_DEPENDENCIES(CC)], [define([AC_PROG_][CC], defn([AC_PROG_][CC])[_AM_DEPENDENCIES(CC)])])dnl AC_PROVIDE_IFELSE([AC_PROG_][CXX], [_AM_DEPENDENCIES(CXX)], [define([AC_PROG_][CXX], defn([AC_PROG_][CXX])[_AM_DEPENDENCIES(CXX)])])dnl ]) ]) # Copyright 2002 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # AM_AUTOMAKE_VERSION(VERSION) # ---------------------------- # Automake X.Y traces this macro to ensure aclocal.m4 has been # generated from the m4 files accompanying Automake X.Y. AC_DEFUN([AM_AUTOMAKE_VERSION],[am__api_version="1.6"]) # AM_SET_CURRENT_AUTOMAKE_VERSION # ------------------------------- # Call AM_AUTOMAKE_VERSION so it can be traced. # This function is AC_REQUIREd by AC_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], [AM_AUTOMAKE_VERSION([1.6.1])]) # Helper functions for option handling. -*- Autoconf -*- # Copyright 2001, 2002 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # serial 2 # _AM_MANGLE_OPTION(NAME) # ----------------------- AC_DEFUN([_AM_MANGLE_OPTION], [[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) # _AM_SET_OPTION(NAME) # ------------------------------ # Set option NAME. Presently that only means defining a flag for this option. AC_DEFUN([_AM_SET_OPTION], [m4_define(_AM_MANGLE_OPTION([$1]), 1)]) # _AM_SET_OPTIONS(OPTIONS) # ---------------------------------- # OPTIONS is a space-separated list of Automake options. AC_DEFUN([_AM_SET_OPTIONS], [AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) # ------------------------------------------- # Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. AC_DEFUN([_AM_IF_OPTION], [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) # # Check to make sure that the build environment is sane. # # Copyright 1996, 1997, 2000, 2001 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # serial 3 # AM_SANITY_CHECK # --------------- AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) # Just in case sleep 1 echo timestamp > conftest.file # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` if test "$[*]" = "X"; then # -L didn't work. set X `ls -t $srcdir/configure conftest.file` fi rm -f conftest.file if test "$[*]" != "X $srcdir/configure conftest.file" \ && test "$[*]" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken alias in your environment]) fi test "$[2]" = conftest.file ) then # Ok. : else AC_MSG_ERROR([newly created file is older than distributed files! Check your system clock]) fi AC_MSG_RESULT(yes)]) # -*- Autoconf -*- # Copyright 1997, 1999, 2000, 2001 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # serial 3 # AM_MISSING_PROG(NAME, PROGRAM) # ------------------------------ AC_DEFUN([AM_MISSING_PROG], [AC_REQUIRE([AM_MISSING_HAS_RUN]) $1=${$1-"${am_missing_run}$2"} AC_SUBST($1)]) # AM_MISSING_HAS_RUN # ------------------ # Define MISSING if not defined so far and test if it supports --run. # If it does, set am_missing_run to use it, otherwise, to nothing. AC_DEFUN([AM_MISSING_HAS_RUN], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" # Use eval to expand $SHELL if eval "$MISSING --run true"; then am_missing_run="$MISSING --run " else am_missing_run= AC_MSG_WARN([`missing' script is too old or missing]) fi ]) # AM_AUX_DIR_EXPAND # Copyright 2001 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets # $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to # `$srcdir', `$srcdir/..', or `$srcdir/../..'. # # Of course, Automake must honor this variable whenever it calls a # tool from the auxiliary directory. The problem is that $srcdir (and # therefore $ac_aux_dir as well) can be either absolute or relative, # depending on how configure is run. This is pretty annoying, since # it makes $ac_aux_dir quite unusable in subdirectories: in the top # source directory, any form will work fine, but in subdirectories a # relative path needs to be adjusted first. # # $ac_aux_dir/missing # fails when called from a subdirectory if $ac_aux_dir is relative # $top_srcdir/$ac_aux_dir/missing # fails if $ac_aux_dir is absolute, # fails when called from a subdirectory in a VPATH build with # a relative $ac_aux_dir # # The reason of the latter failure is that $top_srcdir and $ac_aux_dir # are both prefixed by $srcdir. In an in-source build this is usually # harmless because $srcdir is `.', but things will broke when you # start a VPATH build or use an absolute $srcdir. # # So we could use something similar to $top_srcdir/$ac_aux_dir/missing, # iff we strip the leading $srcdir from $ac_aux_dir. That would be: # am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` # and then we would define $MISSING as # MISSING="\${SHELL} $am_aux_dir/missing" # This will work as long as MISSING is not called from configure, because # unfortunately $(top_srcdir) has no meaning in configure. # However there are other variables, like CC, which are often used in # configure, and could therefore not use this "fixed" $ac_aux_dir. # # Another solution, used here, is to always expand $ac_aux_dir to an # absolute PATH. The drawback is that using absolute paths prevent a # configured tree to be moved without reconfiguration. # Rely on autoconf to set up CDPATH properly. AC_PREREQ([2.50]) AC_DEFUN([AM_AUX_DIR_EXPAND], [ # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` ]) # AM_PROG_INSTALL_SH # ------------------ # Define $install_sh. # Copyright 2001 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. AC_DEFUN([AM_PROG_INSTALL_SH], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl install_sh=${install_sh-"$am_aux_dir/install-sh"} AC_SUBST(install_sh)]) # AM_PROG_INSTALL_STRIP # Copyright 2001 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # One issue with vendor `install' (even GNU) is that you can't # specify the program used to strip binaries. This is especially # annoying in cross-compiling environments, where the build's strip # is unlikely to handle the host's binaries. # Fortunately install-sh will honor a STRIPPROG variable, so we # always use install-sh in `make install-strip', and initialize # STRIPPROG with the value of the STRIP variable (set by the user). AC_DEFUN([AM_PROG_INSTALL_STRIP], [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl # Installed binaries are usually stripped using `strip' when the user # run `make install-strip'. However `strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the `STRIP' environment variable to overrule this program. dnl Don't test for $cross_compiling = yes, because it might be `maybe'. if test "$cross_compiling" != no; then AC_CHECK_TOOL([STRIP], [strip], :) fi INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) # serial 4 -*- Autoconf -*- # Copyright 1999, 2000, 2001 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be # written in clear, in which case automake, when reading aclocal.m4, # will think it sees a *use*, and therefore will trigger all it's # C support machinery. Also note that it means that autoscan, seeing # CC etc. in the Makefile, will ask for an AC_PROG_CC use... # _AM_DEPENDENCIES(NAME) # ---------------------- # See how the compiler implements dependency checking. # NAME is "CC", "CXX", "GCJ", or "OBJC". # We try a few techniques and use that to set a single cache variable. # # We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was # modified to invoke _AM_DEPENDENCIES(CC); we would have a circular # dependency, and given that the user is not expected to run this macro, # just rely on AC_PROG_CC. AC_DEFUN([_AM_DEPENDENCIES], [AC_REQUIRE([AM_SET_DEPDIR])dnl AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl AC_REQUIRE([AM_MAKE_INCLUDE])dnl AC_REQUIRE([AM_DEP_TRACK])dnl ifelse([$1], CC, [depcc="$CC" am_compiler_list=], [$1], CXX, [depcc="$CXX" am_compiler_list=], [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'] [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], [depcc="$$1" am_compiler_list=]) AC_CACHE_CHECK([dependency style of $depcc], [am_cv_$1_dependencies_compiler_type], [if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named `D' -- because `-MD' means `put the output # in D'. mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir am_cv_$1_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` fi for depmode in $am_compiler_list; do # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. echo '#include "conftest.h"' > conftest.c echo 'int i;' > conftest.h echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf case $depmode in nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; none) break ;; esac # We check with `-c' and `-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle `-M -o', and we need to detect this. if depmode=$depmode \ source=conftest.c object=conftest.o \ depfile=conftest.Po tmpdepfile=conftest.TPo \ $SHELL ./depcomp $depcc -c conftest.c -o conftest.o >/dev/null 2>&1 && grep conftest.h conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then am_cv_$1_dependencies_compiler_type=$depmode break fi done cd .. rm -rf conftest.dir else am_cv_$1_dependencies_compiler_type=none fi ]) AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) ]) # AM_SET_DEPDIR # ------------- # Choose a directory name for dependency files. # This macro is AC_REQUIREd in _AM_DEPENDENCIES AC_DEFUN([AM_SET_DEPDIR], [rm -f .deps 2>/dev/null mkdir .deps 2>/dev/null if test -d .deps; then DEPDIR=.deps else # MS-DOS does not allow filenames that begin with a dot. DEPDIR=_deps fi rmdir .deps 2>/dev/null AC_SUBST([DEPDIR]) ]) # AM_DEP_TRACK # ------------ AC_DEFUN([AM_DEP_TRACK], [AC_ARG_ENABLE(dependency-tracking, [ --disable-dependency-tracking Speeds up one-time builds --enable-dependency-tracking Do not reject slow dependency extractors]) if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' fi AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) AC_SUBST([AMDEPBACKSLASH]) ]) # Generate code to set up dependency tracking. -*- Autoconf -*- # Copyright 1999, 2000, 2001, 2002 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. #serial 2 # _AM_OUTPUT_DEPENDENCY_COMMANDS # ------------------------------ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], [for mf in $CONFIG_FILES; do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` if (sed 1q $mf | fgrep 'generated by automake') > /dev/null 2>&1; then dirpart=`AS_DIRNAME("$mf")` else continue fi grep '^DEP_FILES *= *[[^ @%:@]]' < "$mf" > /dev/null || continue # Extract the definition of DEP_FILES from the Makefile without # running `make'. DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"` test -z "$DEPDIR" && continue # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n -e '/^U = / s///p' < "$mf"` test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR" # We invoke sed twice because it is the simplest approach to # changing $(DEPDIR) to its actual value in the expansion. for file in `sed -n -e ' /^DEP_FILES = .*\\\\$/ { s/^DEP_FILES = // :loop s/\\\\$// p n /\\\\$/ b loop p } /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`AS_DIRNAME(["$file"])` AS_MKDIR_P([$dirpart/$fdir]) # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done ])# _AM_OUTPUT_DEPENDENCY_COMMANDS # AM_OUTPUT_DEPENDENCY_COMMANDS # ----------------------------- # This macro should only be invoked once -- use via AC_REQUIRE. # # This code is only required when automatic dependency tracking # is enabled. FIXME. This creates each `.P' file that we will # need in order to bootstrap the dependency handling code. AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], [AC_CONFIG_COMMANDS([depfiles], [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) ]) # Copyright 2001 Free Software Foundation, Inc. -*- Autoconf -*- # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # serial 2 # AM_MAKE_INCLUDE() # ----------------- # Check to see how make treats includes. AC_DEFUN([AM_MAKE_INCLUDE], [am_make=${MAKE-make} cat > confinc << 'END' doit: @echo done END # If we don't find an include directive, just comment out the code. AC_MSG_CHECKING([for style of include used by $am_make]) am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf # We grep out `Entering directory' and `Leaving directory' # messages which can occur if `w' ends up in MAKEFLAGS. # In particular we don't look at `^make:' because GNU make might # be invoked under some other name (usually "gmake"), in which # case it prints its new name instead of `make'. if test "`$am_make -s -f confmf 2> /dev/null | fgrep -v 'ing directory'`" = "done"; then am__include=include am__quote= _am_result=GNU fi # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then am__include=.include am__quote="\"" _am_result=BSD fi fi AC_SUBST(am__include) AC_SUBST(am__quote) AC_MSG_RESULT($_am_result) rm -f confinc confmf ]) # AM_CONDITIONAL -*- Autoconf -*- # Copyright 1997, 2000, 2001 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # serial 5 AC_PREREQ(2.52) # AM_CONDITIONAL(NAME, SHELL-CONDITION) # ------------------------------------- # Define a conditional. AC_DEFUN([AM_CONDITIONAL], [ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl AC_SUBST([$1_TRUE]) AC_SUBST([$1_FALSE]) if $2; then $1_TRUE= $1_FALSE='#' else $1_TRUE='#' $1_FALSE= fi AC_CONFIG_COMMANDS_PRE( [if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then AC_MSG_ERROR([conditional \"$1\" was never defined. Usually this means the macro was only invoked conditionally.]) fi])]) # Like AC_CONFIG_HEADER, but automatically create stamp file. -*- Autoconf -*- # Copyright 1996, 1997, 2000, 2001 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. AC_PREREQ([2.52]) # serial 6 # When config.status generates a header, we must update the stamp-h file. # This file resides in the same directory as the config header # that is generated. We must strip everything past the first ":", # and everything past the last "/". # _AM_DIRNAME(PATH) # ----------------- # Like AS_DIRNAME, only do it during macro expansion AC_DEFUN([_AM_DIRNAME], [m4_if(regexp([$1], [^.*[^/]//*[^/][^/]*/*$]), -1, m4_if(regexp([$1], [^//\([^/]\|$\)]), -1, m4_if(regexp([$1], [^/.*]), -1, [.], patsubst([$1], [^\(/\).*], [\1])), patsubst([$1], [^\(//\)\([^/].*\|$\)], [\1])), patsubst([$1], [^\(.*[^/]\)//*[^/][^/]*/*$], [\1]))[]dnl ])# _AM_DIRNAME # The stamp files are numbered to have different names. # We could number them on a directory basis, but that's additional # complications, let's have a unique counter. m4_define([_AM_STAMP_Count], [0]) # _AM_STAMP(HEADER) # ----------------- # The name of the stamp file for HEADER. AC_DEFUN([_AM_STAMP], [m4_define([_AM_STAMP_Count], m4_incr(_AM_STAMP_Count))dnl AS_ESCAPE(_AM_DIRNAME(patsubst([$1], [:.*])))/stamp-h[]_AM_STAMP_Count]) # _AM_CONFIG_HEADER(HEADER[:SOURCES], COMMANDS, INIT-COMMANDS) # ------------------------------------------------------------ # We used to try to get a real timestamp in stamp-h. But the fear is that # that will cause unnecessary cvs conflicts. AC_DEFUN([_AM_CONFIG_HEADER], [# Add the stamp file to the list of files AC keeps track of, # along with our hook. AC_CONFIG_HEADERS([$1], [# update the timestamp echo 'timestamp for $1' >"_AM_STAMP([$1])" $2], [$3]) ])# _AM_CONFIG_HEADER # AM_CONFIG_HEADER(HEADER[:SOURCES]..., COMMANDS, INIT-COMMANDS) # -------------------------------------------------------------- AC_DEFUN([AM_CONFIG_HEADER], [AC_FOREACH([_AM_File], [$1], [_AM_CONFIG_HEADER(_AM_File, [$2], [$3])]) ])# AM_CONFIG_HEADER # isc-posix.m4 serial 1 (gettext-0.10.40) dnl Copyright (C) 1995-2002 Free Software Foundation, Inc. dnl This file is free software, distributed under the terms of the GNU dnl General Public License. As a special exception to the GNU General dnl Public License, this file may be distributed as part of a program dnl that contains a configuration script generated by Autoconf, under dnl the same distribution terms as the rest of that program. # This test replaces the one in autoconf. # Currently this macro should have the same name as the autoconf macro # because gettext's gettext.m4 (distributed in the automake package) # still uses it. Otherwise, the use in gettext.m4 makes autoheader # give these diagnostics: # configure.in:556: AC_TRY_COMPILE was called before AC_ISC_POSIX # configure.in:556: AC_TRY_RUN was called before AC_ISC_POSIX undefine([AC_ISC_POSIX]) AC_DEFUN([AC_ISC_POSIX], [ dnl This test replaces the obsolescent AC_ISC_POSIX kludge. AC_CHECK_LIB(cposix, strerror, [LIBS="$LIBS -lcposix"]) ] ) # Copyright 1996, 1998, 1999, 2000, 2001 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # serial 1 AC_DEFUN([AM_WITH_DMALLOC], [AC_MSG_CHECKING([if malloc debugging is wanted]) AC_ARG_WITH(dmalloc, [ --with-dmalloc use dmalloc, as in http://www.dmalloc.com/dmalloc.tar.gz], [if test "$withval" = yes; then AC_MSG_RESULT(yes) AC_DEFINE(WITH_DMALLOC,1, [Define if using the dmalloc debugging malloc package]) LIBS="$LIBS -ldmalloc" LDFLAGS="$LDFLAGS -g" else AC_MSG_RESULT(no) fi], [AC_MSG_RESULT(no)]) ]) qscan-1.2/config.h.in0000644000175000006270000001246107546762500010206 /* config.h.in. Generated from configure.ac by autoheader. */ /* return value of an overflowed snprintf */ #undef CONF_SNPRINTF_TYPE /* Define to one of `_getb67', `GETB67', `getb67' for Cray-2 and Cray-YMP systems. This function is required for `alloca.c' support on those systems. */ #undef CRAY_STACKSEG_END /* Define to 1 if using `alloca.c'. */ #undef C_ALLOCA /* Define to 1 if you have `alloca', as a function or macro. */ #undef HAVE_ALLOCA /* Define to 1 if you have and it should be used (not on Ultrix). */ #undef HAVE_ALLOCA_H /* Define to 1 if you have the header file, and it defines `DIR'. */ #undef HAVE_DIRENT_H /* Define to 1 if you don't have `vprintf' but do have `_doprnt.' */ #undef HAVE_DOPRNT /* Define to 1 if you have the header file. */ #undef HAVE_INTTYPES_H /* Define to 1 if you have the header file. */ #undef HAVE_MEMORY_H /* Define to 1 if you have the `nanosleep' function. */ #undef HAVE_NANOSLEEP /* Define to 1 if you have the header file, and it defines `DIR'. */ #undef HAVE_NDIR_H /* Define to 1 if you have the `snprintf' function. */ #undef HAVE_SNPRINTF /* Define to 1 if `stat' has the bug that it succeeds when given the zero-length file name argument. */ #undef HAVE_STAT_EMPTY_STRING_BUG /* Define to 1 if you have the header file. */ #undef HAVE_STDARG_H /* Define to 1 if you have the header file. */ #undef HAVE_STDDEF_H /* Define to 1 if you have the header file. */ #undef HAVE_STDINT_H /* Define to 1 if you have the header file. */ #undef HAVE_STDLIB_H /* Define to 1 if you have the header file. */ #undef HAVE_STRINGS_H /* Define to 1 if you have the header file. */ #undef HAVE_STRING_H /* Define to 1 if you have the header file, and it defines `DIR'. */ #undef HAVE_SYS_DIR_H /* Define to 1 if you have the header file, and it defines `DIR'. */ #undef HAVE_SYS_NDIR_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_PARAM_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_RESOURCE_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_STAT_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_TIME_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_TYPES_H /* Define to 1 if you have that is POSIX.1 compatible. */ #undef HAVE_SYS_WAIT_H /* Define to 1 if you have the header file. */ #undef HAVE_UNISTD_H /* Define to 1 if you have the `usleep' function. */ #undef HAVE_USLEEP /* Define to 1 if you have the header file. */ #undef HAVE_VARARGS_H /* Define to 1 if you have the `vfprintf' function. */ #undef HAVE_VFPRINTF /* Define to 1 if you have the `vprintf' function. */ #undef HAVE_VPRINTF /* Define to 1 if you have the `vsnprintf' function. */ #undef HAVE_VSNPRINTF /* Define to 1 if `lstat' dereferences a symlink specified with a trailing slash. */ #undef LSTAT_FOLLOWS_SLASHED_SYMLINK /* Name of package */ #undef PACKAGE /* Define to the address where bug reports for this package should be sent. */ #undef PACKAGE_BUGREPORT /* Define to the full name of this package. */ #undef PACKAGE_NAME /* Define to the full name and version of this package. */ #undef PACKAGE_STRING /* Define to the one symbol short name of this package. */ #undef PACKAGE_TARNAME /* Define to the version of this package. */ #undef PACKAGE_VERSION /* Define as the return type of signal handlers (`int' or `void'). */ #undef RETSIGTYPE /* max scanning concurrency */ #undef SCAN_CONCURRENCY /* If using the C implementation of alloca, define if you know the direction of stack growth for your system; otherwise it will be automatically deduced at run-time. STACK_DIRECTION > 0 => grows toward higher addresses STACK_DIRECTION < 0 => grows toward lower addresses STACK_DIRECTION = 0 => direction of growth unknown */ #undef STACK_DIRECTION /* Define to 1 if the `S_IS*' macros in do not work properly. */ #undef STAT_MACROS_BROKEN /* Define to 1 if you have the ANSI C header files. */ #undef STDC_HEADERS /* Define to 1 if you can safely include both and . */ #undef TIME_WITH_SYS_TIME /* Define to 1 if your declares `struct tm'. */ #undef TM_IN_SYS_TIME /* usleep returns an integer */ #undef USLEEP_RETURNS_INT /* Version number of package */ #undef VERSION /* Define if using the dmalloc debugging malloc package */ #undef WITH_DMALLOC /* Define to 1 if on AIX 3. System headers sometimes define this. We just want to avoid a redefinition error message. */ #ifndef _ALL_SOURCE # undef _ALL_SOURCE #endif /* Define to empty if `const' does not conform to ANSI C. */ #undef const /* Define to `int' if doesn't define. */ #undef gid_t /* Define as `__inline' if that's what the C compiler calls it, or to nothing if it is not supported. */ #undef inline /* Define to `int' if does not define. */ #undef mode_t /* Define to `int' if does not define. */ #undef pid_t /* Define to `unsigned' if does not define. */ #undef size_t /* ssize_t type */ #undef ssize_t /* Define to `int' if doesn't define. */ #undef uid_t qscan-1.2/configure0000755000175000006270000061753207546762443010112 #! /bin/sh # Guess values for system-dependent variables and create Makefiles. # Generated by GNU Autoconf 2.53a. # # Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002 # Free Software Foundation, Inc. # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. ## --------------------- ## ## M4sh Initialization. ## ## --------------------- ## # Be Bourne compatible if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then set -o posix fi # NLS nuisances. # Support unset when possible. if (FOO=FOO; unset FOO) >/dev/null 2>&1; then as_unset=unset else as_unset=false fi (set +x; test -n "`(LANG=C; export LANG) 2>&1`") && { $as_unset LANG || test "${LANG+set}" != set; } || { LANG=C; export LANG; } (set +x; test -n "`(LC_ALL=C; export LC_ALL) 2>&1`") && { $as_unset LC_ALL || test "${LC_ALL+set}" != set; } || { LC_ALL=C; export LC_ALL; } (set +x; test -n "`(LC_TIME=C; export LC_TIME) 2>&1`") && { $as_unset LC_TIME || test "${LC_TIME+set}" != set; } || { LC_TIME=C; export LC_TIME; } (set +x; test -n "`(LC_CTYPE=C; export LC_CTYPE) 2>&1`") && { $as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set; } || { LC_CTYPE=C; export LC_CTYPE; } (set +x; test -n "`(LANGUAGE=C; export LANGUAGE) 2>&1`") && { $as_unset LANGUAGE || test "${LANGUAGE+set}" != set; } || { LANGUAGE=C; export LANGUAGE; } (set +x; test -n "`(LC_COLLATE=C; export LC_COLLATE) 2>&1`") && { $as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set; } || { LC_COLLATE=C; export LC_COLLATE; } (set +x; test -n "`(LC_NUMERIC=C; export LC_NUMERIC) 2>&1`") && { $as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set; } || { LC_NUMERIC=C; export LC_NUMERIC; } (set +x; test -n "`(LC_MESSAGES=C; export LC_MESSAGES) 2>&1`") && { $as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set; } || { LC_MESSAGES=C; export LC_MESSAGES; } # Required to use basename. if expr a : '\(a\)' >/dev/null 2>&1; then as_expr=expr else as_expr=false fi if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi # Name of the executable. as_me=`$as_basename "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)$' \| \ . : '\(.\)' 2>/dev/null || echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } /^X\/\(\/\/\)$/{ s//\1/; q; } /^X\/\(\/\).*/{ s//\1/; q; } s/.*/./; q'` # PATH needs CR, and LINENO needs CR and PATH. # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then echo "#! /bin/sh" >conftest.sh echo "exit 0" >>conftest.sh chmod +x conftest.sh if (PATH=".;."; conftest.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi rm -f conftest.sh fi as_lineno_1=$LINENO as_lineno_2=$LINENO as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` test "x$as_lineno_1" != "x$as_lineno_2" && test "x$as_lineno_3" = "x$as_lineno_2" || { # Find who we are. Look in the path if we contain no path at all # relative or not. case $0 in *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 { (exit 1); exit 1; }; } fi case $CONFIG_SHELL in '') as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for as_base in sh bash ksh sh5; do case $as_dir in /*) if ("$as_dir/$as_base" -c ' as_lineno_1=$LINENO as_lineno_2=$LINENO as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` test "x$as_lineno_1" != "x$as_lineno_2" && test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } CONFIG_SHELL=$as_dir/$as_base export CONFIG_SHELL exec "$CONFIG_SHELL" "$0" ${1+"$@"} fi;; esac done done ;; esac # Create $as_me.lineno as a copy of $as_myself, but with $LINENO # uniformly replaced by the line number. The first 'sed' inserts a # line-number line before each line; the second 'sed' does the real # work. The second script uses 'N' to pair each line-number line # with the numbered line, and appends trailing '-' during # substitution so that $LINENO is not a special case at line end. # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) sed '=' <$as_myself | sed ' N s,$,-, : loop s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, t loop s,-$,, s,^['$as_cr_digits']*\n,, ' >$as_me.lineno && chmod +x $as_me.lineno || { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 { (exit 1); exit 1; }; } # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensible to this). . ./$as_me.lineno # Exit status is that of the last command. exit } case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in *c*,-n*) ECHO_N= ECHO_C=' ' ECHO_T=' ' ;; *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; *) ECHO_N= ECHO_C='\c' ECHO_T= ;; esac if expr a : '\(a\)' >/dev/null 2>&1; then as_expr=expr else as_expr=false fi rm -f conf$$ conf$$.exe conf$$.file echo >conf$$.file if ln -s conf$$.file conf$$ 2>/dev/null; then # We could just check for DJGPP; but this test a) works b) is more generic # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). if test -f conf$$.exe; then # Don't use ln at all; we don't have any links as_ln_s='cp -p' else as_ln_s='ln -s' fi elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -p' fi rm -f conf$$ conf$$.exe conf$$.file if mkdir -p . 2>/dev/null; then as_mkdir_p=: else as_mkdir_p=false fi as_executable_p="test -f" # Sed expression to map a string onto a valid CPP name. as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g" # Sed expression to map a string onto a valid variable name. as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g" # IFS # We need space, tab and new line, in precisely that order. as_nl=' ' IFS=" $as_nl" # CDPATH. $as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=$PATH_SEPARATOR; export CDPATH; } # Name of the host. # hostname on some systems (SVR3.2, Linux) returns a bogus exit status, # so uname gets run too. ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` exec 6>&1 # # Initializations. # ac_default_prefix=/usr/local cross_compiling=no subdirs= MFLAGS= MAKEFLAGS= SHELL=${CONFIG_SHELL-/bin/sh} # Maximum number of lines to put in a shell here document. # This variable seems obsolete. It should probably be removed, and # only ac_max_sed_lines should be used. : ${ac_max_here_lines=38} # Identity of this package. PACKAGE_NAME= PACKAGE_TARNAME= PACKAGE_VERSION= PACKAGE_STRING= PACKAGE_BUGREPORT= ac_unique_file="src/qscan.c" # Factoring default headers for most tests. ac_includes_default="\ #include #if HAVE_SYS_TYPES_H # include #endif #if HAVE_SYS_STAT_H # include #endif #if STDC_HEADERS # include # include #else # if HAVE_STDLIB_H # include # endif #endif #if HAVE_STRING_H # if !STDC_HEADERS && HAVE_MEMORY_H # include # endif # include #endif #if HAVE_STRINGS_H # include #endif #if HAVE_INTTYPES_H # include #else # if HAVE_STDINT_H # include # endif #endif #if HAVE_UNISTD_H # include #endif" # Initialize some variables set by options. ac_init_help= ac_init_version=false # The variables have the same names as the options, with # dashes changed to underlines. cache_file=/dev/null exec_prefix=NONE no_create= no_recursion= prefix=NONE program_prefix=NONE program_suffix=NONE program_transform_name=s,x,x, silent= site= srcdir= verbose= x_includes=NONE x_libraries=NONE # Installation directory options. # These are left unexpanded so users can "make install exec_prefix=/foo" # and all the variables that are supposed to be based on exec_prefix # by default will actually change. # Use braces instead of parens because sh, perl, etc. also accept them. bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' datadir='${prefix}/share' sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' libdir='${exec_prefix}/lib' includedir='${prefix}/include' oldincludedir='/usr/include' infodir='${prefix}/info' mandir='${prefix}/man' ac_prev= for ac_option do # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then eval "$ac_prev=\$ac_option" ac_prev= continue fi ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'` # Accept the important Cygnus configure options, so we can diagnose typos. case $ac_option in -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) bindir=$ac_optarg ;; -build | --build | --buil | --bui | --bu) ac_prev=build_alias ;; -build=* | --build=* | --buil=* | --bui=* | --bu=*) build_alias=$ac_optarg ;; -cache-file | --cache-file | --cache-fil | --cache-fi \ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ac_prev=cache_file ;; -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) cache_file=$ac_optarg ;; --config-cache | -C) cache_file=config.cache ;; -datadir | --datadir | --datadi | --datad | --data | --dat | --da) ac_prev=datadir ;; -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ | --da=*) datadir=$ac_optarg ;; -disable-* | --disable-*) ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid feature name: $ac_feature" >&2 { (exit 1); exit 1; }; } ac_feature=`echo $ac_feature | sed 's/-/_/g'` eval "enable_$ac_feature=no" ;; -enable-* | --enable-*) ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid feature name: $ac_feature" >&2 { (exit 1); exit 1; }; } ac_feature=`echo $ac_feature | sed 's/-/_/g'` case $ac_option in *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; *) ac_optarg=yes ;; esac eval "enable_$ac_feature='$ac_optarg'" ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ | --exec | --exe | --ex) ac_prev=exec_prefix ;; -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ | --exec=* | --exe=* | --ex=*) exec_prefix=$ac_optarg ;; -gas | --gas | --ga | --g) # Obsolete; use --with-gas. with_gas=yes ;; -help | --help | --hel | --he | -h) ac_init_help=long ;; -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) ac_init_help=recursive ;; -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) ac_init_help=short ;; -host | --host | --hos | --ho) ac_prev=host_alias ;; -host=* | --host=* | --hos=* | --ho=*) host_alias=$ac_optarg ;; -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ | --includ=* | --inclu=* | --incl=* | --inc=*) includedir=$ac_optarg ;; -infodir | --infodir | --infodi | --infod | --info | --inf) ac_prev=infodir ;; -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) infodir=$ac_optarg ;; -libdir | --libdir | --libdi | --libd) ac_prev=libdir ;; -libdir=* | --libdir=* | --libdi=* | --libd=*) libdir=$ac_optarg ;; -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ | --libexe | --libex | --libe) ac_prev=libexecdir ;; -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ | --libexe=* | --libex=* | --libe=*) libexecdir=$ac_optarg ;; -localstatedir | --localstatedir | --localstatedi | --localstated \ | --localstate | --localstat | --localsta | --localst \ | --locals | --local | --loca | --loc | --lo) ac_prev=localstatedir ;; -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ | --localstate=* | --localstat=* | --localsta=* | --localst=* \ | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) localstatedir=$ac_optarg ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ac_prev=mandir ;; -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) mandir=$ac_optarg ;; -nfp | --nfp | --nf) # Obsolete; use --without-fp. with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c | -n) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) no_recursion=yes ;; -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ | --oldin | --oldi | --old | --ol | --o) ac_prev=oldincludedir ;; -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) oldincludedir=$ac_optarg ;; -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ac_prev=prefix ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) prefix=$ac_optarg ;; -program-prefix | --program-prefix | --program-prefi | --program-pref \ | --program-pre | --program-pr | --program-p) ac_prev=program_prefix ;; -program-prefix=* | --program-prefix=* | --program-prefi=* \ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) program_prefix=$ac_optarg ;; -program-suffix | --program-suffix | --program-suffi | --program-suff \ | --program-suf | --program-su | --program-s) ac_prev=program_suffix ;; -program-suffix=* | --program-suffix=* | --program-suffi=* \ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) program_suffix=$ac_optarg ;; -program-transform-name | --program-transform-name \ | --program-transform-nam | --program-transform-na \ | --program-transform-n | --program-transform- \ | --program-transform | --program-transfor \ | --program-transfo | --program-transf \ | --program-trans | --program-tran \ | --progr-tra | --program-tr | --program-t) ac_prev=program_transform_name ;; -program-transform-name=* | --program-transform-name=* \ | --program-transform-nam=* | --program-transform-na=* \ | --program-transform-n=* | --program-transform-=* \ | --program-transform=* | --program-transfor=* \ | --program-transfo=* | --program-transf=* \ | --program-trans=* | --program-tran=* \ | --progr-tra=* | --program-tr=* | --program-t=*) program_transform_name=$ac_optarg ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ | --sbi=* | --sb=*) sbindir=$ac_optarg ;; -sharedstatedir | --sharedstatedir | --sharedstatedi \ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ | --sharedst | --shareds | --shared | --share | --shar \ | --sha | --sh) ac_prev=sharedstatedir ;; -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ | --sha=* | --sh=*) sharedstatedir=$ac_optarg ;; -site | --site | --sit) ac_prev=site ;; -site=* | --site=* | --sit=*) site=$ac_optarg ;; -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) srcdir=$ac_optarg ;; -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ | --syscon | --sysco | --sysc | --sys | --sy) ac_prev=sysconfdir ;; -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) sysconfdir=$ac_optarg ;; -target | --target | --targe | --targ | --tar | --ta | --t) ac_prev=target_alias ;; -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) target_alias=$ac_optarg ;; -v | -verbose | --verbose | --verbos | --verbo | --verb) verbose=yes ;; -version | --version | --versio | --versi | --vers | -V) ac_init_version=: ;; -with-* | --with-*) ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid package name: $ac_package" >&2 { (exit 1); exit 1; }; } ac_package=`echo $ac_package| sed 's/-/_/g'` case $ac_option in *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; *) ac_optarg=yes ;; esac eval "with_$ac_package='$ac_optarg'" ;; -without-* | --without-*) ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid package name: $ac_package" >&2 { (exit 1); exit 1; }; } ac_package=`echo $ac_package | sed 's/-/_/g'` eval "with_$ac_package=no" ;; --x) # Obsolete; use --with-x. with_x=yes ;; -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ | --x-incl | --x-inc | --x-in | --x-i) ac_prev=x_includes ;; -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) x_includes=$ac_optarg ;; -x-libraries | --x-libraries | --x-librarie | --x-librari \ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ac_prev=x_libraries ;; -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries=$ac_optarg ;; -*) { echo "$as_me: error: unrecognized option: $ac_option Try \`$0 --help' for more information." >&2 { (exit 1); exit 1; }; } ;; *=*) ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` # Reject names that are not valid shell variable names. expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 { (exit 1); exit 1; }; } ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` eval "$ac_envvar='$ac_optarg'" export $ac_envvar ;; *) # FIXME: should be removed in autoconf 3.0. echo "$as_me: WARNING: you should use --build, --host, --target" >&2 expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && echo "$as_me: WARNING: invalid host type: $ac_option" >&2 : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} ;; esac done if test -n "$ac_prev"; then ac_option=--`echo $ac_prev | sed 's/_/-/g'` { echo "$as_me: error: missing argument to $ac_option" >&2 { (exit 1); exit 1; }; } fi # Be sure to have absolute paths. for ac_var in exec_prefix prefix do eval ac_val=$`echo $ac_var` case $ac_val in [\\/$]* | ?:[\\/]* | NONE | '' ) ;; *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 { (exit 1); exit 1; }; };; esac done # Be sure to have absolute paths. for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ localstatedir libdir includedir oldincludedir infodir mandir do eval ac_val=$`echo $ac_var` case $ac_val in [\\/$]* | ?:[\\/]* ) ;; *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 { (exit 1); exit 1; }; };; esac done # There might be people who depend on the old broken behavior: `$host' # used to hold the argument of --host etc. # FIXME: To remove some day. build=$build_alias host=$host_alias target=$target_alias # FIXME: To remove some day. if test "x$host_alias" != x; then if test "x$build_alias" = x; then cross_compiling=maybe echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used." >&2 elif test "x$build_alias" != "x$host_alias"; then cross_compiling=yes fi fi ac_tool_prefix= test -n "$host_alias" && ac_tool_prefix=$host_alias- test "$silent" = yes && exec 6>/dev/null # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then its parent. ac_confdir=`(dirname "$0") 2>/dev/null || $as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$0" : 'X\(//\)[^/]' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$0" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` srcdir=$ac_confdir if test ! -r $srcdir/$ac_unique_file; then srcdir=.. fi else ac_srcdir_defaulted=no fi if test ! -r $srcdir/$ac_unique_file; then if test "$ac_srcdir_defaulted" = yes; then { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 { (exit 1); exit 1; }; } else { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 { (exit 1); exit 1; }; } fi fi srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` ac_env_build_alias_set=${build_alias+set} ac_env_build_alias_value=$build_alias ac_cv_env_build_alias_set=${build_alias+set} ac_cv_env_build_alias_value=$build_alias ac_env_host_alias_set=${host_alias+set} ac_env_host_alias_value=$host_alias ac_cv_env_host_alias_set=${host_alias+set} ac_cv_env_host_alias_value=$host_alias ac_env_target_alias_set=${target_alias+set} ac_env_target_alias_value=$target_alias ac_cv_env_target_alias_set=${target_alias+set} ac_cv_env_target_alias_value=$target_alias ac_env_CC_set=${CC+set} ac_env_CC_value=$CC ac_cv_env_CC_set=${CC+set} ac_cv_env_CC_value=$CC ac_env_CFLAGS_set=${CFLAGS+set} ac_env_CFLAGS_value=$CFLAGS ac_cv_env_CFLAGS_set=${CFLAGS+set} ac_cv_env_CFLAGS_value=$CFLAGS ac_env_LDFLAGS_set=${LDFLAGS+set} ac_env_LDFLAGS_value=$LDFLAGS ac_cv_env_LDFLAGS_set=${LDFLAGS+set} ac_cv_env_LDFLAGS_value=$LDFLAGS ac_env_CPPFLAGS_set=${CPPFLAGS+set} ac_env_CPPFLAGS_value=$CPPFLAGS ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} ac_cv_env_CPPFLAGS_value=$CPPFLAGS ac_env_CPP_set=${CPP+set} ac_env_CPP_value=$CPP ac_cv_env_CPP_set=${CPP+set} ac_cv_env_CPP_value=$CPP ac_env_SWEEP_set=${SWEEP+set} ac_env_SWEEP_value=$SWEEP ac_cv_env_SWEEP_set=${SWEEP+set} ac_cv_env_SWEEP_value=$SWEEP ac_env_RIPMIME_set=${RIPMIME+set} ac_env_RIPMIME_value=$RIPMIME ac_cv_env_RIPMIME_set=${RIPMIME+set} ac_cv_env_RIPMIME_value=$RIPMIME ac_env_QMAIL_QUEUE_set=${QMAIL_QUEUE+set} ac_env_QMAIL_QUEUE_value=$QMAIL_QUEUE ac_cv_env_QMAIL_QUEUE_set=${QMAIL_QUEUE+set} ac_cv_env_QMAIL_QUEUE_value=$QMAIL_QUEUE # # Report the --help message. # if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF \`configure' configures this package to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... To assign environment variables (e.g., CC, CFLAGS...), specify them as VAR=VALUE. See below for descriptions of some of the useful variables. Defaults for the options are specified in brackets. Configuration: -h, --help display this help and exit --help=short display options specific to this package --help=recursive display the short help of all the included packages -V, --version display version information and exit -q, --quiet, --silent do not print \`checking...' messages --cache-file=FILE cache test results in FILE [disabled] -C, --config-cache alias for \`--cache-file=config.cache' -n, --no-create do not create output files --srcdir=DIR find the sources in DIR [configure dir or \`..'] _ACEOF cat <<_ACEOF Installation directories: --prefix=PREFIX install architecture-independent files in PREFIX [$ac_default_prefix] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX [PREFIX] By default, \`make install' will install all the files in \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify an installation prefix other than \`$ac_default_prefix' using \`--prefix', for instance \`--prefix=\$HOME'. For better control, use the options below. Fine tuning of the installation directories: --bindir=DIR user executables [EPREFIX/bin] --sbindir=DIR system admin executables [EPREFIX/sbin] --libexecdir=DIR program executables [EPREFIX/libexec] --datadir=DIR read-only architecture-independent data [PREFIX/share] --sysconfdir=DIR read-only single-machine data [PREFIX/etc] --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] --localstatedir=DIR modifiable single-machine data [PREFIX/var] --libdir=DIR object code libraries [EPREFIX/lib] --includedir=DIR C header files [PREFIX/include] --oldincludedir=DIR C header files for non-gcc [/usr/include] --infodir=DIR info documentation [PREFIX/info] --mandir=DIR man documentation [PREFIX/man] _ACEOF cat <<\_ACEOF Program names: --program-prefix=PREFIX prepend PREFIX to installed program names --program-suffix=SUFFIX append SUFFIX to installed program names --program-transform-name=PROGRAM run sed PROGRAM on installed program names _ACEOF fi if test -n "$ac_init_help"; then cat <<\_ACEOF Optional Features: --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] --disable-dependency-tracking Speeds up one-time builds --enable-dependency-tracking Do not reject slow dependency extractors Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) --with-dmalloc use dmalloc, as in http://www.dmalloc.com/dmalloc.tar.gz --with-concurrency Set max virus scanning concurrency Some influential environment variables: CC C compiler command CFLAGS C compiler flags LDFLAGS linker flags, e.g. -L if you have libraries in a nonstandard directory CPPFLAGS C/C++ preprocessor flags, e.g. -I if you have headers in a nonstandard directory CPP C preprocessor SWEEP local path to the Sophos antivirus RIPMIME local path to the the ripmime executable QMAIL_QUEUE local path to the original qmail-queue program Use these variables to override the choices made by `configure' or to help it to find libraries and programs with nonstandard names/locations. _ACEOF fi if test "$ac_init_help" = "recursive"; then # If there are subdirs, report their specific --help. ac_popdir=`pwd` for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue test -d $ac_dir || continue ac_builddir=. if test "$ac_dir" != .; then ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` # A "../" for each directory in $ac_dir_suffix. ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` else ac_dir_suffix= ac_top_builddir= fi case $srcdir in .) # No --srcdir option. We are building in place. ac_srcdir=. if test -z "$ac_top_builddir"; then ac_top_srcdir=. else ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` fi ;; [\\/]* | ?:[\\/]* ) # Absolute path. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ;; *) # Relative path. ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_builddir$srcdir ;; esac # Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be # absolute. ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd` ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` cd $ac_dir # Check for guested configure; otherwise get Cygnus style configure. if test -f $ac_srcdir/configure.gnu; then echo $SHELL $ac_srcdir/configure.gnu --help=recursive elif test -f $ac_srcdir/configure; then echo $SHELL $ac_srcdir/configure --help=recursive elif test -f $ac_srcdir/configure.ac || test -f $ac_srcdir/configure.in; then echo $ac_configure --help else echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 fi cd $ac_popdir done fi test -n "$ac_init_help" && exit 0 if $ac_init_version; then cat <<\_ACEOF Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. _ACEOF exit 0 fi exec 5>config.log cat >&5 <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by $as_me, which was generated by GNU Autoconf 2.53a. Invocation command line was $ $0 $@ _ACEOF { cat <<_ASUNAME ## --------- ## ## Platform. ## ## --------- ## hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` uname -m = `(uname -m) 2>/dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` /bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` hostinfo = `(hostinfo) 2>/dev/null || echo unknown` /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` _ASUNAME as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. echo "PATH: $as_dir" done } >&5 cat >&5 <<_ACEOF ## ----------- ## ## Core tests. ## ## ----------- ## _ACEOF # Keep a trace of the command line. # Strip out --no-create and --no-recursion so they do not pile up. # Also quote any args containing shell meta-characters. ac_configure_args= ac_sep= for ac_arg do case $ac_arg in -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c | -n ) continue ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) continue ;; *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac case " $ac_configure_args " in *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. *) ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" ac_sep=" " ;; esac # Get rid of the leading space. done # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there # would cause problems or look ugly. # WARNING: Be sure not to use single quotes in there, as some shells, # such as our DU 5.0 friend, will then `close' the trap. trap 'exit_status=$? # Save into config.log some information that might help in debugging. { echo cat <<\_ASBOX ## ---------------- ## ## Cache variables. ## ## ---------------- ## _ASBOX echo # The following way of writing the cache mishandles newlines in values, { (set) 2>&1 | case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in *ac_space=\ *) sed -n \ "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" ;; *) sed -n \ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" ;; esac; } echo if test -s confdefs.h; then cat <<\_ASBOX ## ----------- ## ## confdefs.h. ## ## ----------- ## _ASBOX echo sed "/^$/d" confdefs.h echo fi test "$ac_signal" != 0 && echo "$as_me: caught signal $ac_signal" echo "$as_me: exit $exit_status" } >&5 rm -f core core.* *.core && rm -rf conftest* confdefs* conf$$* $ac_clean_files && exit $exit_status ' 0 for ac_signal in 1 2 13 15; do trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal done ac_signal=0 # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -rf conftest* confdefs.h # AIX cpp loses on an empty file, so make sure it contains at least a newline. echo >confdefs.h # Predefined preprocessor variables. cat >>confdefs.h <<_ACEOF #define PACKAGE_NAME "$PACKAGE_NAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_TARNAME "$PACKAGE_TARNAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_VERSION "$PACKAGE_VERSION" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_STRING "$PACKAGE_STRING" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" _ACEOF # Let the site file select an alternate cache file if it wants to. # Prefer explicitly selected file to automatically selected ones. if test -z "$CONFIG_SITE"; then if test "x$prefix" != xNONE; then CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" else CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" fi fi for ac_site_file in $CONFIG_SITE; do if test -r "$ac_site_file"; then { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 echo "$as_me: loading site script $ac_site_file" >&6;} sed 's/^/| /' "$ac_site_file" >&5 . "$ac_site_file" fi done if test -r "$cache_file"; then # Some versions of bash will fail to source /dev/null (special # files actually), so we avoid doing that. if test -f "$cache_file"; then { echo "$as_me:$LINENO: loading cache $cache_file" >&5 echo "$as_me: loading cache $cache_file" >&6;} case $cache_file in [\\/]* | ?:[\\/]* ) . $cache_file;; *) . ./$cache_file;; esac fi else { echo "$as_me:$LINENO: creating cache $cache_file" >&5 echo "$as_me: creating cache $cache_file" >&6;} >$cache_file fi # Check that the precious variables saved in the cache have kept the same # value. ac_cache_corrupted=false for ac_var in `(set) 2>&1 | sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do eval ac_old_set=\$ac_cv_env_${ac_var}_set eval ac_new_set=\$ac_env_${ac_var}_set eval ac_old_val="\$ac_cv_env_${ac_var}_value" eval ac_new_val="\$ac_env_${ac_var}_value" case $ac_old_set,$ac_new_set in set,) { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ac_cache_corrupted=: ;; ,set) { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ac_cache_corrupted=: ;; ,);; *) if test "x$ac_old_val" != "x$ac_new_val"; then { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 echo "$as_me: former value: $ac_old_val" >&2;} { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 echo "$as_me: current value: $ac_new_val" >&2;} ac_cache_corrupted=: fi;; esac # Pass precious variables to config.status. if test "$ac_new_set" = set; then case $ac_new_val in *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; *) ac_arg=$ac_var=$ac_new_val ;; esac case " $ac_configure_args " in *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; esac fi done if $ac_cache_corrupted; then { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 echo "$as_me: error: changes in the environment can compromise the build" >&2;} { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} { (exit 1); exit 1; }; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu am__api_version="1.6" ac_aux_dir= for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do if test -f $ac_dir/install-sh; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install-sh -c" break elif test -f $ac_dir/install.sh; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install.sh -c" break elif test -f $ac_dir/shtool; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/shtool install -c" break fi done if test -z "$ac_aux_dir"; then { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5 echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;} { (exit 1); exit 1; }; } fi ac_config_guess="$SHELL $ac_aux_dir/config.guess" ac_config_sub="$SHELL $ac_aux_dir/config.sub" ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: # SysV /etc/install, /usr/sbin/install # SunOS /usr/etc/install # IRIX /sbin/install # AIX /bin/install # AmigaOS /C/install, which installs bootblocks on floppy discs # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 if test -z "$INSTALL"; then if test "${ac_cv_path_install+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. # Account for people who put trailing slashes in PATH elements. case $as_dir/ in ./ | .// | /cC/* | \ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ /usr/ucb/* ) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. # Don't use installbsd from OSF since it installs stuff as root # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then if test $ac_prog = install && grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. : elif test $ac_prog = install && grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # program-specific install script used by HP pwplus--don't use. : else ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" break 3 fi fi done done ;; esac done fi if test "${ac_cv_path_install+set}" = set; then INSTALL=$ac_cv_path_install else # As a last resort, use the slow shell script. We don't cache a # path for INSTALL within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the path is relative. INSTALL=$ac_install_sh fi fi echo "$as_me:$LINENO: result: $INSTALL" >&5 echo "${ECHO_T}$INSTALL" >&6 # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' echo "$as_me:$LINENO: checking whether build environment is sane" >&5 echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6 # Just in case sleep 1 echo timestamp > conftest.file # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` if test "$*" = "X"; then # -L didn't work. set X `ls -t $srcdir/configure conftest.file` fi rm -f conftest.file if test "$*" != "X $srcdir/configure conftest.file" \ && test "$*" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken alias in your environment" >&5 echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken alias in your environment" >&2;} { (exit 1); exit 1; }; } fi test "$2" = conftest.file ) then # Ok. : else { { echo "$as_me:$LINENO: error: newly created file is older than distributed files! Check your system clock" >&5 echo "$as_me: error: newly created file is older than distributed files! Check your system clock" >&2;} { (exit 1); exit 1; }; } fi echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6 test "$program_prefix" != NONE && program_transform_name="s,^,$program_prefix,;$program_transform_name" # Use a double $ so make ignores it. test "$program_suffix" != NONE && program_transform_name="s,\$,$program_suffix,;$program_transform_name" # Double any \ or $. echo might interpret backslashes. # By default was `s,x,x', remove it if useless. cat <<\_ACEOF >conftest.sed s/[\\$]/&&/g;s/;s,x,x,$// _ACEOF program_transform_name=`echo $program_transform_name | sed -f conftest.sed` rm conftest.sed # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" # Use eval to expand $SHELL if eval "$MISSING --run true"; then am_missing_run="$MISSING --run " else am_missing_run= { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} fi for ac_prog in gawk mawk nawk awk do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_AWK+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$AWK"; then ac_cv_prog_AWK="$AWK" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_AWK="$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi AWK=$ac_cv_prog_AWK if test -n "$AWK"; then echo "$as_me:$LINENO: result: $AWK" >&5 echo "${ECHO_T}$AWK" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi test -n "$AWK" && break done echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \${MAKE}" >&5 echo $ECHO_N "checking whether ${MAKE-make} sets \${MAKE}... $ECHO_C" >&6 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,./+-,__p_,'` if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.make <<\_ACEOF all: @echo 'ac_maketemp="${MAKE}"' _ACEOF # GNU make sometimes prints "make[1]: Entering...", which would confuse us. eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` if test -n "$ac_maketemp"; then eval ac_cv_prog_make_${ac_make}_set=yes else eval ac_cv_prog_make_${ac_make}_set=no fi rm -f conftest.make fi if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6 SET_MAKE= else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 SET_MAKE="MAKE=${MAKE-make}" fi # test to see if srcdir already configured if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} { (exit 1); exit 1; }; } fi # Define the identity of the package. PACKAGE=qscan VERSION=1.2 cat >>confdefs.h <<_ACEOF #define PACKAGE "$PACKAGE" _ACEOF cat >>confdefs.h <<_ACEOF #define VERSION "$VERSION" _ACEOF # Some tools Automake needs. ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} AMTAR=${AMTAR-"${am_missing_run}tar"} install_sh=${install_sh-"$am_aux_dir/install-sh"} # Installed binaries are usually stripped using `strip' when the user # run `make install-strip'. However `strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the `STRIP' environment variable to overrule this program. if test "$cross_compiling" != no; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_STRIP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then echo "$as_me:$LINENO: result: $STRIP" >&5 echo "${ECHO_T}$STRIP" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi fi if test -z "$ac_cv_prog_STRIP"; then ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ct_STRIP"; then ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_STRIP="strip" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 echo "${ECHO_T}$ac_ct_STRIP" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi STRIP=$ac_ct_STRIP else STRIP="$ac_cv_prog_STRIP" fi fi INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" # We need awk for the "check" target. The system "awk" is bad on # some platforms. # Add the stamp file to the list of files AC keeps track of, # along with our hook. ac_config_headers="$ac_config_headers config.h" ISODATE=`date +%Y-%m-%d` # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: # SysV /etc/install, /usr/sbin/install # SunOS /usr/etc/install # IRIX /sbin/install # AIX /bin/install # AmigaOS /C/install, which installs bootblocks on floppy discs # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 if test -z "$INSTALL"; then if test "${ac_cv_path_install+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. # Account for people who put trailing slashes in PATH elements. case $as_dir/ in ./ | .// | /cC/* | \ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ /usr/ucb/* ) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. # Don't use installbsd from OSF since it installs stuff as root # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then if test $ac_prog = install && grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. : elif test $ac_prog = install && grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # program-specific install script used by HP pwplus--don't use. : else ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" break 3 fi fi done done ;; esac done fi if test "${ac_cv_path_install+set}" = set; then INSTALL=$ac_cv_path_install else # As a last resort, use the slow shell script. We don't cache a # path for INSTALL within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the path is relative. INSTALL=$ac_install_sh fi fi echo "$as_me:$LINENO: result: $INSTALL" >&5 echo "${ECHO_T}$INSTALL" >&6 # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}gcc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then echo "$as_me:$LINENO: result: $CC" >&5 echo "${ECHO_T}$CC" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_ac_ct_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="gcc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 echo "${ECHO_T}$ac_ct_CC" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi CC=$ac_ct_CC else CC="$ac_cv_prog_CC" fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}cc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then echo "$as_me:$LINENO: result: $CC" >&5 echo "${ECHO_T}$CC" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_ac_ct_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="cc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 echo "${ECHO_T}$ac_ct_CC" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi CC=$ac_ct_CC else CC="$ac_cv_prog_CC" fi fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else ac_prog_rejected=no as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift if test $# != 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" fi fi fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then echo "$as_me:$LINENO: result: $CC" >&5 echo "${ECHO_T}$CC" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then for ac_prog in cl do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then echo "$as_me:$LINENO: result: $CC" >&5 echo "${ECHO_T}$CC" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi test -n "$CC" && break done fi if test -z "$CC"; then ac_ct_CC=$CC for ac_prog in cl do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_ac_ct_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 echo "${ECHO_T}$ac_ct_CC" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi test -n "$ac_ct_CC" && break done CC=$ac_ct_CC fi fi test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH" >&5 echo "$as_me: error: no acceptable C compiler found in \$PATH" >&2;} { (exit 1); exit 1; }; } # Provide some information about the compiler. echo "$as_me:$LINENO:" \ "checking for C compiler version" >&5 ac_compiler=`set X $ac_compile; echo $2` { (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 (eval $ac_compiler --version &5) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 (eval $ac_compiler -v &5) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 (eval $ac_compiler -V &5) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif int main () { ; return 0; } _ACEOF ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files a.out a.exe" # Try to create an executable without -o first, disregard a.out. # It will help us diagnose broken compilers, and finding out an intuition # of exeext. echo "$as_me:$LINENO: checking for C compiler default output" >&5 echo $ECHO_N "checking for C compiler default output... $ECHO_C" >&6 ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 (eval $ac_link_default) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then # Find the output, starting from the most likely. This scheme is # not robust to junk in `.', hence go to wildcards (a.*) only as a last # resort. # Be careful to initialize this variable, since it used to be cached. # Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. ac_cv_exeext= for ac_file in `ls a_out.exe a.exe conftest.exe 2>/dev/null; ls a.out conftest 2>/dev/null; ls a.* conftest.* 2>/dev/null`; do case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; a.out ) # We found the default executable, but exeext='' is most # certainly right. break;; *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` # FIXME: I believe we export ac_cv_exeext for Libtool --akim. export ac_cv_exeext break;; * ) break;; esac done else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 { { echo "$as_me:$LINENO: error: C compiler cannot create executables" >&5 echo "$as_me: error: C compiler cannot create executables" >&2;} { (exit 77); exit 77; }; } fi ac_exeext=$ac_cv_exeext echo "$as_me:$LINENO: result: $ac_file" >&5 echo "${ECHO_T}$ac_file" >&6 # Check the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. echo "$as_me:$LINENO: checking whether the C compiler works" >&5 echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6 # FIXME: These cross compiler hacks should be removed for Autoconf 3.0 # If not cross compiling, check that we can run a simple program. if test "$cross_compiling" != yes; then if { ac_try='./$ac_file' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then cross_compiling=no else if test "$cross_compiling" = maybe; then cross_compiling=yes else { { echo "$as_me:$LINENO: error: cannot run C compiled programs. If you meant to cross compile, use \`--host'." >&5 echo "$as_me: error: cannot run C compiled programs. If you meant to cross compile, use \`--host'." >&2;} { (exit 1); exit 1; }; } fi fi fi echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6 rm -f a.out a.exe conftest$ac_cv_exeext ac_clean_files=$ac_clean_files_save # Check the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 echo "$as_me:$LINENO: result: $cross_compiling" >&5 echo "${ECHO_T}$cross_compiling" >&6 echo "$as_me:$LINENO: checking for suffix of executables" >&5 echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then # If both `conftest.exe' and `conftest' are `present' (well, observable) # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will # work properly (i.e., refer to `conftest.exe'), while it won't with # `rm'. for ac_file in `(ls conftest.exe; ls conftest; ls conftest.*) 2>/dev/null`; do case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` export ac_cv_exeext break;; * ) break;; esac done else { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link" >&5 echo "$as_me: error: cannot compute suffix of executables: cannot compile and link" >&2;} { (exit 1); exit 1; }; } fi rm -f conftest$ac_cv_exeext echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 echo "${ECHO_T}$ac_cv_exeext" >&6 rm -f conftest.$ac_ext EXEEXT=$ac_cv_exeext ac_exeext=$EXEEXT echo "$as_me:$LINENO: checking for suffix of object files" >&5 echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 if test "${ac_cv_objext+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif int main () { ; return 0; } _ACEOF rm -f conftest.o conftest.obj if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` break;; esac done else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 { { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile" >&5 echo "$as_me: error: cannot compute suffix of object files: cannot compile" >&2;} { (exit 1); exit 1; }; } fi rm -f conftest.$ac_cv_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 echo "${ECHO_T}$ac_cv_objext" >&6 OBJEXT=$ac_cv_objext ac_objext=$OBJEXT echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 if test "${ac_cv_c_compiler_gnu+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif int main () { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_compiler_gnu=yes else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_compiler_gnu=no fi rm -f conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 GCC=`test $ac_compiler_gnu = yes && echo yes` ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS CFLAGS="-g" echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 if test "${ac_cv_prog_cc_g+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_prog_cc_g=yes else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_cv_prog_cc_g=no fi rm -f conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then if test "$GCC" = yes; then CFLAGS="-g -O2" else CFLAGS="-g" fi else if test "$GCC" = yes; then CFLAGS="-O2" else CFLAGS= fi fi echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 if test "${ac_cv_prog_cc_stdc+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_cv_prog_cc_stdc=no ac_save_CC=$CC cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #include #include #include #include /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ struct buf { int x; }; FILE * (*rcsopen) (struct buf *, struct stat *, int); static char *e (p, i) char **p; int i; { return p[i]; } static char *f (char * (*g) (char **, int), char **p, ...) { char *s; va_list v; va_start (v,p); s = g (p, va_arg (v,int)); va_end (v); return s; } int test (int i, double x); struct s1 {int (*f) (int a);}; struct s2 {int (*f) (double a);}; int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); int argc; char **argv; #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif int main () { return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; ; return 0; } _ACEOF # Don't try gcc -ansi; that turns off useful extensions and # breaks some systems' header files. # AIX -qlanglvl=ansi # Ultrix and OSF/1 -std1 # HP-UX 10.20 and later -Ae # HP-UX older versions -Aa -D_HPUX_SOURCE # SVR4 -Xc -D__EXTENSIONS__ for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_prog_cc_stdc=$ac_arg break else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest.$ac_objext done rm -f conftest.$ac_ext conftest.$ac_objext CC=$ac_save_CC fi case "x$ac_cv_prog_cc_stdc" in x|xno) echo "$as_me:$LINENO: result: none needed" >&5 echo "${ECHO_T}none needed" >&6 ;; *) echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 CC="$CC $ac_cv_prog_cc_stdc" ;; esac # Some people use a C++ compiler to compile C. Since we use `exit', # in C++ we need to declare it. In case someone uses the same compiler # for both compiling C and C++ we need to have the C++ compiler decide # the declaration of exit, since it's the most demanding environment. cat >conftest.$ac_ext <<_ACEOF #ifndef __cplusplus choke me #endif _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then for ac_declaration in \ ''\ '#include ' \ 'extern "C" void std::exit (int) throw (); using std::exit;' \ 'extern "C" void std::exit (int); using std::exit;' \ 'extern "C" void exit (int) throw ();' \ 'extern "C" void exit (int);' \ 'void exit (int);' do cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #include $ac_declaration #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif int main () { exit (42); ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then : else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 continue fi rm -f conftest.$ac_objext conftest.$ac_ext cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" $ac_declaration #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif int main () { exit (42); ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then break else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest.$ac_objext conftest.$ac_ext done rm -f conftest* if test -n "$ac_declaration"; then echo '#ifdef __cplusplus' >>confdefs.h echo $ac_declaration >>confdefs.h echo '#endif' >>confdefs.h fi else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest.$ac_objext conftest.$ac_ext ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu rm -f .deps 2>/dev/null mkdir .deps 2>/dev/null if test -d .deps; then DEPDIR=.deps else # MS-DOS does not allow filenames that begin with a dot. DEPDIR=_deps fi rmdir .deps 2>/dev/null ac_config_commands="$ac_config_commands depfiles" am_make=${MAKE-make} cat > confinc << 'END' doit: @echo done END # If we don't find an include directive, just comment out the code. echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6 am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf # We grep out `Entering directory' and `Leaving directory' # messages which can occur if `w' ends up in MAKEFLAGS. # In particular we don't look at `^make:' because GNU make might # be invoked under some other name (usually "gmake"), in which # case it prints its new name instead of `make'. if test "`$am_make -s -f confmf 2> /dev/null | fgrep -v 'ing directory'`" = "done"; then am__include=include am__quote= _am_result=GNU fi # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then am__include=.include am__quote="\"" _am_result=BSD fi fi echo "$as_me:$LINENO: result: $_am_result" >&5 echo "${ECHO_T}$_am_result" >&6 rm -f confinc confmf # Check whether --enable-dependency-tracking or --disable-dependency-tracking was given. if test "${enable_dependency_tracking+set}" = set; then enableval="$enable_dependency_tracking" fi; if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' fi if test "x$enable_dependency_tracking" != xno; then AMDEP_TRUE= AMDEP_FALSE='#' else AMDEP_TRUE='#' AMDEP_FALSE= fi depcc="$CC" am_compiler_list= echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6 if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named `D' -- because `-MD' means `put the output # in D'. mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir am_cv_CC_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi for depmode in $am_compiler_list; do # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. echo '#include "conftest.h"' > conftest.c echo 'int i;' > conftest.h echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf case $depmode in nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; none) break ;; esac # We check with `-c' and `-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle `-M -o', and we need to detect this. if depmode=$depmode \ source=conftest.c object=conftest.o \ depfile=conftest.Po tmpdepfile=conftest.TPo \ $SHELL ./depcomp $depcc -c conftest.c -o conftest.o >/dev/null 2>&1 && grep conftest.h conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then am_cv_CC_dependencies_compiler_type=$depmode break fi done cd .. rm -rf conftest.dir else am_cv_CC_dependencies_compiler_type=none fi fi echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6 CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= fi if test -z "$CPP"; then if test "${ac_cv_prog_CPP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else # Double quotes because CPP needs to be expanded for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" do ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #include Syntax error _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? egrep -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag else ac_cpp_err= fi else ac_cpp_err=yes fi if test -z "$ac_cpp_err"; then : else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 # Broken: fails on valid input. continue fi rm -f conftest.err conftest.$ac_ext # OK, works on sane cases. Now check whether non-existent headers # can be detected and how. cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #include _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? egrep -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag else ac_cpp_err= fi else ac_cpp_err=yes fi if test -z "$ac_cpp_err"; then # Broken: success on invalid input. continue else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.err conftest.$ac_ext if $ac_preproc_ok; then break fi done ac_cv_prog_CPP=$CPP fi CPP=$ac_cv_prog_CPP else ac_cv_prog_CPP=$CPP fi echo "$as_me:$LINENO: result: $CPP" >&5 echo "${ECHO_T}$CPP" >&6 ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #include Syntax error _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? egrep -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag else ac_cpp_err= fi else ac_cpp_err=yes fi if test -z "$ac_cpp_err"; then : else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 # Broken: fails on valid input. continue fi rm -f conftest.err conftest.$ac_ext # OK, works on sane cases. Now check whether non-existent headers # can be detected and how. cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #include _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? egrep -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag else ac_cpp_err= fi else ac_cpp_err=yes fi if test -z "$ac_cpp_err"; then # Broken: success on invalid input. continue else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.err conftest.$ac_ext if $ac_preproc_ok; then : else { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check" >&5 echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check" >&2;} { (exit 1); exit 1; }; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu echo "$as_me:$LINENO: checking for AIX" >&5 echo $ECHO_N "checking for AIX... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #ifdef _AIX yes #endif _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | egrep "yes" >/dev/null 2>&1; then echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6 cat >>confdefs.h <<\_ACEOF #define _ALL_SOURCE 1 _ACEOF else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi rm -f conftest* echo "$as_me:$LINENO: checking for strerror in -lcposix" >&5 echo $ECHO_N "checking for strerror in -lcposix... $ECHO_C" >&6 if test "${ac_cv_lib_cposix_strerror+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lcposix $LIBS" cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char strerror (); #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif int main () { strerror (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_lib_cposix_strerror=yes else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_cv_lib_cposix_strerror=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi echo "$as_me:$LINENO: result: $ac_cv_lib_cposix_strerror" >&5 echo "${ECHO_T}$ac_cv_lib_cposix_strerror" >&6 if test $ac_cv_lib_cposix_strerror = yes; then LIBS="$LIBS -lcposix" fi sweep_possible_path="/var/qmail/bin:/usr/bin:/usr/local/bin:/bin:/opt/sav/bin:/usr/local/sav/bin" # Extract the first word of "sweep", so it can be a program name with args. set dummy sweep; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_path_SWEEP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else case $SWEEP in [\\/]* | ?:[\\/]*) ac_cv_path_SWEEP="$SWEEP" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $sweep_possible_path do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_SWEEP="$as_dir/$ac_word$ac_exec_ext" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done ;; esac fi SWEEP=$ac_cv_path_SWEEP if test -n "$SWEEP"; then echo "$as_me:$LINENO: result: $SWEEP" >&5 echo "${ECHO_T}$SWEEP" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi if test "x$ac_cv_path_SWEEP" = "x"; then { { echo "$as_me:$LINENO: error: sweep not found" >&5 echo "$as_me: error: sweep not found" >&2;} { (exit 1); exit 1; }; } fi CPPFLAGS="$CPPFLAGS -DSWEEP='\"$ac_cv_path_SWEEP\"'" ripmime_possible_path="/var/qmail/bin:/usr/bin:/usr/local/bin:/bin:/opt/ripmime/bin:/usr/local/ripmime/bin" # Extract the first word of "ripmime", so it can be a program name with args. set dummy ripmime; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_path_RIPMIME+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else case $RIPMIME in [\\/]* | ?:[\\/]*) ac_cv_path_RIPMIME="$RIPMIME" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $ripmime_possible_path do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_RIPMIME="$as_dir/$ac_word$ac_exec_ext" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done ;; esac fi RIPMIME=$ac_cv_path_RIPMIME if test -n "$RIPMIME"; then echo "$as_me:$LINENO: result: $RIPMIME" >&5 echo "${ECHO_T}$RIPMIME" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi if test "x$ac_cv_path_RIPMIME" = "x"; then { { echo "$as_me:$LINENO: error: ripmime not found" >&5 echo "$as_me: error: ripmime not found" >&2;} { (exit 1); exit 1; }; } fi CPPFLAGS="$CPPFLAGS -DRIPMIME='\"$ac_cv_path_RIPMIME\"'" qmail_queue_possible_path="/var/qmail/bin:/usr/bin:/usr/local/bin:/bin:/opt/qmail/bin:/usr/local/qmail/bin" # Extract the first word of "qmail-queue-old", so it can be a program name with args. set dummy qmail-queue-old; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_path_QMAIL_QUEUE+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else case $QMAIL_QUEUE in [\\/]* | ?:[\\/]*) ac_cv_path_QMAIL_QUEUE="$QMAIL_QUEUE" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $qmail_queue_possible_path do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_QMAIL_QUEUE="$as_dir/$ac_word$ac_exec_ext" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done ;; esac fi QMAIL_QUEUE=$ac_cv_path_QMAIL_QUEUE if test -n "$QMAIL_QUEUE"; then echo "$as_me:$LINENO: result: $QMAIL_QUEUE" >&5 echo "${ECHO_T}$QMAIL_QUEUE" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi if test "x$ac_cv_path_QMAIL_QUEUE" = "x"; then { { echo "$as_me:$LINENO: error: qmail-queue-old not found" >&5 echo "$as_me: error: qmail-queue-old not found" >&2;} { (exit 1); exit 1; }; } fi CPPFLAGS="$CPPFLAGS -DQMAIL_QUEUE='\"$ac_cv_path_QMAIL_QUEUE\"'" CPPFLAGS="$CPPFLAGS -D_GNU_SOURCE=1 -I/usr/local/include" LDFLAGS="$LDFLAGS -L/usr/local/lib" echo "$as_me:$LINENO: checking for ANSI C header files" >&5 echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 if test "${ac_cv_header_stdc+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #include #include #include #include _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? egrep -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag else ac_cpp_err= fi else ac_cpp_err=yes fi if test -z "$ac_cpp_err"; then ac_cv_header_stdc=yes else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_cv_header_stdc=no fi rm -f conftest.err conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | egrep "memchr" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | egrep "free" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. if test "$cross_compiling" = yes; then : else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #include #if ((' ' & 0x0FF) == 0x020) # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) #else # define ISLOWER(c) (('a' <= (c) && (c) <= 'i') \ || ('j' <= (c) && (c) <= 'r') \ || ('s' <= (c) && (c) <= 'z')) # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) #endif #define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) int main () { int i; for (i = 0; i < 256; i++) if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); exit (0); } _ACEOF rm -f conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then : else echo "$as_me: program exited with status $ac_status" >&5 echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 ( exit $ac_status ) ac_cv_header_stdc=no fi rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi fi fi echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 echo "${ECHO_T}$ac_cv_header_stdc" >&6 if test $ac_cv_header_stdc = yes; then cat >>confdefs.h <<\_ACEOF #define STDC_HEADERS 1 _ACEOF fi echo "$as_me:$LINENO: checking whether stat file-mode macros are broken" >&5 echo $ECHO_N "checking whether stat file-mode macros are broken... $ECHO_C" >&6 if test "${ac_cv_header_stat_broken+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #include #include #if defined(S_ISBLK) && defined(S_IFDIR) # if S_ISBLK (S_IFDIR) You lose. # endif #endif #if defined(S_ISBLK) && defined(S_IFCHR) # if S_ISBLK (S_IFCHR) You lose. # endif #endif #if defined(S_ISLNK) && defined(S_IFREG) # if S_ISLNK (S_IFREG) You lose. # endif #endif #if defined(S_ISSOCK) && defined(S_IFREG) # if S_ISSOCK (S_IFREG) You lose. # endif #endif _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | egrep "You lose" >/dev/null 2>&1; then ac_cv_header_stat_broken=yes else ac_cv_header_stat_broken=no fi rm -f conftest* fi echo "$as_me:$LINENO: result: $ac_cv_header_stat_broken" >&5 echo "${ECHO_T}$ac_cv_header_stat_broken" >&6 if test $ac_cv_header_stat_broken = yes; then cat >>confdefs.h <<\_ACEOF #define STAT_MACROS_BROKEN 1 _ACEOF fi echo "$as_me:$LINENO: checking whether time.h and sys/time.h may both be included" >&5 echo $ECHO_N "checking whether time.h and sys/time.h may both be included... $ECHO_C" >&6 if test "${ac_cv_header_time+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #include #include #include #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif int main () { if ((struct tm *) 0) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_header_time=yes else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_cv_header_time=no fi rm -f conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_header_time" >&5 echo "${ECHO_T}$ac_cv_header_time" >&6 if test $ac_cv_header_time = yes; then cat >>confdefs.h <<\_ACEOF #define TIME_WITH_SYS_TIME 1 _ACEOF fi ac_header_dirent=no for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h; do as_ac_Header=`echo "ac_cv_header_dirent_$ac_hdr" | $as_tr_sh` echo "$as_me:$LINENO: checking for $ac_hdr that defines DIR" >&5 echo $ECHO_N "checking for $ac_hdr that defines DIR... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #include #include <$ac_hdr> #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif int main () { if ((DIR *) 0) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then eval "$as_ac_Header=yes" else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 eval "$as_ac_Header=no" fi rm -f conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 if test `eval echo '${'$as_ac_Header'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_hdr" | $as_tr_cpp` 1 _ACEOF ac_header_dirent=$ac_hdr; break fi done # Two versions of opendir et al. are in -ldir and -lx on SCO Xenix. if test $ac_header_dirent = dirent.h; then echo "$as_me:$LINENO: checking for library containing opendir" >&5 echo $ECHO_N "checking for library containing opendir... $ECHO_C" >&6 if test "${ac_cv_search_opendir+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_func_search_save_LIBS=$LIBS ac_cv_search_opendir=no cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char opendir (); #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif int main () { opendir (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_search_opendir="none required" else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext if test "$ac_cv_search_opendir" = no; then for ac_lib in dir; do LIBS="-l$ac_lib $ac_func_search_save_LIBS" cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char opendir (); #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif int main () { opendir (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_search_opendir="-l$ac_lib" break else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext done fi LIBS=$ac_func_search_save_LIBS fi echo "$as_me:$LINENO: result: $ac_cv_search_opendir" >&5 echo "${ECHO_T}$ac_cv_search_opendir" >&6 if test "$ac_cv_search_opendir" != no; then test "$ac_cv_search_opendir" = "none required" || LIBS="$ac_cv_search_opendir $LIBS" fi else echo "$as_me:$LINENO: checking for library containing opendir" >&5 echo $ECHO_N "checking for library containing opendir... $ECHO_C" >&6 if test "${ac_cv_search_opendir+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_func_search_save_LIBS=$LIBS ac_cv_search_opendir=no cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char opendir (); #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif int main () { opendir (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_search_opendir="none required" else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext if test "$ac_cv_search_opendir" = no; then for ac_lib in x; do LIBS="-l$ac_lib $ac_func_search_save_LIBS" cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char opendir (); #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif int main () { opendir (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_search_opendir="-l$ac_lib" break else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext done fi LIBS=$ac_func_search_save_LIBS fi echo "$as_me:$LINENO: result: $ac_cv_search_opendir" >&5 echo "${ECHO_T}$ac_cv_search_opendir" >&6 if test "$ac_cv_search_opendir" != no; then test "$ac_cv_search_opendir" = "none required" || LIBS="$ac_cv_search_opendir $LIBS" fi fi echo "$as_me:$LINENO: checking for sys/wait.h that is POSIX.1 compatible" >&5 echo $ECHO_N "checking for sys/wait.h that is POSIX.1 compatible... $ECHO_C" >&6 if test "${ac_cv_header_sys_wait_h+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #include #include #ifndef WEXITSTATUS # define WEXITSTATUS(stat_val) ((unsigned)(stat_val) >> 8) #endif #ifndef WIFEXITED # define WIFEXITED(stat_val) (((stat_val) & 255) == 0) #endif #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif int main () { int s; wait (&s); s = WIFEXITED (s) ? WEXITSTATUS (s) : 1; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_header_sys_wait_h=yes else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_cv_header_sys_wait_h=no fi rm -f conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_header_sys_wait_h" >&5 echo "${ECHO_T}$ac_cv_header_sys_wait_h" >&6 if test $ac_cv_header_sys_wait_h = yes; then cat >>confdefs.h <<\_ACEOF #define HAVE_SYS_WAIT_H 1 _ACEOF fi # On IRIX 5.3, sys/types and inttypes.h are conflicting. for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ inttypes.h stdint.h unistd.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then eval "$as_ac_Header=yes" else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 eval "$as_ac_Header=no" fi rm -f conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 if test `eval echo '${'$as_ac_Header'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done for ac_header in unistd.h string.h strings.h sys/param.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` if eval "test \"\${$as_ac_Header+set}\" = set"; then echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 else # Is the header compilable? echo "$as_me:$LINENO: checking $ac_header usability" >&5 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f conftest.$ac_objext conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 echo "${ECHO_T}$ac_header_compiler" >&6 # Is the header present? echo "$as_me:$LINENO: checking $ac_header presence" >&5 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #include <$ac_header> _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? egrep -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag else ac_cpp_err= fi else ac_cpp_err=yes fi if test -z "$ac_cpp_err"; then ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 echo "${ECHO_T}$ac_header_preproc" >&6 # So? What about this header? case $ac_header_compiler:$ac_header_preproc in yes:no ) { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; no:yes ) { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; esac echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else eval "$as_ac_Header=$ac_header_preproc" fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 fi if test `eval echo '${'$as_ac_Header'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done for ac_header in sys/time.h sys/resource.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` if eval "test \"\${$as_ac_Header+set}\" = set"; then echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 else # Is the header compilable? echo "$as_me:$LINENO: checking $ac_header usability" >&5 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f conftest.$ac_objext conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 echo "${ECHO_T}$ac_header_compiler" >&6 # Is the header present? echo "$as_me:$LINENO: checking $ac_header presence" >&5 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #include <$ac_header> _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? egrep -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag else ac_cpp_err= fi else ac_cpp_err=yes fi if test -z "$ac_cpp_err"; then ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 echo "${ECHO_T}$ac_header_preproc" >&6 # So? What about this header? case $ac_header_compiler:$ac_header_preproc in yes:no ) { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; no:yes ) { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; esac echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else eval "$as_ac_Header=$ac_header_preproc" fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 fi if test `eval echo '${'$as_ac_Header'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done for ac_header in stddef.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` if eval "test \"\${$as_ac_Header+set}\" = set"; then echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 else # Is the header compilable? echo "$as_me:$LINENO: checking $ac_header usability" >&5 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f conftest.$ac_objext conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 echo "${ECHO_T}$ac_header_compiler" >&6 # Is the header present? echo "$as_me:$LINENO: checking $ac_header presence" >&5 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #include <$ac_header> _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? egrep -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag else ac_cpp_err= fi else ac_cpp_err=yes fi if test -z "$ac_cpp_err"; then ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 echo "${ECHO_T}$ac_header_preproc" >&6 # So? What about this header? case $ac_header_compiler:$ac_header_preproc in yes:no ) { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; no:yes ) { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; esac echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else eval "$as_ac_Header=$ac_header_preproc" fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 fi if test `eval echo '${'$as_ac_Header'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done for ac_header in stdarg.h varargs.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` if eval "test \"\${$as_ac_Header+set}\" = set"; then echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 else # Is the header compilable? echo "$as_me:$LINENO: checking $ac_header usability" >&5 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f conftest.$ac_objext conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 echo "${ECHO_T}$ac_header_compiler" >&6 # Is the header present? echo "$as_me:$LINENO: checking $ac_header presence" >&5 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #include <$ac_header> _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? egrep -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag else ac_cpp_err= fi else ac_cpp_err=yes fi if test -z "$ac_cpp_err"; then ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 echo "${ECHO_T}$ac_header_preproc" >&6 # So? What about this header? case $ac_header_compiler:$ac_header_preproc in yes:no ) { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; no:yes ) { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; esac echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else eval "$as_ac_Header=$ac_header_preproc" fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 fi if test `eval echo '${'$as_ac_Header'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done if test $ac_cv_c_compiler_gnu = yes; then echo "$as_me:$LINENO: checking whether $CC needs -traditional" >&5 echo $ECHO_N "checking whether $CC needs -traditional... $ECHO_C" >&6 if test "${ac_cv_prog_gcc_traditional+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_pattern="Autoconf.*'x'" cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #include Autoconf TIOCGETP _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | egrep "$ac_pattern" >/dev/null 2>&1; then ac_cv_prog_gcc_traditional=yes else ac_cv_prog_gcc_traditional=no fi rm -f conftest* if test $ac_cv_prog_gcc_traditional = no; then cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #include Autoconf TCGETA _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | egrep "$ac_pattern" >/dev/null 2>&1; then ac_cv_prog_gcc_traditional=yes fi rm -f conftest* fi fi echo "$as_me:$LINENO: result: $ac_cv_prog_gcc_traditional" >&5 echo "${ECHO_T}$ac_cv_prog_gcc_traditional" >&6 if test $ac_cv_prog_gcc_traditional = yes; then CC="$CC -traditional" fi fi echo "$as_me:$LINENO: checking for inline" >&5 echo $ECHO_N "checking for inline... $ECHO_C" >&6 if test "${ac_cv_c_inline+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_cv_c_inline=no for ac_kw in inline __inline__ __inline; do cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #ifndef __cplusplus typedef int foo_t; static $ac_kw foo_t static_foo () {return 0; } $ac_kw foo_t foo () {return 0; } #endif _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_c_inline=$ac_kw; break else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest.$ac_objext conftest.$ac_ext done fi echo "$as_me:$LINENO: result: $ac_cv_c_inline" >&5 echo "${ECHO_T}$ac_cv_c_inline" >&6 case $ac_cv_c_inline in inline | yes) ;; no) cat >>confdefs.h <<\_ACEOF #define inline _ACEOF ;; *) cat >>confdefs.h <<_ACEOF #define inline $ac_cv_c_inline _ACEOF ;; esac echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5 echo $ECHO_N "checking for an ANSI C-conforming const... $ECHO_C" >&6 if test "${ac_cv_c_const+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif int main () { /* FIXME: Include the comments suggested by Paul. */ #ifndef __cplusplus /* Ultrix mips cc rejects this. */ typedef int charset[2]; const charset x; /* SunOS 4.1.1 cc rejects this. */ char const *const *ccp; char **p; /* NEC SVR4.0.2 mips cc rejects this. */ struct point {int x, y;}; static struct point const zero = {0,0}; /* AIX XL C 1.02.0.0 rejects this. It does not let you subtract one const X* pointer from another in an arm of an if-expression whose if-part is not a constant expression */ const char *g = "string"; ccp = &g + (g ? g-g : 0); /* HPUX 7.0 cc rejects these. */ ++ccp; p = (char**) ccp; ccp = (char const *const *) p; { /* SCO 3.2v4 cc rejects this. */ char *t; char const *s = 0 ? (char *) 0 : (char const *) 0; *t++ = 0; } { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ int x[] = {25, 17}; const int *foo = &x[0]; ++foo; } { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ typedef const int *iptr; iptr p = 0; ++p; } { /* AIX XL C 1.02.0.0 rejects this saying "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ struct s { int j; const int *ap[3]; }; struct s *b; b->j = 5; } { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ const int foo = 10; } #endif ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_c_const=yes else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_cv_c_const=no fi rm -f conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5 echo "${ECHO_T}$ac_cv_c_const" >&6 if test $ac_cv_c_const = no; then cat >>confdefs.h <<\_ACEOF #define const _ACEOF fi echo "$as_me:$LINENO: checking for mode_t" >&5 echo $ECHO_N "checking for mode_t... $ECHO_C" >&6 if test "${ac_cv_type_mode_t+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" $ac_includes_default #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif int main () { if ((mode_t *) 0) return 0; if (sizeof (mode_t)) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_type_mode_t=yes else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_cv_type_mode_t=no fi rm -f conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_type_mode_t" >&5 echo "${ECHO_T}$ac_cv_type_mode_t" >&6 if test $ac_cv_type_mode_t = yes; then : else cat >>confdefs.h <<_ACEOF #define mode_t int _ACEOF fi echo "$as_me:$LINENO: checking for pid_t" >&5 echo $ECHO_N "checking for pid_t... $ECHO_C" >&6 if test "${ac_cv_type_pid_t+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" $ac_includes_default #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif int main () { if ((pid_t *) 0) return 0; if (sizeof (pid_t)) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_type_pid_t=yes else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_cv_type_pid_t=no fi rm -f conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_type_pid_t" >&5 echo "${ECHO_T}$ac_cv_type_pid_t" >&6 if test $ac_cv_type_pid_t = yes; then : else cat >>confdefs.h <<_ACEOF #define pid_t int _ACEOF fi echo "$as_me:$LINENO: checking for size_t" >&5 echo $ECHO_N "checking for size_t... $ECHO_C" >&6 if test "${ac_cv_type_size_t+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" $ac_includes_default #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif int main () { if ((size_t *) 0) return 0; if (sizeof (size_t)) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_type_size_t=yes else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_cv_type_size_t=no fi rm -f conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_type_size_t" >&5 echo "${ECHO_T}$ac_cv_type_size_t" >&6 if test $ac_cv_type_size_t = yes; then : else cat >>confdefs.h <<_ACEOF #define size_t unsigned _ACEOF fi echo "$as_me:$LINENO: checking whether struct tm is in sys/time.h or time.h" >&5 echo $ECHO_N "checking whether struct tm is in sys/time.h or time.h... $ECHO_C" >&6 if test "${ac_cv_struct_tm+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #include #include #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif int main () { struct tm *tp; tp->tm_sec; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_struct_tm=time.h else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_cv_struct_tm=sys/time.h fi rm -f conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_struct_tm" >&5 echo "${ECHO_T}$ac_cv_struct_tm" >&6 if test $ac_cv_struct_tm = sys/time.h; then cat >>confdefs.h <<\_ACEOF #define TM_IN_SYS_TIME 1 _ACEOF fi echo "$as_me:$LINENO: checking return type of signal handlers" >&5 echo $ECHO_N "checking return type of signal handlers... $ECHO_C" >&6 if test "${ac_cv_type_signal+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #include #include #ifdef signal # undef signal #endif #ifdef __cplusplus extern "C" void (*signal (int, void (*)(int)))(int); #else void (*signal ()) (); #endif #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif int main () { int i; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_type_signal=void else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_cv_type_signal=int fi rm -f conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_type_signal" >&5 echo "${ECHO_T}$ac_cv_type_signal" >&6 cat >>confdefs.h <<_ACEOF #define RETSIGTYPE $ac_cv_type_signal _ACEOF echo "$as_me:$LINENO: checking for uid_t in sys/types.h" >&5 echo $ECHO_N "checking for uid_t in sys/types.h... $ECHO_C" >&6 if test "${ac_cv_type_uid_t+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | egrep "uid_t" >/dev/null 2>&1; then ac_cv_type_uid_t=yes else ac_cv_type_uid_t=no fi rm -f conftest* fi echo "$as_me:$LINENO: result: $ac_cv_type_uid_t" >&5 echo "${ECHO_T}$ac_cv_type_uid_t" >&6 if test $ac_cv_type_uid_t = no; then cat >>confdefs.h <<\_ACEOF #define uid_t int _ACEOF cat >>confdefs.h <<\_ACEOF #define gid_t int _ACEOF fi echo "$as_me:$LINENO: checking for ssize_t" >&5 echo $ECHO_N "checking for ssize_t... $ECHO_C" >&6 if test "${ac_cv_type_ssize_t+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #include #ifdef STDC_HEADERS # include # include #else # if HAVE_STDLIB_H # include # endif #endif #ifdef HAVE_UNISTD_H # include #endif #include #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif int main () { if ((ssize_t *) 0) return 0; if (sizeof (ssize_t)) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_type_ssize_t=yes else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_cv_type_ssize_t=no fi rm -f conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_type_ssize_t" >&5 echo "${ECHO_T}$ac_cv_type_ssize_t" >&6 if test $ac_cv_type_ssize_t = yes; then : else cat >>confdefs.h <<\_ACEOF #define ssize_t long int _ACEOF fi echo "$as_me:$LINENO: checking if malloc debugging is wanted" >&5 echo $ECHO_N "checking if malloc debugging is wanted... $ECHO_C" >&6 # Check whether --with-dmalloc or --without-dmalloc was given. if test "${with_dmalloc+set}" = set; then withval="$with_dmalloc" if test "$withval" = yes; then echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6 cat >>confdefs.h <<\_ACEOF #define WITH_DMALLOC 1 _ACEOF LIBS="$LIBS -ldmalloc" LDFLAGS="$LDFLAGS -g" else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi; # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works # for constant arguments. Useless! echo "$as_me:$LINENO: checking for working alloca.h" >&5 echo $ECHO_N "checking for working alloca.h... $ECHO_C" >&6 if test "${ac_cv_working_alloca_h+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #include #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif int main () { char *p = (char *) alloca (2 * sizeof (int)); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_working_alloca_h=yes else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_cv_working_alloca_h=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_working_alloca_h" >&5 echo "${ECHO_T}$ac_cv_working_alloca_h" >&6 if test $ac_cv_working_alloca_h = yes; then cat >>confdefs.h <<\_ACEOF #define HAVE_ALLOCA_H 1 _ACEOF fi echo "$as_me:$LINENO: checking for alloca" >&5 echo $ECHO_N "checking for alloca... $ECHO_C" >&6 if test "${ac_cv_func_alloca_works+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #ifdef __GNUC__ # define alloca __builtin_alloca #else # ifdef _MSC_VER # include # define alloca _alloca # else # if HAVE_ALLOCA_H # include # else # ifdef _AIX #pragma alloca # else # ifndef alloca /* predefined by HP cc +Olibcalls */ char *alloca (); # endif # endif # endif # endif #endif #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif int main () { char *p = (char *) alloca (1); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_func_alloca_works=yes else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_cv_func_alloca_works=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_func_alloca_works" >&5 echo "${ECHO_T}$ac_cv_func_alloca_works" >&6 if test $ac_cv_func_alloca_works = yes; then cat >>confdefs.h <<\_ACEOF #define HAVE_ALLOCA 1 _ACEOF else # The SVR3 libPW and SVR4 libucb both contain incompatible functions # that cause trouble. Some versions do not even contain alloca or # contain a buggy version. If you still want to use their alloca, # use ar to extract alloca.o from them instead of compiling alloca.c. ALLOCA=alloca.$ac_objext cat >>confdefs.h <<\_ACEOF #define C_ALLOCA 1 _ACEOF echo "$as_me:$LINENO: checking whether \`alloca.c' needs Cray hooks" >&5 echo $ECHO_N "checking whether \`alloca.c' needs Cray hooks... $ECHO_C" >&6 if test "${ac_cv_os_cray+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #if defined(CRAY) && ! defined(CRAY2) webecray #else wenotbecray #endif _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | egrep "webecray" >/dev/null 2>&1; then ac_cv_os_cray=yes else ac_cv_os_cray=no fi rm -f conftest* fi echo "$as_me:$LINENO: result: $ac_cv_os_cray" >&5 echo "${ECHO_T}$ac_cv_os_cray" >&6 if test $ac_cv_os_cray = yes; then for ac_func in _getb67 GETB67 getb67; do as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` echo "$as_me:$LINENO: checking for $ac_func" >&5 echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 if eval "test \"\${$as_ac_var+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func (); below. */ #include /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func (); char (*f) (); #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif int main () { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else f = $ac_func; #endif ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then eval "$as_ac_var=yes" else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 eval "$as_ac_var=no" fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 if test `eval echo '${'$as_ac_var'}'` = yes; then cat >>confdefs.h <<_ACEOF #define CRAY_STACKSEG_END $ac_func _ACEOF break fi done fi echo "$as_me:$LINENO: checking stack direction for C alloca" >&5 echo $ECHO_N "checking stack direction for C alloca... $ECHO_C" >&6 if test "${ac_cv_c_stack_direction+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test "$cross_compiling" = yes; then ac_cv_c_stack_direction=0 else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" int find_stack_direction () { static char *addr = 0; auto char dummy; if (addr == 0) { addr = &dummy; return find_stack_direction (); } else return (&dummy > addr) ? 1 : -1; } int main () { exit (find_stack_direction () < 0); } _ACEOF rm -f conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_c_stack_direction=1 else echo "$as_me: program exited with status $ac_status" >&5 echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 ( exit $ac_status ) ac_cv_c_stack_direction=-1 fi rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi fi echo "$as_me:$LINENO: result: $ac_cv_c_stack_direction" >&5 echo "${ECHO_T}$ac_cv_c_stack_direction" >&6 cat >>confdefs.h <<_ACEOF #define STACK_DIRECTION $ac_cv_c_stack_direction _ACEOF fi echo "$as_me:$LINENO: checking whether lstat dereferences a symlink specified with a trailing slash" >&5 echo $ECHO_N "checking whether lstat dereferences a symlink specified with a trailing slash... $ECHO_C" >&6 if test "${ac_cv_func_lstat_dereferences_slashed_symlink+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else rm -f conftest.sym conftest.file echo >conftest.file if test "$as_ln_s" = "ln -s" && ln -s conftest.file conftest.sym; then if test "$cross_compiling" = yes; then ac_cv_func_lstat_dereferences_slashed_symlink=no else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" $ac_includes_default #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif int main () { struct stat sbuf; /* Linux will dereference the symlink and fail. That is better in the sense that it means we will not have to compile and use the lstat wrapper. */ exit (lstat ("conftest.sym/", &sbuf) ? 0 : 1); ; return 0; } _ACEOF rm -f conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_func_lstat_dereferences_slashed_symlink=yes else echo "$as_me: program exited with status $ac_status" >&5 echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 ( exit $ac_status ) ac_cv_func_lstat_dereferences_slashed_symlink=no fi rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi else # If the `ln -s' command failed, then we probably don't even # have an lstat function. ac_cv_func_lstat_dereferences_slashed_symlink=no fi rm -f conftest.sym conftest.file fi echo "$as_me:$LINENO: result: $ac_cv_func_lstat_dereferences_slashed_symlink" >&5 echo "${ECHO_T}$ac_cv_func_lstat_dereferences_slashed_symlink" >&6 test $ac_cv_func_lstat_dereferences_slashed_symlink = yes && cat >>confdefs.h <<_ACEOF #define LSTAT_FOLLOWS_SLASHED_SYMLINK 1 _ACEOF if test $ac_cv_func_lstat_dereferences_slashed_symlink = no; then LIBOBJS="$LIBOBJS lstat.$ac_objext" fi echo "$as_me:$LINENO: checking whether stat accepts an empty string" >&5 echo $ECHO_N "checking whether stat accepts an empty string... $ECHO_C" >&6 if test "${ac_cv_func_stat_empty_string_bug+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test "$cross_compiling" = yes; then ac_cv_func_stat_empty_string_bug=yes else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" $ac_includes_default #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif int main () { struct stat sbuf; exit (stat ("", &sbuf) ? 1 : 0); ; return 0; } _ACEOF rm -f conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_func_stat_empty_string_bug=yes else echo "$as_me: program exited with status $ac_status" >&5 echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 ( exit $ac_status ) ac_cv_func_stat_empty_string_bug=no fi rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi fi echo "$as_me:$LINENO: result: $ac_cv_func_stat_empty_string_bug" >&5 echo "${ECHO_T}$ac_cv_func_stat_empty_string_bug" >&6 if test $ac_cv_func_stat_empty_string_bug = yes; then LIBOBJS="$LIBOBJS stat.$ac_objext" cat >>confdefs.h <<_ACEOF #define HAVE_STAT_EMPTY_STRING_BUG 1 _ACEOF fi for ac_func in vprintf do as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` echo "$as_me:$LINENO: checking for $ac_func" >&5 echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 if eval "test \"\${$as_ac_var+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func (); below. */ #include /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func (); char (*f) (); #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif int main () { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else f = $ac_func; #endif ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then eval "$as_ac_var=yes" else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 eval "$as_ac_var=no" fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 if test `eval echo '${'$as_ac_var'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF echo "$as_me:$LINENO: checking for _doprnt" >&5 echo $ECHO_N "checking for _doprnt... $ECHO_C" >&6 if test "${ac_cv_func__doprnt+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char _doprnt (); below. */ #include /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char _doprnt (); char (*f) (); #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif int main () { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub__doprnt) || defined (__stub____doprnt) choke me #else f = _doprnt; #endif ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_func__doprnt=yes else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_cv_func__doprnt=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_func__doprnt" >&5 echo "${ECHO_T}$ac_cv_func__doprnt" >&6 if test $ac_cv_func__doprnt = yes; then cat >>confdefs.h <<\_ACEOF #define HAVE_DOPRNT 1 _ACEOF fi fi done for ac_func in snprintf vsnprintf vfprintf do as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` echo "$as_me:$LINENO: checking for $ac_func" >&5 echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 if eval "test \"\${$as_ac_var+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func (); below. */ #include /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func (); char (*f) (); #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif int main () { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else f = $ac_func; #endif ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then eval "$as_ac_var=yes" else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 eval "$as_ac_var=no" fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 if test `eval echo '${'$as_ac_var'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF fi done for ac_func in nanosleep usleep do as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` echo "$as_me:$LINENO: checking for $ac_func" >&5 echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 if eval "test \"\${$as_ac_var+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func (); below. */ #include /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func (); char (*f) (); #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif int main () { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else f = $ac_func; #endif ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then eval "$as_ac_var=yes" else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 eval "$as_ac_var=no" fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 if test `eval echo '${'$as_ac_var'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF fi done echo "$as_me:$LINENO: checking whether usleep returns something" >&5 echo $ECHO_N "checking whether usleep returns something... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #include #ifdef STDC_HEADERS # include # include #else # if HAVE_STDLIB_H # include # endif #endif #ifdef HAVE_UNISTD_H # include #endif #ifdef TIME_WITH_SYS_TIME # include # include #else # if HAVE_SYS_TIME_H # include # else # include # endif #endif #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif int main () { return (int) usleep(50000UL); ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then cat >>confdefs.h <<\_ACEOF #define USLEEP_RETURNS_INT _ACEOF echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6 else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 echo "$as_me:$LINENO: result: probably nothing" >&5 echo "${ECHO_T}probably nothing" >&6 fi rm -f conftest.$ac_objext conftest.$ac_ext echo "$as_me:$LINENO: checking whether snprintf is C99 conformant" >&5 echo $ECHO_N "checking whether snprintf is C99 conformant... $ECHO_C" >&6 if test "$cross_compiling" = yes; then { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling" >&5 echo "$as_me: error: cannot run test program while cross compiling" >&2;} { (exit 1); exit 1; }; } else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #include #ifdef STDC_HEADERS # include # include #else # if HAVE_STDLIB_H # include # endif #endif #ifdef HAVE_UNISTD_H # include #endif int main(void) { char buf[4]; (void) fprintf(fopen("conftestval", "wt"), "%d\n", (int) snprintf(buf, sizeof buf, "12345678")); return 0; } _ACEOF rm -f conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then CONF_SNPRINTF_TYPE=`cat conftestval` else echo "$as_me: program exited with status $ac_status" >&5 echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: done" >&5 echo "${ECHO_T}done" >&6 if test "x$CONF_SNPRINTF_TYPE" = "x" ; then { echo "$as_me:$LINENO: WARNING: your operating system doesn't implement snprintf" >&5 echo "$as_me: WARNING: your operating system doesn't implement snprintf" >&2;} else cat >>confdefs.h <<_ACEOF #define CONF_SNPRINTF_TYPE $CONF_SNPRINTF_TYPE _ACEOF fi echo "$as_me:$LINENO: checking if malloc debugging is wanted" >&5 echo $ECHO_N "checking if malloc debugging is wanted... $ECHO_C" >&6 # Check whether --with-dmalloc or --without-dmalloc was given. if test "${with_dmalloc+set}" = set; then withval="$with_dmalloc" if test "$withval" = yes; then echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6 cat >>confdefs.h <<\_ACEOF #define WITH_DMALLOC 1 _ACEOF LIBS="$LIBS -ldmalloc" LDFLAGS="$LDFLAGS -g" else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi; # Check whether --with-concurrency or --without-concurrency was given. if test "${with_concurrency+set}" = set; then withval="$with_concurrency" if test "x$withval" != "x" ; then cat >>confdefs.h <<_ACEOF #define SCAN_CONCURRENCY $withval _ACEOF fi fi; ac_config_files="$ac_config_files Makefile src/Makefile" cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure # scripts and configure runs, see configure's option --config-cache. # It is not useful on other systems. If it contains results you don't # want to keep, you may remove or edit it. # # config.status only pays attention to the cache file if you give it # the --recheck option to rerun configure. # # `ac_cv_env_foo' variables (set or unset) will be overridden when # loading this file, other *unset* `ac_cv_foo' will be assigned the # following values. _ACEOF # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. # So, don't put newlines in cache variables' values. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. { (set) 2>&1 | case `(ac_space=' '; set | grep ac_space) 2>&1` in *ac_space=\ *) # `set' does not quote correctly, so add quotes (double-quote # substitution turns \\\\ into \\, and sed turns \\ into \). sed -n \ "s/'/'\\\\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" ;; *) # `set' quotes correctly as required by POSIX, so do not add quotes. sed -n \ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" ;; esac; } | sed ' t clear : clear s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ t end /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ : end' >>confcache if cmp -s $cache_file confcache; then :; else if test -w $cache_file; then test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" cat confcache >$cache_file else echo "not updating unwritable cache $cache_file" fi fi rm -f confcache test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' # VPATH may cause trouble with some makes, so we remove $(srcdir), # ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and # trailing colons and then remove the whole line if VPATH becomes empty # (actually we leave an empty line to preserve line numbers). if test "x$srcdir" = x.; then ac_vpsub='/^[ ]*VPATH[ ]*=/{ s/:*\$(srcdir):*/:/; s/:*\${srcdir}:*/:/; s/:*@srcdir@:*/:/; s/^\([^=]*=[ ]*\):*/\1/; s/:*$//; s/^[^=]*=[ ]*$//; }' fi DEFS=-DHAVE_CONFIG_H if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. Usually this means the macro was only invoked conditionally." >&5 echo "$as_me: error: conditional \"AMDEP\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi : ${CONFIG_STATUS=./config.status} ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files $CONFIG_STATUS" { echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 echo "$as_me: creating $CONFIG_STATUS" >&6;} cat >$CONFIG_STATUS <<_ACEOF #! $SHELL # Generated by $as_me. # Run this file to recreate the current configuration. # Compiler output produced by configure, useful for debugging # configure, is in config.log if it exists. debug=false SHELL=\${CONFIG_SHELL-$SHELL} _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF ## --------------------- ## ## M4sh Initialization. ## ## --------------------- ## # Be Bourne compatible if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then set -o posix fi # NLS nuisances. # Support unset when possible. if (FOO=FOO; unset FOO) >/dev/null 2>&1; then as_unset=unset else as_unset=false fi (set +x; test -n "`(LANG=C; export LANG) 2>&1`") && { $as_unset LANG || test "${LANG+set}" != set; } || { LANG=C; export LANG; } (set +x; test -n "`(LC_ALL=C; export LC_ALL) 2>&1`") && { $as_unset LC_ALL || test "${LC_ALL+set}" != set; } || { LC_ALL=C; export LC_ALL; } (set +x; test -n "`(LC_TIME=C; export LC_TIME) 2>&1`") && { $as_unset LC_TIME || test "${LC_TIME+set}" != set; } || { LC_TIME=C; export LC_TIME; } (set +x; test -n "`(LC_CTYPE=C; export LC_CTYPE) 2>&1`") && { $as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set; } || { LC_CTYPE=C; export LC_CTYPE; } (set +x; test -n "`(LANGUAGE=C; export LANGUAGE) 2>&1`") && { $as_unset LANGUAGE || test "${LANGUAGE+set}" != set; } || { LANGUAGE=C; export LANGUAGE; } (set +x; test -n "`(LC_COLLATE=C; export LC_COLLATE) 2>&1`") && { $as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set; } || { LC_COLLATE=C; export LC_COLLATE; } (set +x; test -n "`(LC_NUMERIC=C; export LC_NUMERIC) 2>&1`") && { $as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set; } || { LC_NUMERIC=C; export LC_NUMERIC; } (set +x; test -n "`(LC_MESSAGES=C; export LC_MESSAGES) 2>&1`") && { $as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set; } || { LC_MESSAGES=C; export LC_MESSAGES; } # Required to use basename. if expr a : '\(a\)' >/dev/null 2>&1; then as_expr=expr else as_expr=false fi if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi # Name of the executable. as_me=`$as_basename "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)$' \| \ . : '\(.\)' 2>/dev/null || echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } /^X\/\(\/\/\)$/{ s//\1/; q; } /^X\/\(\/\).*/{ s//\1/; q; } s/.*/./; q'` # PATH needs CR, and LINENO needs CR and PATH. # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then echo "#! /bin/sh" >conftest.sh echo "exit 0" >>conftest.sh chmod +x conftest.sh if (PATH=".;."; conftest.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi rm -f conftest.sh fi as_lineno_1=$LINENO as_lineno_2=$LINENO as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` test "x$as_lineno_1" != "x$as_lineno_2" && test "x$as_lineno_3" = "x$as_lineno_2" || { # Find who we are. Look in the path if we contain no path at all # relative or not. case $0 in *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} { (exit 1); exit 1; }; } fi case $CONFIG_SHELL in '') as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for as_base in sh bash ksh sh5; do case $as_dir in /*) if ("$as_dir/$as_base" -c ' as_lineno_1=$LINENO as_lineno_2=$LINENO as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` test "x$as_lineno_1" != "x$as_lineno_2" && test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } CONFIG_SHELL=$as_dir/$as_base export CONFIG_SHELL exec "$CONFIG_SHELL" "$0" ${1+"$@"} fi;; esac done done ;; esac # Create $as_me.lineno as a copy of $as_myself, but with $LINENO # uniformly replaced by the line number. The first 'sed' inserts a # line-number line before each line; the second 'sed' does the real # work. The second script uses 'N' to pair each line-number line # with the numbered line, and appends trailing '-' during # substitution so that $LINENO is not a special case at line end. # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) sed '=' <$as_myself | sed ' N s,$,-, : loop s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, t loop s,-$,, s,^['$as_cr_digits']*\n,, ' >$as_me.lineno && chmod +x $as_me.lineno || { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} { (exit 1); exit 1; }; } # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensible to this). . ./$as_me.lineno # Exit status is that of the last command. exit } case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in *c*,-n*) ECHO_N= ECHO_C=' ' ECHO_T=' ' ;; *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; *) ECHO_N= ECHO_C='\c' ECHO_T= ;; esac if expr a : '\(a\)' >/dev/null 2>&1; then as_expr=expr else as_expr=false fi rm -f conf$$ conf$$.exe conf$$.file echo >conf$$.file if ln -s conf$$.file conf$$ 2>/dev/null; then # We could just check for DJGPP; but this test a) works b) is more generic # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). if test -f conf$$.exe; then # Don't use ln at all; we don't have any links as_ln_s='cp -p' else as_ln_s='ln -s' fi elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -p' fi rm -f conf$$ conf$$.exe conf$$.file if mkdir -p . 2>/dev/null; then as_mkdir_p=: else as_mkdir_p=false fi as_executable_p="test -f" # Sed expression to map a string onto a valid CPP name. as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g" # Sed expression to map a string onto a valid variable name. as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g" # IFS # We need space, tab and new line, in precisely that order. as_nl=' ' IFS=" $as_nl" # CDPATH. $as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=$PATH_SEPARATOR; export CDPATH; } exec 6>&1 # Open the log real soon, to keep \$[0] and so on meaningful, and to # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. Logging --version etc. is OK. exec 5>>config.log { echo sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ## Running $as_me. ## _ASBOX } >&5 cat >&5 <<_CSEOF This file was extended by $as_me, which was generated by GNU Autoconf 2.53a. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS CONFIG_LINKS = $CONFIG_LINKS CONFIG_COMMANDS = $CONFIG_COMMANDS $ $0 $@ _CSEOF echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 echo >&5 _ACEOF # Files that config.status was made for. if test -n "$ac_config_files"; then echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS fi if test -n "$ac_config_headers"; then echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS fi if test -n "$ac_config_links"; then echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS fi if test -n "$ac_config_commands"; then echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS fi cat >>$CONFIG_STATUS <<\_ACEOF ac_cs_usage="\ \`$as_me' instantiates files from templates according to the current configuration. Usage: $0 [OPTIONS] [FILE]... -h, --help print this help, then exit -V, --version print version number, then exit -d, --debug don't remove temporary files --recheck update $as_me by reconfiguring in the same conditions --file=FILE[:TEMPLATE] instantiate the configuration file FILE --header=FILE[:TEMPLATE] instantiate the configuration header FILE Configuration files: $config_files Configuration headers: $config_headers Configuration commands: $config_commands Report bugs to ." _ACEOF cat >>$CONFIG_STATUS <<_ACEOF ac_cs_version="\\ config.status configured by $0, generated by GNU Autoconf 2.53a, with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." srcdir=$srcdir INSTALL="$INSTALL" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF # If no file are specified by the user, then we need to provide default # value. By we need to know if files were specified by the user. ac_need_defaults=: while test $# != 0 do case $1 in --*=*) ac_option=`expr "x$1" : 'x\([^=]*\)='` ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` ac_shift=: ;; -*) ac_option=$1 ac_optarg=$2 ac_shift=shift ;; *) # This is not an option, so the user has probably given explicit # arguments. ac_option=$1 ac_need_defaults=false;; esac case $ac_option in # Handling of the options. _ACEOF cat >>$CONFIG_STATUS <<_ACEOF -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) echo "running $SHELL $0 " $ac_configure_args " --no-create --no-recursion" exec $SHELL $0 $ac_configure_args --no-create --no-recursion ;; _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF --version | --vers* | -V ) echo "$ac_cs_version"; exit 0 ;; --he | --h) # Conflict between --help and --header { { echo "$as_me:$LINENO: error: ambiguous option: $1 Try \`$0 --help' for more information." >&5 echo "$as_me: error: ambiguous option: $1 Try \`$0 --help' for more information." >&2;} { (exit 1); exit 1; }; };; --help | --hel | -h ) echo "$ac_cs_usage"; exit 0 ;; --debug | --d* | -d ) debug=: ;; --file | --fil | --fi | --f ) $ac_shift CONFIG_FILES="$CONFIG_FILES $ac_optarg" ac_need_defaults=false;; --header | --heade | --head | --hea ) $ac_shift CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" ac_need_defaults=false;; # This is an error. -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 Try \`$0 --help' for more information." >&5 echo "$as_me: error: unrecognized option: $1 Try \`$0 --help' for more information." >&2;} { (exit 1); exit 1; }; } ;; *) ac_config_targets="$ac_config_targets $1" ;; esac shift done _ACEOF cat >>$CONFIG_STATUS <<_ACEOF # # INIT-COMMANDS section. # AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF for ac_config_target in $ac_config_targets do case "$ac_config_target" in # Handling of arguments. "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; "src/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 echo "$as_me: error: invalid argument: $ac_config_target" >&2;} { (exit 1); exit 1; }; };; esac done # If the user did not use the arguments to specify the items to instantiate, # then the envvar interface is used. Set only those that are not. # We use the long form for the default assignment because of an extremely # bizarre bug on SunOS 4.1.3. if $ac_need_defaults; then test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands fi # Create a temporary directory, and hook for its removal unless debugging. $debug || { trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 trap '{ (exit 1); exit 1; }' 1 2 13 15 } # Create a (secure) tmp directory for tmp files. : ${TMPDIR=/tmp} { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/csXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" } || { tmp=$TMPDIR/cs$$-$RANDOM (umask 077 && mkdir $tmp) } || { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 { (exit 1); exit 1; } } _ACEOF cat >>$CONFIG_STATUS <<_ACEOF # # CONFIG_FILES section. # # No need to generate the scripts if there are no CONFIG_FILES. # This happens for instance when ./config.status config.h if test -n "\$CONFIG_FILES"; then # Protect against being on the right side of a sed subst in config.status. sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF s,@SHELL@,$SHELL,;t t s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t s,@exec_prefix@,$exec_prefix,;t t s,@prefix@,$prefix,;t t s,@program_transform_name@,$program_transform_name,;t t s,@bindir@,$bindir,;t t s,@sbindir@,$sbindir,;t t s,@libexecdir@,$libexecdir,;t t s,@datadir@,$datadir,;t t s,@sysconfdir@,$sysconfdir,;t t s,@sharedstatedir@,$sharedstatedir,;t t s,@localstatedir@,$localstatedir,;t t s,@libdir@,$libdir,;t t s,@includedir@,$includedir,;t t s,@oldincludedir@,$oldincludedir,;t t s,@infodir@,$infodir,;t t s,@mandir@,$mandir,;t t s,@build_alias@,$build_alias,;t t s,@host_alias@,$host_alias,;t t s,@target_alias@,$target_alias,;t t s,@DEFS@,$DEFS,;t t s,@ECHO_C@,$ECHO_C,;t t s,@ECHO_N@,$ECHO_N,;t t s,@ECHO_T@,$ECHO_T,;t t s,@LIBS@,$LIBS,;t t s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t s,@INSTALL_DATA@,$INSTALL_DATA,;t t s,@PACKAGE@,$PACKAGE,;t t s,@VERSION@,$VERSION,;t t s,@ACLOCAL@,$ACLOCAL,;t t s,@AUTOCONF@,$AUTOCONF,;t t s,@AUTOMAKE@,$AUTOMAKE,;t t s,@AUTOHEADER@,$AUTOHEADER,;t t s,@MAKEINFO@,$MAKEINFO,;t t s,@AMTAR@,$AMTAR,;t t s,@install_sh@,$install_sh,;t t s,@STRIP@,$STRIP,;t t s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t s,@AWK@,$AWK,;t t s,@SET_MAKE@,$SET_MAKE,;t t s,@ISODATE@,$ISODATE,;t t s,@CC@,$CC,;t t s,@CFLAGS@,$CFLAGS,;t t s,@LDFLAGS@,$LDFLAGS,;t t s,@CPPFLAGS@,$CPPFLAGS,;t t s,@ac_ct_CC@,$ac_ct_CC,;t t s,@EXEEXT@,$EXEEXT,;t t s,@OBJEXT@,$OBJEXT,;t t s,@DEPDIR@,$DEPDIR,;t t s,@am__include@,$am__include,;t t s,@am__quote@,$am__quote,;t t s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t s,@CCDEPMODE@,$CCDEPMODE,;t t s,@CPP@,$CPP,;t t s,@SWEEP@,$SWEEP,;t t s,@RIPMIME@,$RIPMIME,;t t s,@QMAIL_QUEUE@,$QMAIL_QUEUE,;t t s,@ALLOCA@,$ALLOCA,;t t s,@LIBOBJS@,$LIBOBJS,;t t CEOF _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF # Split the substitutions into bite-sized pieces for seds with # small command number limits, like on Digital OSF/1 and HP-UX. ac_max_sed_lines=48 ac_sed_frag=1 # Number of current file. ac_beg=1 # First line for current file. ac_end=$ac_max_sed_lines # Line after last line for current file. ac_more_lines=: ac_sed_cmds= while $ac_more_lines; do if test $ac_beg -gt 1; then sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag else sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag fi if test ! -s $tmp/subs.frag; then ac_more_lines=false else # The purpose of the label and of the branching condition is to # speed up the sed processing (if there are no `@' at all, there # is no need to browse any of the substitutions). # These are the two extra sed commands mentioned above. (echo ':t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed if test -z "$ac_sed_cmds"; then ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" else ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" fi ac_sed_frag=`expr $ac_sed_frag + 1` ac_beg=$ac_end ac_end=`expr $ac_end + $ac_max_sed_lines` fi done if test -z "$ac_sed_cmds"; then ac_sed_cmds=cat fi fi # test -n "$CONFIG_FILES" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". case $ac_file in - | *:- | *:-:* ) # input from stdin cat >$tmp/stdin ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; * ) ac_file_in=$ac_file.in ;; esac # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. ac_dir=`(dirname "$ac_file") 2>/dev/null || $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ X"$ac_file" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$ac_file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` { if $as_mkdir_p; then mkdir -p "$ac_dir" else as_dir="$ac_dir" as_dirs= while test ! -d "$as_dir"; do as_dirs="$as_dir $as_dirs" as_dir=`(dirname "$as_dir") 2>/dev/null || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` done test ! -n "$as_dirs" || mkdir $as_dirs fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} { (exit 1); exit 1; }; }; } ac_builddir=. if test "$ac_dir" != .; then ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` # A "../" for each directory in $ac_dir_suffix. ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` else ac_dir_suffix= ac_top_builddir= fi case $srcdir in .) # No --srcdir option. We are building in place. ac_srcdir=. if test -z "$ac_top_builddir"; then ac_top_srcdir=. else ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` fi ;; [\\/]* | ?:[\\/]* ) # Absolute path. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ;; *) # Relative path. ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_builddir$srcdir ;; esac # Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be # absolute. ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd` ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` case $INSTALL in [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; *) ac_INSTALL=$ac_top_builddir$INSTALL ;; esac if test x"$ac_file" != x-; then { echo "$as_me:$LINENO: creating $ac_file" >&5 echo "$as_me: creating $ac_file" >&6;} rm -f "$ac_file" fi # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ if test x"$ac_file" = x-; then configure_input= else configure_input="$ac_file. " fi configure_input=$configure_input"Generated from `echo $ac_file_in | sed 's,.*/,,'` by configure." # First look for the input files in the build tree, otherwise in the # src tree. ac_file_inputs=`IFS=: for f in $ac_file_in; do case $f in -) echo $tmp/stdin ;; [\\/$]*) # Absolute (can't be DOS-style, as IFS=:) test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 echo "$as_me: error: cannot find input file: $f" >&2;} { (exit 1); exit 1; }; } echo $f;; *) # Relative if test -f "$f"; then # Build tree echo $f elif test -f "$srcdir/$f"; then # Source tree echo $srcdir/$f else # /dev/null tree { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 echo "$as_me: error: cannot find input file: $f" >&2;} { (exit 1); exit 1; }; } fi;; esac done` || { (exit 1); exit 1; } _ACEOF cat >>$CONFIG_STATUS <<_ACEOF sed "$ac_vpsub $extrasub _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF :t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b s,@configure_input@,$configure_input,;t t s,@srcdir@,$ac_srcdir,;t t s,@abs_srcdir@,$ac_abs_srcdir,;t t s,@top_srcdir@,$ac_top_srcdir,;t t s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t s,@builddir@,$ac_builddir,;t t s,@abs_builddir@,$ac_abs_builddir,;t t s,@top_builddir@,$ac_top_builddir,;t t s,@abs_top_builddir@,$ac_abs_top_builddir,;t t s,@INSTALL@,$ac_INSTALL,;t t " $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out rm -f $tmp/stdin if test x"$ac_file" != x-; then mv $tmp/out $ac_file else cat $tmp/out rm -f $tmp/out fi done _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF # # CONFIG_HEADER section. # # These sed commands are passed to sed as "A NAME B NAME C VALUE D", where # NAME is the cpp macro being defined and VALUE is the value it is being given. # # ac_d sets the value in "#define NAME VALUE" lines. ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)' ac_dB='[ ].*$,\1#\2' ac_dC=' ' ac_dD=',;t' # ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE". ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' ac_uB='$,\1#\2define\3' ac_uC=' ' ac_uD=',;t' for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". case $ac_file in - | *:- | *:-:* ) # input from stdin cat >$tmp/stdin ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; * ) ac_file_in=$ac_file.in ;; esac test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5 echo "$as_me: creating $ac_file" >&6;} # First look for the input files in the build tree, otherwise in the # src tree. ac_file_inputs=`IFS=: for f in $ac_file_in; do case $f in -) echo $tmp/stdin ;; [\\/$]*) # Absolute (can't be DOS-style, as IFS=:) test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 echo "$as_me: error: cannot find input file: $f" >&2;} { (exit 1); exit 1; }; } echo $f;; *) # Relative if test -f "$f"; then # Build tree echo $f elif test -f "$srcdir/$f"; then # Source tree echo $srcdir/$f else # /dev/null tree { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 echo "$as_me: error: cannot find input file: $f" >&2;} { (exit 1); exit 1; }; } fi;; esac done` || { (exit 1); exit 1; } # Remove the trailing spaces. sed 's/[ ]*$//' $ac_file_inputs >$tmp/in _ACEOF # Transform confdefs.h into two sed scripts, `conftest.defines' and # `conftest.undefs', that substitutes the proper values into # config.h.in to produce config.h. The first handles `#define' # templates, and the second `#undef' templates. # And first: Protect against being on the right side of a sed subst in # config.status. Protect against being in an unquoted here document # in config.status. rm -f conftest.defines conftest.undefs # Using a here document instead of a string reduces the quoting nightmare. # Putting comments in sed scripts is not portable. # # `end' is used to avoid that the second main sed command (meant for # 0-ary CPP macros) applies to n-ary macro definitions. # See the Autoconf documentation for `clear'. cat >confdef2sed.sed <<\_ACEOF s/[\\&,]/\\&/g s,[\\$`],\\&,g t clear : clear s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*\)\(([^)]*)\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp t end s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp : end _ACEOF # If some macros were called several times there might be several times # the same #defines, which is useless. Nevertheless, we may not want to # sort them, since we want the *last* AC-DEFINE to be honored. uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs rm -f confdef2sed.sed # This sed command replaces #undef with comments. This is necessary, for # example, in the case of _POSIX_SOURCE, which is predefined and required # on some systems where configure will not decide to define it. cat >>conftest.undefs <<\_ACEOF s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */, _ACEOF # Break up conftest.defines because some shells have a limit on the size # of here documents, and old seds have small limits too (100 cmds). echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS echo ' if egrep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS echo ' :' >>$CONFIG_STATUS rm -f conftest.tail while grep . conftest.defines >/dev/null do # Write a limited-size here document to $tmp/defines.sed. echo ' cat >$tmp/defines.sed <>$CONFIG_STATUS # Speed up: don't consider the non `#define' lines. echo '/^[ ]*#[ ]*define/!b' >>$CONFIG_STATUS # Work around the forget-to-reset-the-flag bug. echo 't clr' >>$CONFIG_STATUS echo ': clr' >>$CONFIG_STATUS sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS echo 'CEOF sed -f $tmp/defines.sed $tmp/in >$tmp/out rm -f $tmp/in mv $tmp/out $tmp/in ' >>$CONFIG_STATUS sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail rm -f conftest.defines mv conftest.tail conftest.defines done rm -f conftest.defines echo ' fi # egrep' >>$CONFIG_STATUS echo >>$CONFIG_STATUS # Break up conftest.undefs because some shells have a limit on the size # of here documents, and old seds have small limits too (100 cmds). echo ' # Handle all the #undef templates' >>$CONFIG_STATUS rm -f conftest.tail while grep . conftest.undefs >/dev/null do # Write a limited-size here document to $tmp/undefs.sed. echo ' cat >$tmp/undefs.sed <>$CONFIG_STATUS # Speed up: don't consider the non `#undef' echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS # Work around the forget-to-reset-the-flag bug. echo 't clr' >>$CONFIG_STATUS echo ': clr' >>$CONFIG_STATUS sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS echo 'CEOF sed -f $tmp/undefs.sed $tmp/in >$tmp/out rm -f $tmp/in mv $tmp/out $tmp/in ' >>$CONFIG_STATUS sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail rm -f conftest.undefs mv conftest.tail conftest.undefs done rm -f conftest.undefs cat >>$CONFIG_STATUS <<\_ACEOF # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ if test x"$ac_file" = x-; then echo "/* Generated by configure. */" >$tmp/config.h else echo "/* $ac_file. Generated by configure. */" >$tmp/config.h fi cat $tmp/in >>$tmp/config.h rm -f $tmp/in if test x"$ac_file" != x-; then if cmp -s $ac_file $tmp/config.h 2>/dev/null; then { echo "$as_me:$LINENO: $ac_file is unchanged" >&5 echo "$as_me: $ac_file is unchanged" >&6;} else ac_dir=`(dirname "$ac_file") 2>/dev/null || $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ X"$ac_file" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$ac_file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` { if $as_mkdir_p; then mkdir -p "$ac_dir" else as_dir="$ac_dir" as_dirs= while test ! -d "$as_dir"; do as_dirs="$as_dir $as_dirs" as_dir=`(dirname "$as_dir") 2>/dev/null || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` done test ! -n "$as_dirs" || mkdir $as_dirs fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} { (exit 1); exit 1; }; }; } rm -f $ac_file mv $tmp/config.h $ac_file fi else cat $tmp/config.h rm -f $tmp/config.h fi # Run the commands associated with the file. case $ac_file in config.h ) # update the timestamp echo 'timestamp for config.h' >"./stamp-h1" ;; esac done _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF # # CONFIG_COMMANDS section. # for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue ac_dest=`echo "$ac_file" | sed 's,:.*,,'` ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'` ac_dir=`(dirname "$ac_dest") 2>/dev/null || $as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_dest" : 'X\(//\)[^/]' \| \ X"$ac_dest" : 'X\(//\)$' \| \ X"$ac_dest" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$ac_dest" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` ac_builddir=. if test "$ac_dir" != .; then ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` # A "../" for each directory in $ac_dir_suffix. ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` else ac_dir_suffix= ac_top_builddir= fi case $srcdir in .) # No --srcdir option. We are building in place. ac_srcdir=. if test -z "$ac_top_builddir"; then ac_top_srcdir=. else ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` fi ;; [\\/]* | ?:[\\/]* ) # Absolute path. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ;; *) # Relative path. ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_builddir$srcdir ;; esac # Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be # absolute. ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd` ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` { echo "$as_me:$LINENO: executing $ac_dest commands" >&5 echo "$as_me: executing $ac_dest commands" >&6;} case $ac_dest in depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` if (sed 1q $mf | fgrep 'generated by automake') > /dev/null 2>&1; then dirpart=`(dirname "$mf") 2>/dev/null || $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$mf" : 'X\(//\)[^/]' \| \ X"$mf" : 'X\(//\)$' \| \ X"$mf" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$mf" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` else continue fi grep '^DEP_FILES *= *[^ #]' < "$mf" > /dev/null || continue # Extract the definition of DEP_FILES from the Makefile without # running `make'. DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"` test -z "$DEPDIR" && continue # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n -e '/^U = / s///p' < "$mf"` test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR" # We invoke sed twice because it is the simplest approach to # changing $(DEPDIR) to its actual value in the expansion. for file in `sed -n -e ' /^DEP_FILES = .*\\\\$/ { s/^DEP_FILES = // :loop s/\\\\$// p n /\\\\$/ b loop p } /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`(dirname "$file") 2>/dev/null || $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$file" : 'X\(//\)[^/]' \| \ X"$file" : 'X\(//\)$' \| \ X"$file" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` { if $as_mkdir_p; then mkdir -p $dirpart/$fdir else as_dir=$dirpart/$fdir as_dirs= while test ! -d "$as_dir"; do as_dirs="$as_dir $as_dirs" as_dir=`(dirname "$as_dir") 2>/dev/null || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` done test ! -n "$as_dirs" || mkdir $as_dirs fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5 echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;} { (exit 1); exit 1; }; }; } # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done ;; esac done _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF { (exit 0); exit 0; } _ACEOF chmod +x $CONFIG_STATUS ac_clean_files=$ac_clean_files_save # configure is writing to config.log, and then calls config.status. # config.status does its own redirection, appending to config.log. # Unfortunately, on DOS this fails, as config.log is still kept open # by configure, so config.status won't be able to write to it; its # output is simply discarded. So we exec the FD to /dev/null, # effectively closing config.log, so it can be properly (re)opened and # appended to by config.status. When coming back to configure, we # need to make the FD available again. if test "$no_create" != yes; then ac_cs_success=: exec 5>/dev/null $SHELL $CONFIG_STATUS || ac_cs_success=false exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. $ac_cs_success || { (exit 1); exit 1; } fi qscan-1.2/configure.ac0000644000175000006270000000772607546762130010460 AC_PREREQ(2.50) AC_INIT AM_INIT_AUTOMAKE(qscan, 1.2) AC_CONFIG_SRCDIR(src/qscan.c) AM_CONFIG_HEADER(config.h) AC_SUBST(VERSION) ISODATE=`date +%Y-%m-%d` AC_SUBST(ISODATE) dnl Checks for programs. AC_PROG_INSTALL AC_PROG_CC AC_AIX AC_ISC_POSIX AC_PROG_CC_STDC AC_ARG_VAR(SWEEP,local path to the Sophos antivirus) sweep_possible_path="/var/qmail/bin:/usr/bin:/usr/local/bin:/bin:/opt/sav/bin:/usr/local/sav/bin" AC_PATH_PROG(SWEEP,sweep,,$sweep_possible_path) if test "x$ac_cv_path_SWEEP" = "x"; then AC_MSG_ERROR(sweep not found) fi CPPFLAGS="$CPPFLAGS -DSWEEP='\"$ac_cv_path_SWEEP\"'" AC_ARG_VAR(RIPMIME,local path to the the ripmime executable) ripmime_possible_path="/var/qmail/bin:/usr/bin:/usr/local/bin:/bin:/opt/ripmime/bin:/usr/local/ripmime/bin" AC_PATH_PROG(RIPMIME,ripmime,,$ripmime_possible_path) if test "x$ac_cv_path_RIPMIME" = "x"; then AC_MSG_ERROR(ripmime not found) fi CPPFLAGS="$CPPFLAGS -DRIPMIME='\"$ac_cv_path_RIPMIME\"'" AC_ARG_VAR(QMAIL_QUEUE,local path to the original qmail-queue program) qmail_queue_possible_path="/var/qmail/bin:/usr/bin:/usr/local/bin:/bin:/opt/qmail/bin:/usr/local/qmail/bin" AC_PATH_PROG(QMAIL_QUEUE,qmail-queue-old,,$qmail_queue_possible_path) if test "x$ac_cv_path_QMAIL_QUEUE" = "x"; then AC_MSG_ERROR(qmail-queue-old not found) fi CPPFLAGS="$CPPFLAGS -DQMAIL_QUEUE='\"$ac_cv_path_QMAIL_QUEUE\"'" CPPFLAGS="$CPPFLAGS -D_GNU_SOURCE=1 -I/usr/local/include" LDFLAGS="$LDFLAGS -L/usr/local/lib" dnl Checks for header files AC_HEADER_STDC AC_HEADER_STAT AC_HEADER_TIME AC_HEADER_DIRENT AC_HEADER_SYS_WAIT AC_CHECK_HEADERS(unistd.h string.h strings.h sys/param.h) AC_CHECK_HEADERS(sys/time.h sys/resource.h) AC_CHECK_HEADERS(stddef.h) AC_CHECK_HEADERS(stdarg.h varargs.h) dnl Checks for typedefs, structures, and compiler characteristics. AC_PROG_GCC_TRADITIONAL AC_C_INLINE AC_C_CONST AC_TYPE_MODE_T AC_TYPE_PID_T AC_TYPE_SIZE_T AC_STRUCT_TM AC_TYPE_SIGNAL AC_TYPE_UID_T AC_CHECK_TYPE(ssize_t, , [AC_DEFINE(ssize_t, long int, [ssize_t type])], [ #include #ifdef STDC_HEADERS # include # include #else # if HAVE_STDLIB_H # include # endif #endif #ifdef HAVE_UNISTD_H # include #endif #include ]) dnl Options AM_WITH_DMALLOC dnl Checks for library functions. AC_FUNC_ALLOCA AC_FUNC_STAT AC_FUNC_VPRINTF AC_CHECK_FUNCS(snprintf vsnprintf vfprintf) AC_CHECK_FUNCS(nanosleep usleep) dnl Custom checks AC_MSG_CHECKING(whether usleep returns something) AC_TRY_COMPILE([ #include #ifdef STDC_HEADERS # include # include #else # if HAVE_STDLIB_H # include # endif #endif #ifdef HAVE_UNISTD_H # include #endif #ifdef TIME_WITH_SYS_TIME # include # include #else # if HAVE_SYS_TIME_H # include # else # include # endif #endif ], [ return (int) usleep(50000UL); ], [ AC_DEFINE(USLEEP_RETURNS_INT, , [usleep returns an integer]) AC_MSG_RESULT(yes) ], [ AC_MSG_RESULT(probably nothing) ] ) AC_MSG_CHECKING(whether snprintf is C99 conformant) AC_TRY_RUN([ #include #ifdef STDC_HEADERS # include # include #else # if HAVE_STDLIB_H # include # endif #endif #ifdef HAVE_UNISTD_H # include #endif int main(void) { char buf[4]; (void) fprintf(fopen("conftestval", "wt"), "%d\n", (int) snprintf(buf, sizeof buf, "12345678")); return 0; } ], CONF_SNPRINTF_TYPE=`cat conftestval` ) AC_MSG_RESULT(done) if test "x$CONF_SNPRINTF_TYPE" = "x" ; then AC_MSG_WARN(your operating system doesn't implement snprintf) else AC_DEFINE_UNQUOTED(CONF_SNPRINTF_TYPE, $CONF_SNPRINTF_TYPE, [return value of an overflowed snprintf]) fi dnl Options AM_WITH_DMALLOC AC_ARG_WITH(concurrency, [AC_HELP_STRING([--with-concurrency],[Set max virus scanning concurrency])], [ if test "x$withval" != "x" ; then AC_DEFINE_UNQUOTED(SCAN_CONCURRENCY, $withval, [max scanning concurrency]) fi ]) dnl Output AC_CONFIG_FILES(Makefile src/Makefile) AC_OUTPUT qscan-1.2/install-sh0000755000175000006270000001267107507257261010172 #!/bin/sh # # install - install a program, script, or datafile # This comes from X11R5 (mit/util/scripts/install.sh). # # Copyright 1991 by the Massachusetts Institute of Technology # # Permission to use, copy, modify, distribute, and sell this software and its # documentation for any purpose is hereby granted without fee, provided that # the above copyright notice appear in all copies and that both that # copyright notice and this permission notice appear in supporting # documentation, and that the name of M.I.T. not be used in advertising or # publicity pertaining to distribution of the software without specific, # written prior permission. M.I.T. makes no representations about the # suitability of this software for any purpose. It is provided "as is" # without express or implied warranty. # # Calling this script install-sh is preferred over install.sh, to prevent # `make' implicit rules from creating a file called install from it # when there is no Makefile. # # This script is compatible with the BSD install script, but was written # from scratch. It can only install one file at a time, a restriction # shared with many OS's install programs. # set DOITPROG to echo to test this script # Don't use :- since 4.3BSD and earlier shells don't like it. doit="${DOITPROG-}" # put in absolute paths if you don't have them in your path; or use env. vars. mvprog="${MVPROG-mv}" cpprog="${CPPROG-cp}" chmodprog="${CHMODPROG-chmod}" chownprog="${CHOWNPROG-chown}" chgrpprog="${CHGRPPROG-chgrp}" stripprog="${STRIPPROG-strip}" rmprog="${RMPROG-rm}" mkdirprog="${MKDIRPROG-mkdir}" transformbasename="" transform_arg="" instcmd="$mvprog" chmodcmd="$chmodprog 0755" chowncmd="" chgrpcmd="" stripcmd="" rmcmd="$rmprog -f" mvcmd="$mvprog" src="" dst="" dir_arg="" while [ x"$1" != x ]; do case $1 in -c) instcmd="$cpprog" shift continue;; -d) dir_arg=true shift continue;; -m) chmodcmd="$chmodprog $2" shift shift continue;; -o) chowncmd="$chownprog $2" shift shift continue;; -g) chgrpcmd="$chgrpprog $2" shift shift continue;; -s) stripcmd="$stripprog" shift continue;; -t=*) transformarg=`echo $1 | sed 's/-t=//'` shift continue;; -b=*) transformbasename=`echo $1 | sed 's/-b=//'` shift continue;; *) if [ x"$src" = x ] then src=$1 else # this colon is to work around a 386BSD /bin/sh bug : dst=$1 fi shift continue;; esac done if [ x"$src" = x ] then echo "install: no input file specified" exit 1 else : fi if [ x"$dir_arg" != x ]; then dst=$src src="" if [ -d $dst ]; then instcmd=: chmodcmd="" else instcmd=$mkdirprog fi else # Waiting for this to be detected by the "$instcmd $src $dsttmp" command # might cause directories to be created, which would be especially bad # if $src (and thus $dsttmp) contains '*'. if [ -f $src -o -d $src ] then : else echo "install: $src does not exist" exit 1 fi if [ x"$dst" = x ] then echo "install: no destination specified" exit 1 else : fi # If destination is a directory, append the input filename; if your system # does not like double slashes in filenames, you may need to add some logic if [ -d $dst ] then dst="$dst"/`basename $src` else : fi fi ## this sed command emulates the dirname command dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` # Make sure that the destination directory exists. # this part is taken from Noah Friedman's mkinstalldirs script # Skip lots of stat calls in the usual case. if [ ! -d "$dstdir" ]; then defaultIFS=' ' IFS="${IFS-${defaultIFS}}" oIFS="${IFS}" # Some sh's can't handle IFS=/ for some reason. IFS='%' set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'` IFS="${oIFS}" pathcomp='' while [ $# -ne 0 ] ; do pathcomp="${pathcomp}${1}" shift if [ ! -d "${pathcomp}" ] ; then $mkdirprog "${pathcomp}" else : fi pathcomp="${pathcomp}/" done fi if [ x"$dir_arg" != x ] then $doit $instcmd $dst && if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else : ; fi && if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else : ; fi && if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else : ; fi && if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else : ; fi else # If we're going to rename the final executable, determine the name now. if [ x"$transformarg" = x ] then dstfile=`basename $dst` else dstfile=`basename $dst $transformbasename | sed $transformarg`$transformbasename fi # don't allow the sed command to completely eliminate the filename if [ x"$dstfile" = x ] then dstfile=`basename $dst` else : fi # Make a temp file name in the proper directory. dsttmp=$dstdir/#inst.$$# # Move or copy the file name to the temp name $doit $instcmd $src $dsttmp && trap "rm -f ${dsttmp}" 0 && # and set any options; do chmod last to preserve setuid bits # If any of these fail, we abort the whole thing. If we want to # ignore errors from any of these, just make sure not to ignore # errors from the above "$doit $instcmd $src $dsttmp" command. if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else :;fi && if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else :;fi && if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else :;fi && if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else :;fi && # Now rename the file to the real destination. $doit $rmcmd -f $dstdir/$dstfile && $doit $mvcmd $dsttmp $dstdir/$dstfile fi && exit 0 qscan-1.2/missing0000755000175000006270000002405007507257261007557 #! /bin/sh # Common stub for a few missing GNU programs while installing. # Copyright 1996, 1997, 1999, 2000 Free Software Foundation, Inc. # Originally by Fran,cois Pinard , 1996. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. if test $# -eq 0; then echo 1>&2 "Try \`$0 --help' for more information" exit 1 fi run=: # In the cases where this matters, `missing' is being run in the # srcdir already. if test -f configure.ac; then configure_ac=configure.ac else configure_ac=configure.in fi case "$1" in --run) # Try to run requested program, and just exit if it succeeds. run= shift "$@" && exit 0 ;; esac # If it does not exist, or fails to run (possibly an outdated version), # try to emulate it. case "$1" in -h|--h|--he|--hel|--help) echo "\ $0 [OPTION]... PROGRAM [ARGUMENT]... Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an error status if there is no known handling for PROGRAM. Options: -h, --help display this help and exit -v, --version output version information and exit --run try to run the given command, and emulate it if it fails Supported PROGRAM values: aclocal touch file \`aclocal.m4' autoconf touch file \`configure' autoheader touch file \`config.h.in' automake touch all \`Makefile.in' files bison create \`y.tab.[ch]', if possible, from existing .[ch] flex create \`lex.yy.c', if possible, from existing .c help2man touch the output file lex create \`lex.yy.c', if possible, from existing .c makeinfo touch the output file tar try tar, gnutar, gtar, then tar without non-portable flags yacc create \`y.tab.[ch]', if possible, from existing .[ch]" ;; -v|--v|--ve|--ver|--vers|--versi|--versio|--version) echo "missing 0.4 - GNU automake" ;; -*) echo 1>&2 "$0: Unknown \`$1' option" echo 1>&2 "Try \`$0 --help' for more information" exit 1 ;; aclocal*) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 fi echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." touch aclocal.m4 ;; autoconf) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 fi echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." touch configure ;; autoheader) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 fi echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified \`acconfig.h' or \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` test -z "$files" && files="config.h" touch_files= for f in $files; do case "$f" in *:*) touch_files="$touch_files "`echo "$f" | sed -e 's/^[^:]*://' -e 's/:.*//'`;; *) touch_files="$touch_files $f.in";; esac done touch $touch_files ;; automake*) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 fi echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." find . -type f -name Makefile.am -print | sed 's/\.am$/.in/' | while read f; do touch "$f"; done ;; autom4te) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 fi echo 1>&2 "\ WARNING: \`$1' is needed, and you do not seem to have it handy on your system. You might have modified some files without having the proper tools for further handling them. You can get \`$1Help2man' as part of \`Autoconf' from any GNU archive site." file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'` test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'` if test -f "$file"; then touch $file else test -z "$file" || exec >$file echo "#! /bin/sh" echo "# Created by GNU Automake missing as a replacement of" echo "# $ $@" echo "exit 0" chmod +x $file exit 1 fi ;; bison|yacc) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified a \`.y' file. You may need the \`Bison' package in order for those modifications to take effect. You can get \`Bison' from any GNU archive site." rm -f y.tab.c y.tab.h if [ $# -ne 1 ]; then eval LASTARG="\${$#}" case "$LASTARG" in *.y) SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` if [ -f "$SRCFILE" ]; then cp "$SRCFILE" y.tab.c fi SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` if [ -f "$SRCFILE" ]; then cp "$SRCFILE" y.tab.h fi ;; esac fi if [ ! -f y.tab.h ]; then echo >y.tab.h fi if [ ! -f y.tab.c ]; then echo 'main() { return 0; }' >y.tab.c fi ;; lex|flex) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified a \`.l' file. You may need the \`Flex' package in order for those modifications to take effect. You can get \`Flex' from any GNU archive site." rm -f lex.yy.c if [ $# -ne 1 ]; then eval LASTARG="\${$#}" case "$LASTARG" in *.l) SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` if [ -f "$SRCFILE" ]; then cp "$SRCFILE" lex.yy.c fi ;; esac fi if [ ! -f lex.yy.c ]; then echo 'main() { return 0; }' >lex.yy.c fi ;; help2man) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 fi echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified a dependency of a manual page. You may need the \`Help2man' package in order for those modifications to take effect. You can get \`Help2man' from any GNU archive site." file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` if test -z "$file"; then file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'` fi if [ -f "$file" ]; then touch $file else test -z "$file" || exec >$file echo ".ab help2man is required to generate this page" exit 1 fi ;; makeinfo) if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then # We have makeinfo, but it failed. exit 1 fi echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified a \`.texi' or \`.texinfo' file, or any other file indirectly affecting the aspect of the manual. The spurious call might also be the consequence of using a buggy \`make' (AIX, DU, IRIX). You might want to install the \`Texinfo' package or the \`GNU make' package. Grab either from any GNU archive site." file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` if test -z "$file"; then file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file` fi touch $file ;; tar) shift if test -n "$run"; then echo 1>&2 "ERROR: \`tar' requires --run" exit 1 fi # We have already tried tar in the generic part. # Look for gnutar/gtar before invocation to avoid ugly error # messages. if (gnutar --version > /dev/null 2>&1); then gnutar ${1+"$@"} && exit 0 fi if (gtar --version > /dev/null 2>&1); then gtar ${1+"$@"} && exit 0 fi firstarg="$1" if shift; then case "$firstarg" in *o*) firstarg=`echo "$firstarg" | sed s/o//` tar "$firstarg" ${1+"$@"} && exit 0 ;; esac case "$firstarg" in *h*) firstarg=`echo "$firstarg" | sed s/h//` tar "$firstarg" ${1+"$@"} && exit 0 ;; esac fi echo 1>&2 "\ WARNING: I can't seem to be able to run \`tar' with the given arguments. You may want to install GNU tar or Free paxutils, or check the command line arguments." exit 1 ;; *) echo 1>&2 "\ WARNING: \`$1' is needed, and you do not seem to have it handy on your system. You might have modified some files without having the proper tools for further handling them. Check the \`README' file, it often tells you about the needed prerequirements for installing this package. You may also peek at any GNU archive site, in case some other package would contain this missing \`$1' program." exit 1 ;; esac exit 0 qscan-1.2/mkinstalldirs0000755000175000006270000000350407507257261010767 #! /bin/sh # mkinstalldirs --- make directory hierarchy # Author: Noah Friedman # Created: 1993-05-16 # Public domain # $Id: mkinstalldirs,v 1.13 1999/01/05 03:18:55 bje Exp $ errstatus=0 dirmode="" usage="\ Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..." # process command line arguments while test $# -gt 0 ; do case "${1}" in -h | --help | --h* ) # -h for help echo "${usage}" 1>&2; exit 0 ;; -m ) # -m PERM arg shift test $# -eq 0 && { echo "${usage}" 1>&2; exit 1; } dirmode="${1}" shift ;; -- ) shift; break ;; # stop option processing -* ) echo "${usage}" 1>&2; exit 1 ;; # unknown option * ) break ;; # first non-opt arg esac done for file do if test -d "$file"; then shift else break fi done case $# in 0) exit 0 ;; esac case $dirmode in '') if mkdir -p -- . 2>/dev/null; then echo "mkdir -p -- $*" exec mkdir -p -- "$@" fi ;; *) if mkdir -m "$dirmode" -p -- . 2>/dev/null; then echo "mkdir -m $dirmode -p -- $*" exec mkdir -m "$dirmode" -p -- "$@" fi ;; esac for file do set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'` shift pathcomp= for d do pathcomp="$pathcomp$d" case "$pathcomp" in -* ) pathcomp=./$pathcomp ;; esac if test ! -d "$pathcomp"; then echo "mkdir $pathcomp" mkdir "$pathcomp" || lasterr=$? if test ! -d "$pathcomp"; then errstatus=$lasterr else if test ! -z "$dirmode"; then echo "chmod $dirmode $pathcomp" lasterr="" chmod "$dirmode" "$pathcomp" || lasterr=$? if test ! -z "$lasterr"; then errstatus=$lasterr fi fi fi fi pathcomp="$pathcomp/" done done exit $errstatus # Local Variables: # mode: shell-script # sh-indentation: 3 # End: # mkinstalldirs ends here qscan-1.2/src/0000777000175000006270000000000007546763746007047 5qscan-1.2/src/Makefile.am0000644000175000006270000000022307546574321011001 sbin_PROGRAMS = \ qscan qscan_SOURCES = \ fakesnprintf.h \ fakesnprintf.c \ mysnprintf.c \ mysnprintf.h \ qscan.c \ qscan.h \ qscan_p.h qscan-1.2/src/Makefile.in0000644000175000006270000002061607546762453011027 # Makefile.in generated by automake 1.6.1 from Makefile.am. # @configure_input@ # Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 # Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ SHELL = @SHELL@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ prefix = @prefix@ exec_prefix = @exec_prefix@ bindir = @bindir@ sbindir = @sbindir@ libexecdir = @libexecdir@ datadir = @datadir@ sysconfdir = @sysconfdir@ sharedstatedir = @sharedstatedir@ localstatedir = @localstatedir@ libdir = @libdir@ infodir = @infodir@ mandir = @mandir@ includedir = @includedir@ oldincludedir = /usr/include pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = .. ACLOCAL = @ACLOCAL@ AUTOCONF = @AUTOCONF@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_DATA = @INSTALL_DATA@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_HEADER = $(INSTALL_DATA) transform = @program_transform_name@ NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : EXEEXT = @EXEEXT@ OBJEXT = @OBJEXT@ PATH_SEPARATOR = @PATH_SEPARATOR@ AMTAR = @AMTAR@ AWK = @AWK@ CC = @CC@ DEPDIR = @DEPDIR@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ ISODATE = @ISODATE@ PACKAGE = @PACKAGE@ QMAIL_QUEUE = @QMAIL_QUEUE@ RIPMIME = @RIPMIME@ STRIP = @STRIP@ SWEEP = @SWEEP@ VERSION = @VERSION@ am__include = @am__include@ am__quote = @am__quote@ install_sh = @install_sh@ sbin_PROGRAMS = \ qscan qscan_SOURCES = \ fakesnprintf.h \ fakesnprintf.c \ mysnprintf.c \ mysnprintf.h \ qscan.c \ qscan.h \ qscan_p.h subdir = src mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = sbin_PROGRAMS = qscan$(EXEEXT) PROGRAMS = $(sbin_PROGRAMS) am_qscan_OBJECTS = fakesnprintf.$(OBJEXT) mysnprintf.$(OBJEXT) \ qscan.$(OBJEXT) qscan_OBJECTS = $(am_qscan_OBJECTS) qscan_LDADD = $(LDADD) qscan_DEPENDENCIES = qscan_LDFLAGS = DEFS = @DEFS@ DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) CPPFLAGS = @CPPFLAGS@ LDFLAGS = @LDFLAGS@ LIBS = @LIBS@ depcomp = am__depfiles_maybe = COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ CFLAGS = @CFLAGS@ DIST_SOURCES = $(qscan_SOURCES) DIST_COMMON = Makefile.am Makefile.in SOURCES = $(qscan_SOURCES) all: all-am .SUFFIXES: .SUFFIXES: .c .o .obj $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.ac $(ACLOCAL_M4) cd $(top_srcdir) && \ $(AUTOMAKE) --gnu --ignore-deps src/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) sbinPROGRAMS_INSTALL = $(INSTALL_PROGRAM) install-sbinPROGRAMS: $(sbin_PROGRAMS) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(sbindir) @list='$(sbin_PROGRAMS)'; for p in $$list; do \ p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ if test -f $$p \ ; then \ p1=`echo "$$p1" | sed -e 's,^.*/,,'`; \ f=`echo $$p1|sed '$(transform);s/$$/$(EXEEXT)/'`; \ echo " $(INSTALL_PROGRAM_ENV) $(sbinPROGRAMS_INSTALL) $$p $(DESTDIR)$(sbindir)/$$f"; \ $(INSTALL_PROGRAM_ENV) $(sbinPROGRAMS_INSTALL) $$p $(DESTDIR)$(sbindir)/$$f; \ else :; fi; \ done uninstall-sbinPROGRAMS: @$(NORMAL_UNINSTALL) @list='$(sbin_PROGRAMS)'; for p in $$list; do \ f=`echo $$p|sed 's/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ f=`echo "$$f" | sed -e 's,^.*/,,'`; \ echo " rm -f $(DESTDIR)$(sbindir)/$$f"; \ rm -f $(DESTDIR)$(sbindir)/$$f; \ done clean-sbinPROGRAMS: -test -z "$(sbin_PROGRAMS)" || rm -f $(sbin_PROGRAMS) qscan$(EXEEXT): $(qscan_OBJECTS) $(qscan_DEPENDENCIES) @rm -f qscan$(EXEEXT) $(LINK) $(qscan_LDFLAGS) $(qscan_OBJECTS) $(qscan_LDADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) core *.core distclean-compile: -rm -f *.tab.c .c.o: $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$< .c.obj: $(COMPILE) -c `cygpath -w $<` uninstall-info-am: ETAGS = etags ETAGSFLAGS = tags: TAGS ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ mkid -fID $$unique TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(ETAGS_ARGS)$$tags$$unique" \ || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) top_distdir = .. distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) distdir: $(DISTFILES) @for file in $(DISTFILES); do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkinstalldirs) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(PROGRAMS) installdirs: $(mkinstalldirs) $(DESTDIR)$(sbindir) install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]* maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-sbinPROGRAMS mostlyclean-am distclean: distclean-am distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags dvi: dvi-am dvi-am: info: info-am info-am: install-data-am: install-exec-am: install-sbinPROGRAMS install-info: install-info-am install-man: installcheck-am: maintainer-clean: maintainer-clean-am maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-compile mostlyclean-generic uninstall-am: uninstall-info-am uninstall-sbinPROGRAMS .PHONY: GTAGS all all-am check check-am clean clean-generic \ clean-sbinPROGRAMS distclean distclean-compile \ distclean-generic distclean-tags distdir dvi dvi-am info \ info-am install install-am install-data install-data-am \ install-exec install-exec-am install-info install-info-am \ install-man install-sbinPROGRAMS install-strip installcheck \ installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-compile \ mostlyclean-generic tags uninstall uninstall-am \ uninstall-info-am uninstall-sbinPROGRAMS # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: qscan-1.2/src/fakesnprintf.h0000644000175000006270000000113607546574321011614 #ifndef __FAKESNPRINTF_H__ #define __FAKESNPRINTF_H__ 1 #if !defined(HAVE_SNPRINTF) || !defined(HAVE_VSNPRINTF) int fakesnprintf_vsnprintf(char * const str_, const size_t size_, const char *format, va_list va); int fakesnprintf_snprintf(char * const str, const size_t size, const char * const format, ...); # define snprintf fakesnprintf_snprintf # define vsnprintf fakesnprintf_vsnprintf # ifdef CONF_SNPRINTF_TYPE # undef CONF_SNPRINTF_TYPE # endif # define CONF_SNPRINTF_TYPE 2 #endif #endif /* FAKESNPRINTF_H */ qscan-1.2/src/fakesnprintf.c0000644000175000006270000002452407546574321011615 /* * snprintf() / vsnprintf() re-implementation by Frank Denis * * These functions understand : * - characters ("%c") . * - space padding ("%3d", "%-3s") . * - zero padding ("%04d") . * - explicit '+' ("%+d", "%+3.2f") . * - length restrictions ("%.30s", "%-42.30s", "%.4d") . * - int, long, long long types ("%lld", "%-3ld", "%i") . * - unsigned int, long, long long types ("%llu", "%-3lu", "%u") . * - hex and octal unsigned types ("%llX", "%04x", "%-3o") . * - double and long double types ("%f", "%Lf") . * - floating point frac restrictions ("%.2f") . * - combinations of everything ("%-8.5llo") . * * Nothing more. Return value is if an overflow occured, or the * copied size if no overflow occured (mostly compatible with C99 * snprintf() behavior, except that it doesn't return any value larger * than ). * * These functions are portable, they are twice faster than their BSD and GNU * implementations, and they don't tamper with errno. But they only know * a limited subset of what a full-implementation is supposed to do. * * It's enough for Pure-FTPd, though. */ #include #include "qscan.h" #ifdef WITH_DMALLOC # include #endif #if !defined(HAVE_SNPRINTF) || !defined(HAVE_VSNPRINTF) /* * add a string to the buffer * \param zero if this is non-zero, we pad with zeroes, else we pad * with a blank. * \param maxlen sets the maximum size of the string to be added */ static void fakesnprintf_addstr(char **str, size_t *size, const char *pnt, size_t maxlen, size_t padlen, unsigned char zero, unsigned char minuspad) { size_t maxlenc; /* prepare to cut off string if longer than maxlen */ maxlenc = strlen(pnt); if (maxlen > 0U && maxlen < maxlenc) { maxlenc = maxlen; } if (padlen > 0U && minuspad == 0U && padlen > maxlenc) { size_t maxlenp = padlen - maxlenc; if (maxlenp > *size) { maxlenp = *size; } if (maxlenp > 0U) { memset(*str, zero != 0 ? '0' : ' ', maxlenp); (*size) -= maxlenp; (*str) += maxlenp; } } if (maxlenc > *size) { maxlenc = *size; } if (maxlenc > 0U) { memcpy(*str, pnt, maxlenc); (*size) -= maxlenc; (*str) += maxlenc; } if (padlen > 0U && minuspad > 0U && padlen > maxlenc) { size_t maxlenp = padlen - maxlenc; if (maxlenp > *size) { maxlenp = *size; } if (maxlenp > 0U) { memset(*str, ' ', maxlenp); (*size) -= maxlenp; (*str) += maxlenp; } } } int fakesnprintf_vsnprintf(char * const str_, const size_t size_, const char *format, va_list va) { char *str; size_t size; size_t maxlen; size_t padlen; unsigned char longs; unsigned char zero; unsigned char minuspad; unsigned char hasmaxlen; unsigned char plussign; str = str_; size = size_; str_[size_ - 1U] = 1; while (size > 0U && *format != 0) { if (*format != '%') { *str++ = *format++; size--; continue; } longs = 0U; zero = 0U; minuspad = 0U; maxlen = 0U; padlen = 0U; hasmaxlen = 0U; plussign = 0U; for (;;) { breakpoint_nextspecial_inc: format++; breakpoint_nextspecial_noinc: switch (*format) { case 0: goto breakpoint_end; case '%': *str++ = '%'; size--; goto breakpoint_nextspecial_inc; case 'c': { int val; val = va_arg(va, int); *str++ = (char) val; size--; goto breakpoint_nextspecial_inc; } case 'l': case 'L': longs++; goto breakpoint_nextspecial_inc; case '0': zero++; goto breakpoint_nextspecial_inc; case '.': format++; hasmaxlen = 1U; while ((unsigned char) *format >= '0' && (unsigned char) *format <= '9') { maxlen *= 10U; maxlen += (*format - '0'); format++; } goto breakpoint_nextspecial_noinc; case '1': case '2': case '3': case '4': case '5': case '6': case '7': case '8': case '9': do { padlen *= 10U; padlen += *format - '0'; format++; } while ((unsigned char) *format >= '0' && (unsigned char) *format <= '9'); goto breakpoint_nextspecial_noinc; case '-': minuspad++; format++; goto breakpoint_nextspecial_noinc; case '+': plussign++; format++; goto breakpoint_nextspecial_noinc; case 's': { const char *pnt; pnt = va_arg(va, const char *); if (pnt == NULL) { pnt = ""; } fakesnprintf_addstr(&str, &size, pnt, maxlen, padlen, zero, minuspad); goto breakpoint_next; } case 'u': case 'o': case 'x': case 'X': { unsigned long long val; char vals[256]; char *valspnt = vals + sizeof vals; const char *basics; unsigned int base; switch (longs) { case 2: val = va_arg(va, unsigned long long); break; case 1: val = (unsigned long long) va_arg(va, unsigned long); break; default: val = (unsigned long long) va_arg(va, unsigned int); } basics = "0123456789abcdef"; switch (*format) { case 'o': base = 8U; break; case 'X': basics = "0123456789ABCDEF"; case 'x': base = 16U; break; default: base = 10U; } *--valspnt = 0; do { *--valspnt = basics[val % base]; val /= base; } while (valspnt != &vals[0] && val > 0ULL); fakesnprintf_addstr(&str, &size, valspnt, maxlen, padlen, zero, minuspad); goto breakpoint_next; } case 'd': case 'i': { long long val; unsigned char minussign = 0U; char vals[256]; char *valspnt = vals + sizeof vals; switch (longs) { case 2: val = va_arg(va, long long); break; case 1: val = (long long) va_arg(va, long); break; default: val = (long long) va_arg(va, int); } if (val < 0LL) { minussign++; val = -val; } *--valspnt = 0; do { *--valspnt = "0123456789"[val % 10LL]; val /= 10LL; } while (valspnt != &vals[1] && val > 0LL); if (minussign != 0) { *--valspnt = '-'; } else if (plussign != 0) { *--valspnt = '+'; } fakesnprintf_addstr(&str, &size, valspnt, maxlen, padlen, zero, minuspad); goto breakpoint_next; } case 'e': case 'E': case 'f': case 'F': case 'g': case 'G': { unsigned int nfrac = 6U; long double val; unsigned long long vali; unsigned char minussign = 0U; char vals[512]; char *valspnt = vals + sizeof vals / 2U; char *valsleft; if (longs != 0) { val = va_arg(va, long double); } else { val = va_arg(va, double); } if (val < 0.0L) { minussign++; val = -val; } vali = (unsigned long long) val; do { *--valspnt = '0' + vali % 10ULL; vali /= 10ULL; } while (valspnt != &vals[1] && vali > 0ULL); if (minussign != 0) { *--valspnt = '-'; } else if (plussign != 0) { *--valspnt = '+'; } valsleft = valspnt; valspnt = vals + sizeof vals / 2U; if (maxlen > (sizeof vals / 2U) - 3U) { nfrac = (sizeof vals / 2U) - 3U; } else if (hasmaxlen != 0U) { nfrac = maxlen; } if (nfrac > 0U) { *valspnt++ = '.'; } while (nfrac > 0U) { nfrac--; val *= 10.0L; *valspnt++ = '0' + (((unsigned long long) val) % 10U); } *valspnt = 0; fakesnprintf_addstr(&str, &size, valsleft, sizeof vals, padlen, zero, minuspad); goto breakpoint_next; } } } breakpoint_next: format++; } breakpoint_end: if (str_[size_ - 1U] != 1) { str_[size_ - 1U] = 0; return (int) size_; } *str = 0; return (int) (size_ - size); } int fakesnprintf_snprintf(char * const str, const size_t size, const char * const format, ...) { int ret; va_list va; va_start(va, format); ret = fakesnprintf_vsnprintf(str, size, format, va); va_end(va); return ret; } #endif /* !HAVE_SNPRINTF */ qscan-1.2/src/mysnprintf.c0000644000175000006270000000133107546574321011323 #include #include #ifdef STDC_HEADERS # include # include # include #else # ifdef HAVE_STDLIB_H # include # endif #endif #ifdef HAVE_INTTYPES_H # include #endif #ifdef HAVE_UNISTD_H # include #endif #include #include "mysnprintf.h" #ifdef WITH_DMALLOC # include #endif #ifndef SNPRINTF_IS_NOT_BUGGY int workaround_snprintf(char *str, size_t size, const char *format, ...) { int v; int r = 0; va_list va; va_start(va, format); v = vsnprintf(str, size, format, va); if (v < 0 || (ssize_t) v >= (ssize_t) size) { r--; } va_end(va); return r; } #endif qscan-1.2/src/mysnprintf.h0000644000175000006270000000127007546574321011332 #ifndef __MYSNPRINTF_H__ #define __MYSNPRINTF_H__ 1 int workaround_snprintf(char *str, size_t size, const char *format, ...); #ifndef HAVE_SNPRINTF # include "fakesnprintf.h" #endif #ifdef CONF_SNPRINTF_TYPE # if CONF_SNPRINTF_TYPE > 0 # define SNPRINTF_C99 1 # else # define SNPRINTF_OLD 1 # endif #else # define SNPRINTF_C99 2 #endif #ifdef SNPRINTF_IS_NOT_BUGGY /* SNCHECK() returns 0 if a *snprintf() call was safe */ # ifdef SNPRINTF_C99 # define SNCHECK(CALL, SIZE) ((CALL) >= ((int) (SIZE))) # else # define SNCHECK(CALL, SIZE) ((CALL) < 0) # endif #else /* Slow wrapper, but it works around totally buggy libc's */ # define SNCHECK(CALL, SIZE) (workaround_ ## CALL) #endif #endif qscan-1.2/src/qscan.c0000644000175000006270000004632507546762165010240 /* * QScan virus filter for Qmail/Sophos antivirus * Jedi/Sector One */ #include #include "qscan.h" #include "qscan_p.h" #ifdef WITH_DMALLOC # include #endif static void write_log(const int priority, const char * const format, ...) { va_list args; va_start(args, format); openlog("qscan", LOG_NDELAY | LOG_PID, LOG_MAIL); vsyslog(priority, format, args); closelog(); va_end(args); } static void perror_log(const char * const msg) { write_log(LOG_ERR, "%s : %s", msg, strerror(errno)); } static int spawn_ripmime(void) { if (pipe(ripmime_pipe) != 0) { perror_log("pipe"); return -1; } if ((ripmime_pid = fork()) == (pid_t) -1) { perror_log("fork"); (void) close(ripmime_pipe[0]); (void) close(ripmime_pipe[1]); return -1; } if (ripmime_pid == (pid_t) 0) { if (close(ripmime_pipe[1]) != 0) { perror_log("close"); exit(EXIT_FAILURE); } if (ripmime_pipe[0] != 0) { if (dup2(ripmime_pipe[0], 0) == -1) { perror_log("dup2"); exit(EXIT_FAILURE); } if (close(ripmime_pipe[0]) != 0) { perror_log("close"); exit(EXIT_FAILURE); } } (void) execlp(RIPMIME, RIPMIME, RIPMIME_ARGS, ripmime_destdir, (char *) NULL); perror_log("execlp"); exit(EXIT_FAILURE); } if (close(ripmime_pipe[0]) != 0) { perror_log("close"); return -1; } return 0; } static int spawn_qq(void) { if (ripmime_pid <= (pid_t) 0) { perror_log("need ripmime before qq"); return -1; } if (pipe(qq_pipe) != 0) { perror_log("pipe"); return -1; } if (pipe(qq_pipe_envelope) != 0) { perror_log("pipe"); return -1; } if ((qq_pid = fork()) == (pid_t) -1) { perror_log("fork"); (void) close(qq_pipe[0]); (void) close(qq_pipe[1]); (void) close(qq_pipe_envelope[0]); (void) close(qq_pipe_envelope[1]); return -1; } if (qq_pid == (pid_t) 0) { if (close(ripmime_pipe[1]) != 0) { perror_log("close"); exit(EXIT_FAILURE); } if (close(qq_pipe[1]) != 0) { perror_log("close"); exit(EXIT_FAILURE); } if (qq_pipe[0] != 0) { if (dup2(qq_pipe[0], 0) == -1) { perror_log("dup2"); exit(EXIT_FAILURE); } if (close(qq_pipe[0]) != 0) { perror_log("close"); exit(EXIT_FAILURE); } } if (close(qq_pipe_envelope[1]) != 0) { perror_log("close"); exit(EXIT_FAILURE); } if (qq_pipe_envelope[0] != 1) { if (dup2(qq_pipe_envelope[0], 1) == -1) { perror_log("dup2"); exit(EXIT_FAILURE); } (void) close(qq_pipe_envelope[1]); } (void) execlp(QMAIL_QUEUE, QMAIL_QUEUE, (char *) NULL); perror_log("execlp"); exit(EXIT_FAILURE); } if (close(qq_pipe[0]) != 0) { perror_log("close"); return -1; } return 0; } static int find_concurrency(void) { DIR *dir; const struct dirent *entry; int concurrency = 0; if ((dir = opendir(RIPMIME_DESTDIR_BASE)) == NULL) { perror_log("unable to opendir() the ripmime base directory"); return -1; } while ((entry = readdir(dir)) != NULL) { if (entry->d_name == NULL || *(entry->d_name) == '.') { continue; } concurrency++; if (concurrency >= INT_MAX) { break; } } if (closedir(dir) != 0) { perror_log("unable to closedir() the ripmime base directory"); return -1; } return concurrency; } static int cleanup_destdir(void) { DIR *dir; const struct dirent *entry; const char *found; int ret = 0; if (chdir(ripmime_destdir) != 0) { perror_log("unable to chdir to ripmime_destdir"); return -1; } if ((dir = opendir(".")) == NULL) { perror_log("unable to opendir() ripmime_destdir"); return -1; } while ((entry = readdir(dir)) != NULL) { if ((found = entry->d_name) == NULL || (found[0] == '.' && (found[1] == 0 || (found[1] == '.' && found[2] == 0)))) { continue; } if (unlink(found) != 0) { ret = -1; } } if (closedir(dir) != 0) { perror_log("unable to closedir() ripmime_destdir"); return -1; } return ret; } static int has_attachments(void) { DIR *dir; const struct dirent *entry; const char *found; struct stat st; int ret = 0; if (chdir(ripmime_destdir) != 0) { perror_log("unable to chdir() to ripmime_destdir"); return -1; } if ((dir = opendir(".")) == NULL) { perror_log("unable to opendir() ripmime_destdir"); return -1; } while ((entry = readdir(dir)) != NULL) { if ((found = entry->d_name) == NULL || (found[0] == '.' && (found[1] == 0 || (found[1] == '.' && found[2] == 0)))) { continue; } if (lstat(found, &st) != 0) { write_log(LOG_ERR, "unable to lstat [%s]", found); ret = -1; } else if (!S_ISREG(st.st_mode) || (st.st_mode & S_IRUSR) == (mode_t) 0) { write_log(LOG_ERR, "bad file [%s] to scan", found); if (unlink(found) != 0) { perror_log("unable to unlink a bad file"); } ret = -1; } else if (ret >= 0 && ret < INT_MAX) { ret++; } } if (closedir(dir) != 0) { perror_log("unable to closedir() ripmime_destdir"); return -1; } return ret; } static void wait_everybody_and_die(const int ret) { int status; pid_t pid; if (*ripmime_destdir != 0) { if (cleanup_destdir() != 0) { perror_log("error while cleaning up destdir before dying"); } if (rmdir(ripmime_destdir) != 0) { perror_log("error while removing destdir before dying"); } } if (ripmime_pipe[1] > 1) { (void) close(ripmime_pipe[1]); } if (qq_pipe[1] > 1) { (void) close(qq_pipe[1]); } if (qq_pipe_envelope[1] > 1) { (void) close(qq_pipe_envelope[1]); } if (av_pipe[0] > 1) { (void) close(av_pipe[0]); } (void) close(0); (void) close(1); for(;;) { if ((pid = wait(&status)) == (pid_t) -1 && errno != EINTR) { exit(ret); } } } static int spawn_antivirus(char ** const foundvirus) { char line[AV_LINE_MAX]; FILE *avfp; int status; pid_t pid; int ret = 0; if (foundvirus == NULL) { perror_log("foundvirus is a NULL pointer"); return -1; } *foundvirus = NULL; if (pipe(av_pipe) != 0) { perror_log("pipe"); return -1; } if ((av_pid = fork()) == (pid_t) -1) { perror_log("fork"); (void) close(av_pipe[0]); (void) close(av_pipe[1]); return -1; } if (av_pid == (pid_t) 0) { if (av_pipe[1] != 1) { if (dup2(av_pipe[1], 1) == -1) { perror_log("dup2"); exit(EXIT_FAILURE); } if (close(av_pipe[1]) != 0) { perror_log("close"); exit(EXIT_FAILURE); } } if (close(av_pipe[0]) != 0 || close(qq_pipe[1]) != 0 || close(qq_pipe_envelope[1]) != 0) { perror_log("close"); exit(EXIT_FAILURE); } if (chdir(ripmime_destdir) != 0) { perror_log("ripmime_destdir vanished, won't scan"); exit(EXIT_FAILURE); } (void) nice(SWEEP_NICE); (void) alarm(SWEEP_TIMEOUT); (void) execlp(SWEEP, SWEEP, SWEEP_ARGS, ripmime_destdir, (char *) NULL); perror_log("execlp"); exit(EXIT_FAILURE); } if (close(av_pipe[1]) != 0) { perror_log("close"); wait_everybody_and_die(99); } if ((avfp = fdopen(av_pipe[0], "r")) == NULL) { perror_log("fdopen"); wait_everybody_and_die(99); } while (fgets(line, (int) sizeof line, avfp) != NULL) { if (strncmp(SWEEP_VIRUS_PREFIX, line, sizeof SWEEP_VIRUS_PREFIX - (size_t) 1U) == 0) { register char *crlf; if (ret < INT_MAX) { ret++; } if (*foundvirus != NULL) { continue; } while ((crlf = strrchr(line, '\n')) != NULL || (crlf = strrchr(line, '\r')) != NULL) { *crlf = 0; } *foundvirus = strdup(line + sizeof SWEEP_VIRUS_PREFIX - (size_t) 1U); } } if (fclose(avfp) != 0) { perror_log("close"); } (void) close(av_pipe[0]); while ((pid = wait(&status)) == (pid_t) -1 && errno == EINTR); if (pid != av_pid) { if (close(qq_pipe[1]) != 0) { perror_log("close qq pipe"); } if (close(qq_pipe_envelope[1]) != 0) { perror_log("close envelope pipe"); } if (pid == qq_pid) { perror_log("we were waiting for the scanner to die, qq died first"); } else { perror_log("unexpected pid died"); } while ((pid = wait(&status)) == (pid_t) -1 && errno == EINTR); if (pid == av_pid) { perror_log("we were waiting for qq to die, but scanner died"); } else { perror_log("unexpected pid died"); } wait_everybody_and_die(99); } return ret; } static void delay_seconds(const time_t seconds) { #ifdef HAVE_NANOSLEEP struct timespec ts; ts.tv_sec = seconds; ts.tv_nsec = 0L; (void) nanosleep(&ts, NULL); #elif defined(HAVE_USLEEP) # ifdef USLEEP_RETURNS_INT if (usleep((unsigned long) seconds * 1000000UL) != 0) { if (errno == EINVAL) # endif { unsigned long wr = (unsigned long) seconds; do { (void) usleep(999999UL); wr--; } while (wr > 0UL); } # ifdef USLEEP_RETURNS_INT } # endif #else (void) sleep((unsigned int) seconds); #endif } static int viruscan_destdir(void) { char *foundvirus; int nb_attachments; int avret; int ret = 0; int tries = SCAN_MAX_RETRIES; if ((nb_attachments = has_attachments()) < 0) { perror_log("error while checking for attachments"); return -1; } if (nb_attachments == 0) { if (rmdir(ripmime_destdir) != 0) { perror_log("unable to remove ripmime_destdir, supposed to be empty"); if (cleanup_destdir() != 0) { perror_log("tried to cleanup destdir, but still got troubles"); } if (rmdir(ripmime_destdir) != 0) { perror_log("last chance to unlink ripmime_destdir failed"); } } *ripmime_destdir = 0; return 0; } while (find_concurrency() >= SCAN_CONCURRENCY) { if (tries <= 0) { write_log(LOG_INFO, "max scanning concurrency reached, " "intentionnaly delaying"); ret = -1; goto clean; } tries--; delay_seconds((time_t) SCAN_DELAY_BETWEEN_RETRIES); } if ((avret = spawn_antivirus(&foundvirus)) < 0) { perror_log("antivirus failure"); ret = -1; goto clean; } else if (avret > 0) { write_log(LOG_INFO, "%s in a mail from [%s]", foundvirus, getenv("TCPREMOTEIP")); if (avret > 1) { write_log(LOG_INFO, "%d other virus %s found in the same mail from [%s]", avret - 1, avret > 2 ? "were" : "was", getenv("TCPREMOTEIP")); } ret = 1; } clean: if (cleanup_destdir() != 0) { perror_log("destdir cleanup after virus checking failed"); } if (rmdir(ripmime_destdir) != 0) { perror_log("unlinking ripmime_destdir failed after virus checking"); } *ripmime_destdir = 0; return ret; } static int create_destdir_name(void) { (void) snprintf(ripmime_destdir, sizeof ripmime_destdir, RIPMIME_DESTDIR_BASE "/%lu_%lu", (unsigned long) now, (unsigned long) getpid()); return 0; } static int create_destdir(void) { if (create_destdir_name() != 0) { perror_log("unable to create the destdir name"); return -1; } if (mkdir(ripmime_destdir, (mode_t) 0700) != 0) { if (chdir(ripmime_destdir) != 0) { perror_log("unable to create/access ripmime_destdir"); return -1; } if (cleanup_destdir() != 0) { perror_log("unable to clean up destdir"); if (rmdir(ripmime_destdir) != 0) { perror_log("unable to remote destdir"); } *ripmime_destdir = 0; return -1; } } return 0; } static int wait_ripmime(void) { int status; pid_t pid; while ((pid = wait(&status)) == (pid_t) -1 && errno == EINTR); if (pid != ripmime_pid) { if (close(qq_pipe[1]) != 0) { perror_log("close qq pipe"); } if (close(qq_pipe_envelope[1]) != 0) { perror_log("close envelope pipe"); } if (pid == qq_pid) { perror_log("we were waiting for ripmime to die, but qq died first"); } else { perror_log("unexpected pid died"); } while ((pid = wait(&status)) == (pid_t) -1 && errno == EINTR); if (pid == ripmime_pid) { perror_log("we were waiting for qq to die, but ripmime died"); } else { perror_log("unexpected pid died"); } wait_everybody_and_die(99); } return 0; } static int safe_write(const int fd, const void *buf_, size_t count) { ssize_t written; register const char *buf = (const char *) buf_; while (count > (size_t) 0U) { for (;;) { if ((written = write(fd, buf, count)) <= (ssize_t) 0) { if (errno == EAGAIN) { sleep(1); } else if (errno != EINTR) { return -1; } continue; } break; } buf += written; count -= written; } return 0; } static int add_received(void) { static const char *months[] = { "Jan", "Feb", "Mar", "Apr", "May", "Jun", "Jul", "Aug", "Sep", "Oct", "Nov", "Dec" }; char date[256]; struct tm *tm; if ((tm = gmtime(&now)) == NULL || tm->tm_mon < 0 || tm->tm_mon > 11) { return -1; } (void) snprintf(date, sizeof date, "Received: (by the qscan mail filter); " "%d %s %d %02d:%02d:%02d +0000\n", tm->tm_mday, months[tm->tm_mon], tm->tm_year + 1900, tm->tm_hour, tm->tm_min, tm->tm_sec); return safe_write(qq_pipe[1], date, strlen(date)); } static void timeout(int sig) { (void) sig; wait_everybody_and_die(52); } static void check_bypass(void) { if (getenv("QS_BYPASS") == NULL && getenv("TCPREMOTEIP") != NULL) { return; } (void) execlp(QMAIL_QUEUE, QMAIL_QUEUE, (char *) NULL); exit(99); } static int inject_message(void) { char buf[MSG_BUFSIZE]; ssize_t len; ssize_t ripmime_written; ssize_t qq_written; ssize_t written; for (;;) { if ((len = read(0, buf, sizeof buf)) < (ssize_t) 0) { if (errno == EINTR) { continue; } perror_log("read() troubles when reading the message feed"); return -1; } if (len == (ssize_t) 0) { return 0; } ripmime_written = qq_written = (ssize_t) 0; do { if ((written = write(ripmime_pipe[1], buf + ripmime_written, (size_t) (len - ripmime_written))) < (ssize_t) 0) { if (errno == EINTR) { continue; } perror_log("write() troubles when feeding ripmime"); return -1; } ripmime_written += written; if ((written = write(qq_pipe[1], buf + qq_written, (size_t) (len - qq_written))) < (ssize_t) 0) { if (errno == EINTR) { continue; } perror_log("write() troubles when feeding qq"); return -1; } qq_written += written; } while (ripmime_written < len || qq_written < len); } } static int inject_envelope(void) { char buf[ENVELOPE_BUFSIZE]; ssize_t len; for (;;) { if ((len = read(1, buf, sizeof buf)) < (ssize_t) 0) { if (errno == EINTR) { continue; } perror_log("read() troubles when reading the envelope"); return -1; } if (len == (ssize_t) 0) { return 0; } if (safe_write(qq_pipe_envelope[1], buf, (size_t) len) != 0) { perror_log("write() troubles when feeding the envelope"); return -1; } } } int main(void) { int nbviruses; (void) signal(SIGALRM, timeout); (void) alarm(QSCAN_TIMEOUT); now = time(NULL); check_bypass(); if (create_destdir() != 0) { perror_log("unable to create the destination directory"); return 1; } if (spawn_ripmime() != 0) { perror_log("unable to spawn ripmime"); return 1; } if (spawn_qq() != 0) { perror_log("unable to spawn qq"); return 1; } if (add_received() != 0) { perror_log("unable to add the received line"); wait_everybody_and_die(99); } if (inject_message() != 0) { perror_log("unable to inject message"); wait_everybody_and_die(99); } if (close(ripmime_pipe[1]) != 0) { perror_log("close ripmime pipe"); wait_everybody_and_die(99); } if (wait_ripmime() != 0) { perror_log("troubles when waiting for ripmime"); wait_everybody_and_die(99); } if ((nbviruses = viruscan_destdir()) < 0) { write_log(LOG_INFO, "virus scanning delayed"); wait_everybody_and_die(99); } if (nbviruses != 0) { write_log(LOG_INFO, "delivery from [%s] refused", getenv("TCPREMOTEIP")); wait_everybody_and_die(39); } if (inject_envelope() != 0) { perror_log("unable to inject the envelope to qq"); wait_everybody_and_die(99); } if (close(qq_pipe[1]) != 0) { perror_log("close qq pipe"); wait_everybody_and_die(99); } if (close(qq_pipe_envelope[1]) != 0) { perror_log("close envelope pipe"); wait_everybody_and_die(99); } wait_everybody_and_die(0); return 0; } qscan-1.2/src/qscan.h0000644000175000006270000000755207546763634010246 #ifndef __QSCAN_H__ #define __QSCAN_H__ 1 #ifndef __GNUC__ # ifdef __attribute__ # undef __attribute__ # endif # define __attribute__(a) #endif #include #ifdef STDC_HEADERS # include # include # include #else # if HAVE_STDLIB_H # include # endif #endif #ifdef HAVE_STRING_H # if !STDC_HEADERS && HAVE_MEMORY_H # include # endif # include #else # if HAVE_STRINGS_H # include # endif #endif #include #include #include #ifdef HAVE_UNISTD_H # include #endif #ifdef TIME_WITH_SYS_TIME # include # include #else # if HAVE_SYS_TIME_H # include # else # include # endif #endif #include #include #include #ifdef HAVE_SYS_RESOURCE_H # include #endif #ifdef HAVE_SYS_PARAM_H # include #endif #include #ifdef HAVE_DIRENT_H # include #endif #ifdef HAVE_SYS_NDIR_H # include #endif #ifdef HAVE_NDIR_H # include #endif #ifdef HAVE_ALLOCA # ifdef HAVE_ALLOCA_H # include # endif # define ALLOCA(X) alloca(X) # define ALLOCA_FREE(X) do { } while (0) #else # define ALLOCA(X) malloc(X) # define ALLOCA_FREE(X) free(X) #endif #include "mysnprintf.h" extern int errno; #ifndef O_NOFOLLOW # define O_NOFOLLOW 0 #endif #ifndef O_DIRECTORY # define O_DIRECTORY 0 #endif #ifndef MAP_FILE # define MAP_FILE 0 #endif #if !defined(O_NDELAY) && defined(O_NONBLOCK) # define O_NDELAY O_NONBLOCK #endif #ifndef FNDELAY # define FNDELAY O_NDELAY #endif #ifdef STAT_MACROS_BROKEN # undef S_ISBLK # undef S_ISCHR # undef S_ISDIR # undef S_ISFIFO # undef S_ISLNK # undef S_ISMPB # undef S_ISMPC # undef S_ISNWK # undef S_ISREG # undef S_ISSOCK #endif /* STAT_MACROS_BROKEN. */ #ifndef S_IFMT # define S_IFMT 0170000 #endif #if !defined(S_ISBLK) && defined(S_IFBLK) # define S_ISBLK(m) (((m) & S_IFMT) == S_IFBLK) #endif #if !defined(S_ISCHR) && defined(S_IFCHR) # define S_ISCHR(m) (((m) & S_IFMT) == S_IFCHR) #endif #if !defined(S_ISDIR) && defined(S_IFDIR) # define S_ISDIR(m) (((m) & S_IFMT) == S_IFDIR) #endif #if !defined(S_ISREG) && defined(S_IFREG) # define S_ISREG(m) (((m) & S_IFMT) == S_IFREG) #endif #if !defined(S_ISFIFO) && defined(S_IFIFO) # define S_ISFIFO(m) (((m) & S_IFMT) == S_IFIFO) #endif #if !defined(S_ISLNK) && defined(S_IFLNK) # define S_ISLNK(m) (((m) & S_IFMT) == S_IFLNK) #endif #if !defined(S_ISSOCK) && defined(S_IFSOCK) # define S_ISSOCK(m) (((m) & S_IFMT) == S_IFSOCK) #endif #if !defined(S_ISMPB) && defined(S_IFMPB) /* V7 */ # define S_ISMPB(m) (((m) & S_IFMT) == S_IFMPB) # define S_ISMPC(m) (((m) & S_IFMT) == S_IFMPC) #endif #if !defined(S_ISNWK) && defined(S_IFNWK) /* HP/UX */ # define S_ISNWK(m) (((m) & S_IFMT) == S_IFNWK) #endif #ifndef S_IEXEC # define S_IEXEC S_IXUSR #endif #ifndef S_IXUSR # define S_IXUSR S_IEXEC #endif #ifndef S_IXGRP # define S_IXGRP (S_IEXEC >> 3) #endif #ifndef S_IXOTH # define S_IXOTH (S_IEXEC >> 6) #endif #ifndef S_IXUGO # define S_IXUGO (S_IXUSR | S_IXGRP | S_IXOTH) #endif #ifndef MAXPATHLEN # ifdef PATH_MAX # define MAXPATHLEN PATH_MAX # else # define MAXPATHLEN 65536U Warning: neither PATH_MAX nor MAXPAHLEN were found. Remove these lines if you really want to compile the server, but the server may be insecure if a wrong value is set here. # endif #endif #define QSCAN_TIMEOUT 3000 #define RIPMIME_DESTDIR_BASE "/var/qmail/qscan" #define RIPMIME_ARGS "-i", "-", "-d" #define SWEEP_ARGS "-ss", "-zip", "-arj", "-rar", "-cab", "-tnef" #define SWEEP_VIRUS_PREFIX ">>> " #define SWEEP_TIMEOUT 250 #define SWEEP_NICE 15 #define MSG_BUFSIZE 8192 #define ENVELOPE_BUFSIZE 4096 #define AV_LINE_MAX 4096 #ifndef SCAN_CONCURRENCY # define SCAN_CONCURRENCY 10 #endif #define SCAN_MAX_RETRIES 30 #define SCAN_DELAY_BETWEEN_RETRIES 2 #endif qscan-1.2/src/qscan_p.h0000644000175000006270000000044507546574321010550 #ifndef __QSCAN_P_H__ #define __QSCAN_P_H__ 1 static pid_t ripmime_pid; static int ripmime_pipe[2]; static pid_t qq_pid; static int qq_pipe[2]; static int qq_pipe_envelope[2]; static pid_t av_pid; static int av_pipe[2]; static char ripmime_destdir[MAXPATHLEN]; static time_t now; #endif